From: Nick Kossifidis <mick@madwifi-project.org>
To: ath5k-devel@lists.ath5k.org, linux-wireless@vger.kernel.org,
linville@tuxdriver.com
Cc: jirislaby@gmail.com, mcgrof@gmail.com, me@bobcopeland.com,
nbd@openwrt.org
Subject: [PATCH 7/7] ath5k: Add Spur filter support on newer chips
Date: Thu, 16 Apr 2009 03:41:33 +0300 [thread overview]
Message-ID: <20090416004133.GG4138@makis> (raw)
*Add spur filter support for RF5413 and later chips
Can someone test this ? I moved to Athens and i forgot to take the RF2425 with me...
It should be ok as it comes from HAL sources.
Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
---
drivers/net/wireless/ath/ath5k/ath5k.h | 5 +
drivers/net/wireless/ath/ath5k/phy.c | 255 +++++++++++++++++++++++++++++++-
drivers/net/wireless/ath/ath5k/reset.c | 35 ++---
3 files changed, 270 insertions(+), 25 deletions(-)
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index 33da290..8137182 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -1278,6 +1278,11 @@ extern int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *chann
/* PHY calibration */
extern int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel);
extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq);
+/* Spur mitigation */
+bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel);
+void ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel);
/* Misc PHY functions */
extern u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan);
extern int ath5k_hw_phy_disable(struct ath5k_hw *ah);
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index 7e666e6..6f8466d 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -1353,6 +1353,257 @@ int ath5k_hw_phy_calibrate(struct ath5k_hw *ah,
return ret;
}
+/***************************\
+* Spur mitigation functions *
+\***************************/
+
+bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
+{
+ u8 refclk_freq;
+
+ if ((ah->ah_radio == AR5K_RF5112) ||
+ (ah->ah_radio == AR5K_RF5413) ||
+ (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)))
+ refclk_freq = 40;
+ else
+ refclk_freq = 32;
+
+ if ((channel->center_freq % refclk_freq != 0) &&
+ ((channel->center_freq % refclk_freq < 10) ||
+ (channel->center_freq % refclk_freq > 22)))
+ return true;
+ else
+ return false;
+}
+
+void
+ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ u32 mag_mask[4] = {0, 0, 0, 0};
+ u32 pilot_mask[2] = {0, 0};
+ /* Note: fbin values are scaled up by 2 */
+ u16 spur_chan_fbin, chan_fbin, symbol_width, spur_detection_window;
+ s32 spur_delta_phase, spur_freq_sigma_delta;
+ s32 spur_offset, num_symbols_x16;
+ u8 num_symbol_offsets, i, freq_band;
+
+ /* Convert current frequency to fbin value (the same way channels
+ * are stored on EEPROM, check out ath5k_eeprom_bin2freq) and scale
+ * up by 2 so we can compare it later */
+ if (channel->hw_value & CHANNEL_2GHZ) {
+ chan_fbin = (channel->center_freq - 2300) * 10;
+ freq_band = AR5K_EEPROM_BAND_2GHZ;
+ } else {
+ chan_fbin = (channel->center_freq - 4900) * 10;
+ freq_band = AR5K_EEPROM_BAND_5GHZ;
+ }
+
+ /* Check if any spur_chan_fbin from EEPROM is
+ * within our current channel's spur detection range */
+ spur_chan_fbin = AR5K_EEPROM_NO_SPUR;
+ spur_detection_window = AR5K_SPUR_CHAN_WIDTH;
+ /* XXX: Half/Quarter channels ?*/
+ if (channel->hw_value & CHANNEL_TURBO)
+ spur_detection_window *= 2;
+
+ for (i = 0; i < AR5K_EEPROM_N_SPUR_CHANS; i++) {
+ spur_chan_fbin = ee->ee_spur_chans[i][freq_band];
+
+ /* Note: mask cleans AR5K_EEPROM_NO_SPUR flag
+ * so it's zero if we got nothing from EEPROM */
+ if (spur_chan_fbin == AR5K_EEPROM_NO_SPUR) {
+ spur_chan_fbin &= AR5K_EEPROM_SPUR_CHAN_MASK;
+ break;
+ }
+
+ if ((chan_fbin - spur_detection_window <=
+ (spur_chan_fbin & AR5K_EEPROM_SPUR_CHAN_MASK)) &&
+ (chan_fbin + spur_detection_window >=
+ (spur_chan_fbin & AR5K_EEPROM_SPUR_CHAN_MASK))) {
+ spur_chan_fbin &= AR5K_EEPROM_SPUR_CHAN_MASK;
+ break;
+ }
+ }
+
+ /* We need to enable spur filter for this channel */
+ if (spur_chan_fbin) {
+ spur_offset = spur_chan_fbin - chan_fbin;
+ /*
+ * Calculate deltas:
+ * spur_freq_sigma_delta -> spur_offset / sample_freq << 21
+ * spur_delta_phase -> spur_offset / chip_freq << 11
+ * Note: Both values have 100KHz resolution
+ */
+ /* XXX: Half/Quarter rate channels ? */
+ switch (channel->hw_value) {
+ case CHANNEL_A:
+ /* Both sample_freq and chip_freq are 40MHz */
+ spur_delta_phase = (spur_offset << 17) / 25;
+ spur_freq_sigma_delta = (spur_delta_phase >> 10);
+ symbol_width = AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz;
+ break;
+ case CHANNEL_G:
+ /* sample_freq -> 40MHz chip_freq -> 44MHz
+ * (for b compatibility) */
+ spur_freq_sigma_delta = (spur_offset << 8) / 55;
+ spur_delta_phase = (spur_offset << 17) / 25;
+ symbol_width = AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz;
+ break;
+ case CHANNEL_T:
+ case CHANNEL_TG:
+ /* Both sample_freq and chip_freq are 80MHz */
+ spur_delta_phase = (spur_offset << 16) / 25;
+ spur_freq_sigma_delta = (spur_delta_phase >> 10);
+ symbol_width = AR5K_SPUR_SYMBOL_WIDTH_TURBO_100Hz;
+ break;
+ default:
+ return;
+ }
+
+ /* Calculate pilot and magnitude masks */
+
+ /* Scale up spur_offset by 1000 to switch to 100HZ resolution
+ * and divide by symbol_width to find how many symbols we have
+ * Note: number of symbols is scaled up by 16 */
+ num_symbols_x16 = ((spur_offset * 1000) << 4) / symbol_width;
+
+ /* Spur is on a symbol if num_symbols_x16 % 16 is zero */
+ if (!(num_symbols_x16 & 0xF))
+ /* _X_ */
+ num_symbol_offsets = 3;
+ else
+ /* _xx_ */
+ num_symbol_offsets = 4;
+
+ for (i = 0; i < num_symbol_offsets; i++) {
+
+ /* Calculate pilot mask */
+ s32 curr_sym_off =
+ (num_symbols_x16 / 16) + i + 25;
+
+ /* Pilot magnitude mask seems to be a way to
+ * declare the boundaries for our detection
+ * window or something, it's 2 for the middle
+ * value(s) where the symbol is expected to be
+ * and 1 on the boundary values */
+ u8 plt_mag_map =
+ (i == 0 || i == (num_symbol_offsets - 1))
+ ? 1 : 2;
+
+ if (curr_sym_off >= 0 && curr_sym_off <= 32) {
+ if (curr_sym_off <= 25)
+ pilot_mask[0] |= 1 << curr_sym_off;
+ else if (curr_sym_off >= 27)
+ pilot_mask[0] |= 1 << (curr_sym_off - 1);
+ } else if (curr_sym_off >= 33 && curr_sym_off <= 52)
+ pilot_mask[1] |= 1 << (curr_sym_off - 33);
+
+ /* Calculate magnitude mask (for viterbi decoder) */
+ if (curr_sym_off >= -1 && curr_sym_off <= 14)
+ mag_mask[0] |=
+ plt_mag_map << (curr_sym_off + 1) * 2;
+ else if (curr_sym_off >= 15 && curr_sym_off <= 30)
+ mag_mask[1] |=
+ plt_mag_map << (curr_sym_off - 15) * 2;
+ else if (curr_sym_off >= 31 && curr_sym_off <= 46)
+ mag_mask[2] |=
+ plt_mag_map << (curr_sym_off - 31) * 2;
+ else if (curr_sym_off >= 46 && curr_sym_off <= 53)
+ mag_mask[3] |=
+ plt_mag_map << (curr_sym_off - 47) * 2;
+
+ }
+
+ /* Write settings on hw to enable spur filter */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK_CTL,
+ AR5K_PHY_BIN_MASK_CTL_RATE, 0xff);
+ /* XXX: Self correlator also ? */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
+ AR5K_PHY_IQ_PILOT_MASK_EN |
+ AR5K_PHY_IQ_CHAN_MASK_EN |
+ AR5K_PHY_IQ_SPUR_FILT_EN);
+
+ /* Set delta phase and freq sigma delta */
+ ath5k_hw_reg_write(ah,
+ AR5K_REG_SM(spur_delta_phase,
+ AR5K_PHY_TIMING_11_SPUR_DELTA_PHASE) |
+ AR5K_REG_SM(spur_freq_sigma_delta,
+ AR5K_PHY_TIMING_11_SPUR_FREQ_SD) |
+ AR5K_PHY_TIMING_11_USE_SPUR_IN_AGC,
+ AR5K_PHY_TIMING_11);
+
+ /* Write pilot masks */
+ ath5k_hw_reg_write(ah, pilot_mask[0], AR5K_PHY_TIMING_7);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_8,
+ AR5K_PHY_TIMING_8_PILOT_MASK_2,
+ pilot_mask[1]);
+
+ ath5k_hw_reg_write(ah, pilot_mask[0], AR5K_PHY_TIMING_9);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_10,
+ AR5K_PHY_TIMING_10_PILOT_MASK_2,
+ pilot_mask[1]);
+
+ /* Write magnitude masks */
+ ath5k_hw_reg_write(ah, mag_mask[0], AR5K_PHY_BIN_MASK_1);
+ ath5k_hw_reg_write(ah, mag_mask[1], AR5K_PHY_BIN_MASK_2);
+ ath5k_hw_reg_write(ah, mag_mask[2], AR5K_PHY_BIN_MASK_3);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK_CTL,
+ AR5K_PHY_BIN_MASK_CTL_MASK_4,
+ mag_mask[3]);
+
+ ath5k_hw_reg_write(ah, mag_mask[0], AR5K_PHY_BIN_MASK2_1);
+ ath5k_hw_reg_write(ah, mag_mask[1], AR5K_PHY_BIN_MASK2_2);
+ ath5k_hw_reg_write(ah, mag_mask[2], AR5K_PHY_BIN_MASK2_3);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK2_4,
+ AR5K_PHY_BIN_MASK2_4_MASK_4,
+ mag_mask[3]);
+
+ } else if (ath5k_hw_reg_read(ah, AR5K_PHY_IQ) &
+ AR5K_PHY_IQ_SPUR_FILT_EN) {
+ /* Clean up spur mitigation settings and disable fliter */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK_CTL,
+ AR5K_PHY_BIN_MASK_CTL_RATE, 0);
+ AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_IQ,
+ AR5K_PHY_IQ_PILOT_MASK_EN |
+ AR5K_PHY_IQ_CHAN_MASK_EN |
+ AR5K_PHY_IQ_SPUR_FILT_EN);
+ ath5k_hw_reg_write(ah, 0, AR5K_PHY_TIMING_11);
+
+ /* Clear pilot masks */
+ ath5k_hw_reg_write(ah, 0, AR5K_PHY_TIMING_7);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_8,
+ AR5K_PHY_TIMING_8_PILOT_MASK_2,
+ 0);
+
+ ath5k_hw_reg_write(ah, 0, AR5K_PHY_TIMING_9);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_10,
+ AR5K_PHY_TIMING_10_PILOT_MASK_2,
+ 0);
+
+ /* Clear magnitude masks */
+ ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK_1);
+ ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK_2);
+ ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK_3);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK_CTL,
+ AR5K_PHY_BIN_MASK_CTL_MASK_4,
+ 0);
+
+ ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK2_1);
+ ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK2_2);
+ ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK2_3);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK2_4,
+ AR5K_PHY_BIN_MASK2_4_MASK_4,
+ 0);
+ }
+}
+
+/********************\
+ Misc PHY functions
+\********************/
+
int ath5k_hw_phy_disable(struct ath5k_hw *ah)
{
ATH5K_TRACE(ah->ah_sc);
@@ -1362,10 +1613,6 @@ int ath5k_hw_phy_disable(struct ath5k_hw *ah)
return 0;
}
-/********************\
- Misc PHY functions
-\********************/
-
/*
* Get the PHY Chip revision
*/
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index 69d6860..386bc8b 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -537,26 +537,6 @@ static void ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable)
return;
}
-static bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
- struct ieee80211_channel *channel)
-{
- u8 refclk_freq;
-
- if ((ah->ah_radio == AR5K_RF5112) ||
- (ah->ah_radio == AR5K_RF5413) ||
- (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)))
- refclk_freq = 40;
- else
- refclk_freq = 32;
-
- if ((channel->center_freq % refclk_freq != 0) &&
- ((channel->center_freq % refclk_freq < 10) ||
- (channel->center_freq % refclk_freq > 22)))
- return true;
- else
- return false;
-}
-
/* TODO: Half/Quarter rate */
static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah,
struct ieee80211_channel *channel)
@@ -999,7 +979,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
ath5k_hw_tweak_initval_settings(ah, channel);
/*
- * Set TX power (FIXME)
+ * Set TX power
*/
ret = ath5k_hw_txpower(ah, channel, ee_mode,
ah->ah_txpower.txp_max_pwr / 2);
@@ -1025,9 +1005,22 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
/* Write OFDM timings on 5212*/
if (ah->ah_version == AR5K_AR5212 &&
channel->hw_value & CHANNEL_OFDM) {
+ struct ath5k_eeprom_info *ee =
+ &ah->ah_capabilities.cap_eeprom;
+
ret = ath5k_hw_write_ofdm_timings(ah, channel);
if (ret)
return ret;
+
+ /* Note: According to docs we can have a newer
+ * EEPROM on old hardware, so we need to verify
+ * that our hardware is new enough to have spur
+ * mitigation registers (delta phase etc) */
+ if (ah->ah_mac_srev >= AR5K_SREV_AR5424 ||
+ (ah->ah_mac_srev >= AR5K_SREV_AR5424 &&
+ ee->ee_version >= AR5K_EEPROM_VERSION_5_3))
+ ath5k_hw_set_spur_mitigation_filter(ah,
+ channel);
}
/*Enable/disable 802.11b mode on 5111
reply other threads:[~2009-04-16 0:41 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090416004133.GG4138@makis \
--to=mick@madwifi-project.org \
--cc=ath5k-devel@lists.ath5k.org \
--cc=jirislaby@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=mcgrof@gmail.com \
--cc=me@bobcopeland.com \
--cc=nbd@openwrt.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.