From: Florian Fainelli <florian@openwrt.org>
To: netdev@vger.kernel.org, grundler@parisc-linux.org, kyle@mcmartin.ca
Subject: tulip_rxtx_stop() on Cobalt Qube2
Date: Fri, 1 May 2009 12:38:57 +0200 [thread overview]
Message-ID: <200905011238.59345.florian@openwrt.org> (raw)
Hi Grant, Kyle,
I just updated my Qube2 to run a 2.6.30-rc2-00476-gd678033 kernel (also seen
on a 2.6.29-rc2-00462-gfa04b54) and I get the following message while booting
the box now, I have not git bisected the offending commit yet :
[snip]
Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007)
PCI: Enabling device 0000:00:07.0 (0045 -> 0047)
tulip0: Old format EEPROM on 'Cobalt Microserver' board. Using substitute
media control info.
tulip0: EEPROM default media type Autosense.
tulip0: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
tulip0: MII transceiver #1 config 1000 status 7809 advertising 01e1.
eth0: Digital DS21142/43 Tulip rev 65 at MMIO 0x12082000, 00:10:e0:00:7d:1f,
IRQ 19.
PCI: Enabling device 0000:00:0c.0 (0005 -> 0007)
tulip1: Old format EEPROM on 'Cobalt Microserver' board. Using substitute
media control info.
tulip1: EEPROM default media type Autosense.
tulip1: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
tulip1: MII transceiver #1 config 1000 status 7809 advertising 01e1.
eth1: Digital DS21142/43 Tulip rev 65 at MMIO 0x12082400, 00:10:e0:00:88:b9,
IRQ 20.
[snip]
0000:00:07.0: tulip_stop_rxtx() failed (CSR5 0xf0660000 CSR6 0xb20e2202)
eth0: Setting full-duplex based on MII#1 link partner capability of 45e1.
The interface is still fully functional, shall we increase the timeount in
tulip_stop_rxtx() to prevent this message from appearing ?
Thanks a lot in advance for your answer.
--
Best regards, Florian Fainelli
Email : florian@openwrt.org
http://openwrt.org
-------------------------------
next reply other threads:[~2009-05-01 10:39 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-01 10:38 Florian Fainelli [this message]
2009-05-03 11:32 ` tulip_rxtx_stop() on Cobalt Qube2 Grant Grundler
2009-05-03 19:45 ` Florian Fainelli
2009-05-31 1:40 ` Grant Grundler
2009-05-31 21:02 ` Florian Fainelli
2009-05-31 23:43 ` Grant Grundler
2009-06-07 18:27 ` Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200905011238.59345.florian@openwrt.org \
--to=florian@openwrt.org \
--cc=grundler@parisc-linux.org \
--cc=kyle@mcmartin.ca \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.