From: Magnus Damm <magnus.damm@gmail.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH] sh: TMU platform data for sh7722
Date: Fri, 01 May 2009 06:58:52 +0000 [thread overview]
Message-ID: <20090501065852.8861.19090.sendpatchset@rx1.opensource.se> (raw)
From: Magnus Damm <damm@igel.co.jp>
This patch adds TMU platform data for sh7722. Only clockevent
mode is enabled for now, clocksource requires this patch:
"clocksource: setup mult_orig in clocksource_enable()"
Signed-off-by: Magnus Damm <damm@igel.co.jp>
---
arch/sh/Kconfig | 1
arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 99 ++++++++++++++++++++++++++++++++
2 files changed, 100 insertions(+)
--- 0007/arch/sh/Kconfig
+++ work/arch/sh/Kconfig 2009-05-01 13:22:50.000000000 +0900
@@ -423,6 +423,7 @@ config CPU_SUBTYPE_SH7722
select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_NUMA
select SYS_SUPPORTS_CMT
+ select SYS_SUPPORTS_TMU
config CPU_SUBTYPE_SH7366
bool "Support SH7366 processor"
--- 0001/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ work/arch/sh/kernel/cpu/sh4a/setup-sh7722.c 2009-05-01 13:32:49.000000000 +0900
@@ -14,6 +14,7 @@
#include <linux/mm.h>
#include <linux/uio_driver.h>
#include <linux/sh_cmt.h>
+#include <linux/sh_tmu.h>
#include <asm/clock.h>
#include <asm/mmzone.h>
@@ -209,6 +210,98 @@ static struct platform_device cmt_device
.num_resources = ARRAY_SIZE(cmt_resources),
};
+static struct sh_tmu_config tmu0_platform_data = {
+ .name = "TMU0",
+ .channel_offset = 0x04,
+ .timer_bit = 0,
+ .clk = "tmu0",
+ .clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+ [0] = {
+ .name = "TMU0",
+ .start = 0xffd80008,
+ .end = 0xffd80013,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 16,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu0_device = {
+ .name = "sh_tmu",
+ .id = 0,
+ .dev = {
+ .platform_data = &tmu0_platform_data,
+ },
+ .resource = tmu0_resources,
+ .num_resources = ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_tmu_config tmu1_platform_data = {
+ .name = "TMU1",
+ .channel_offset = 0x10,
+ .timer_bit = 1,
+ .clk = "tmu0",
+ .clocksource_rating = 0, /* disabled for now */
+};
+
+static struct resource tmu1_resources[] = {
+ [0] = {
+ .name = "TMU1",
+ .start = 0xffd80014,
+ .end = 0xffd8001f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 17,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu1_device = {
+ .name = "sh_tmu",
+ .id = 1,
+ .dev = {
+ .platform_data = &tmu1_platform_data,
+ },
+ .resource = tmu1_resources,
+ .num_resources = ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_tmu_config tmu2_platform_data = {
+ .name = "TMU2",
+ .channel_offset = 0x1c,
+ .timer_bit = 2,
+ .clk = "tmu0",
+};
+
+static struct resource tmu2_resources[] = {
+ [0] = {
+ .name = "TMU2",
+ .start = 0xffd80020,
+ .end = 0xffd8002b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 18,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu2_device = {
+ .name = "sh_tmu",
+ .id = 2,
+ .dev = {
+ .platform_data = &tmu2_platform_data,
+ },
+ .resource = tmu2_resources,
+ .num_resources = ARRAY_SIZE(tmu2_resources),
+};
+
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xffe00000,
@@ -243,6 +336,9 @@ static struct platform_device sci_device
static struct platform_device *sh7722_devices[] __initdata = {
&cmt_device,
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
&rtc_device,
&usbf_device,
&iic_device,
@@ -271,6 +367,9 @@ __initcall(sh7722_devices_setup);
static struct platform_device *sh7722_early_devices[] __initdata = {
&cmt_device,
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
};
void __init plat_early_device_setup(void)
reply other threads:[~2009-05-01 6:58 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090501065852.8861.19090.sendpatchset@rx1.opensource.se \
--to=magnus.damm@gmail.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.