Re: [PATCH] FM1216ME_MK3 some changes

[Dmitri Belimov <d.belimov@gmail.com>]

Hi All.

> [snip]
> > > 
> > > Channel designations I dug out of ivtv-tune:
> > > 
> > > S38 439.250 MHz (European cable)
> > > H18 439.250 MHz (SECAM France)
> > > 47  440.250 MHz (PAL China)
> > > 059 440.250 MHz (PAL Argentina)
> > > 
> > > come close, but are unaffected by the change from 442 to 441 as
> > > the bandswitch cutover point.  These channels fall right on top
> > > of the cutover, but are not affected by the proposed change in
> > > any meaningful way.  The VHF-High filter and VCO would still be
> > > used.  Dmitri's proposed change is a "don't care" unless the
> > > cutover point is changed to 440 MHz. 
> > > 
> > > 
> > > Let's pretend that the proposed cutover point is 440 MHz.
> 
> NO! it is not
> 
> Dmitri,
> 
> can you cut one off and tell us what it is all about ?
> 
> Unless you do so, all other is pointless and I likely stop to
> participate in such stuff.

Sorry my delay. I lost subject of discussion. What main question??

1. AGC TOP of RF part - I think need support for MK3
2. Changing to 441MHz is not critical. We can write some information about this case to Wiki or docs.

With my best regards, Dmitry.

> 
> Cheers,
> Hermann
> 
> 
> 
> 
>