All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Hans-Peter Jansen" <hpj-2x7n3sizJbFeoWH0uzbU5w@public.gmane.org>
To: linux-nfs@vger.kernel.org
Subject: Re: klibc's nfsmount failure with 2.6.27.21, while 2.6.25.20 was fine
Date: Wed, 15 Apr 2009 21:16:48 +0200	[thread overview]
Message-ID: <200904152116.48337.hpj@urpla.net> (raw)
In-Reply-To: <BCC012A8-842D-4699-917C-47ADF25446C7@oracle.com>

[-- Attachment #1: Type: text/plain, Size: 2290 bytes --]

Am Mittwoch, 15. April 2009 schrieb Chuck Lever:
> On Apr 15, 2009, at 1:23 PM, Hans-Peter Jansen wrote:
> > Am Mittwoch, 15. April 2009 schrieb Chuck Lever:
> >> When using rpcbind instead of portmapper, what does the output of
> >> "rpcinfo" look like on the server?
> >
> > It's dumped in the mail starting this thread.
>
> I don't see why the client's rpcbind attempt for the server's mountd
> service should have failed.

For completeness, here's the current rpcinfo view with portmap:

# rpcinfo -p 172.16.23.110
   Program Vers Proto   Port
    100000    2   tcp    111  portmapper
    100000    2   udp    111  portmapper
    100005    1   udp  54838  mountd
    100005    1   tcp  32772  mountd
    100005    2   udp  54838  mountd
    100005    2   tcp  32772  mountd
    100005    3   udp  54838  mountd
    100005    3   tcp  32772  mountd
    100003    2   udp   2049  nfs
    100003    3   udp   2049  nfs
    100003    4   udp   2049  nfs
    100021    1   udp  35501  nlockmgr
    100021    3   udp  35501  nlockmgr
    100021    4   udp  35501  nlockmgr
    100003    2   tcp   2049  nfs
    100003    3   tcp   2049  nfs
    100003    4   tcp   2049  nfs
    100021    1   tcp  54766  nlockmgr
    100021    3   tcp  54766  nlockmgr
    100021    4   tcp  54766  nlockmgr
    100024    1   udp  44650  status
    100024    1   tcp  39765  status


> Would it be possible for you to capture a packet trace of the client's
> attempt to mount it's root file system?  (You will likely need to do
> this for a bugzilla report, anyway).

Ähem, Chuck, may I ask you to look into the initial mail again. The failing 
case is attached there. Here I've attached the good one. Since I couldn't 
locate any mount attempt in the dump, I've left a few more nfs 
transactions.

> Also let us know what's running on your clients (distribution, kernel
> version, etc).

Hmm, sure. The client setup is a legacy SuSE 9.3 diskless environment 
(unfortunately Novell didn't manage to create a distribution with similar 
stability since then..., being a rpm junke, I will soon check Cent-OS 
(again)).

Client (relevant) versions:
Kernel: 2.6.11.4
Udev (nfsmount): 053

Let me know, what more I can provide, please.

THanks,
Pete

[-- Attachment #2: shark-nfs-mount-ok.dump --]
[-- Type: application/octet-stream, Size: 11534 bytes --]

  reply	other threads:[~2009-04-15 19:16 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-04-15 10:50 klibc's nfsmount failure with 2.6.27.21, while 2.6.25.20 was fine Hans-Peter Jansen
     [not found] ` <200904151250.49372.hpj-2x7n3sizJbFeoWH0uzbU5w@public.gmane.org>
2009-04-15 12:38   ` Trond Myklebust
     [not found]     ` <1239799114.5177.4.camel-rJ7iovZKK19ZJLDQqaL3InhyD016LWXt@public.gmane.org>
2009-04-15 13:48       ` Hans-Peter Jansen
     [not found]         ` <200904151548.12291.hpj-2x7n3sizJbFeoWH0uzbU5w@public.gmane.org>
2009-04-15 14:36           ` Chuck Lever
2009-04-15 17:23             ` Hans-Peter Jansen
     [not found]               ` <200904151923.58709.hpj-2x7n3sizJbFeoWH0uzbU5w@public.gmane.org>
2009-04-15 17:35                 ` Chuck Lever
2009-04-15 19:16                   ` Hans-Peter Jansen [this message]
  -- strict thread matches above, loose matches on Subject: below --
2009-04-15 19:17 Hans-Peter Jansen
     [not found] ` <200904152117.41367.hpj-2x7n3sizJbFeoWH0uzbU5w@public.gmane.org>
2009-04-15 20:52   ` Chuck Lever
2009-04-15 22:48     ` Hans-Peter Jansen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200904152116.48337.hpj@urpla.net \
    --to=hpj-2x7n3sizjbfeowh0uzbu5w@public.gmane.org \
    --cc=linux-nfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.