From: Wu Fengguang <fengguang.wu@intel.com>
To: Andrew Morton <akpm@linux-foundation.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
linux-ide@vger.kernel.org, jgarzik@pobox.com
Cc: Tejun Heo <htejun@gmail.com>
Subject: [mmotm 2009-04-30] ata: failed to IDENTIFY
Date: Sun, 10 May 2009 19:47:59 +0800 [thread overview]
Message-ID: <20090510114759.GA7577@localhost> (raw)
Hi,
I got this warning message for mmotm 2009-04-30.
linux-next 20090417 and 20090504 are all OK.
[ 5981.492777] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 5981.499939] ata1.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 5981.499942] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 5981.513751] ata1.00: status: { DRDY }
[ 5981.517525] ata1: hard resetting link
[ 5981.852721] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5986.860644] ------------[ cut here ]------------
[ 5986.864611] WARNING: at drivers/ata/libata-core.c:4957 warn_slowpath_null+0x17/0x20()
[ 5986.864611] Hardware name: HP Compaq 6910p
[ 5986.864611] Modules linked in: drm iwlagn iwlcore snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq snd_o
[ 5986.864611] Pid: 1123, comm: scsi_eh_0 Not tainted 2.6.30-rc4-mm1 #223
[ 5986.864611] Call Trace:
[ 5986.864611] [<ffffffff810493c8>] warn_slowpath_fmt+0xd8/0x130
[ 5986.864611] [<ffffffff81012ad0>] ? native_sched_clock+0x20/0x70
[ 5986.864611] [<ffffffff81012ad0>] ? native_sched_clock+0x20/0x70
[ 5986.864611] [<ffffffff81012b29>] ? sched_clock+0x9/0x10
[ 5986.864611] [<ffffffff8105e958>] ? __cancel_work_timer+0xc8/0x250
[ 5986.864611] [<ffffffff81012ad0>] ? native_sched_clock+0x20/0x70
[ 5986.864611] [<ffffffff8154bcc0>] ? _spin_unlock_irq+0x30/0x40
[ 5986.864611] [<ffffffff8107673d>] ? trace_hardirqs_on_caller+0x16d/0x1c0
[ 5986.864611] [<ffffffff81049437>] warn_slowpath_null+0x17/0x20
[ 5986.864611] [<ffffffff8134da26>] ata_qc_complete+0x1e6/0x260
[ 5986.864611] [<ffffffff8135ad9a>] ata_do_link_abort+0xaa/0x100
[ 5986.864611] [<ffffffff8135ae00>] ata_port_abort+0x10/0x20
[ 5986.864611] [<ffffffff8135ae3f>] ata_port_freeze+0x2f/0x50
[ 5986.864611] [<ffffffff8134ea12>] ata_exec_internal_sg+0x582/0x600
[ 5986.864611] [<ffffffff8154901b>] ? wait_for_common+0x16b/0x190
[ 5986.864611] [<ffffffff8134eb0f>] ata_exec_internal+0x7f/0xb0
[ 5986.864611] [<ffffffff8134eefa>] ata_do_dev_read_id+0x2a/0x30
[ 5986.864611] [<ffffffff8134f256>] ata_dev_read_id+0x356/0x530
[ 5986.864611] [<ffffffff8134f5c8>] ata_dev_reread_id+0x48/0x1e0
[ 5986.864611] [<ffffffff81012ad0>] ? native_sched_clock+0x20/0x70
[ 5986.864611] [<ffffffff81012b29>] ? sched_clock+0x9/0x10
[ 5986.864611] [<ffffffff8154bd14>] ? _spin_unlock_irqrestore+0x44/0x80
[ 5986.864611] [<ffffffff8107673d>] ? trace_hardirqs_on_caller+0x16d/0x1c0
[ 5986.864611] [<ffffffff81350e62>] ata_dev_revalidate+0x112/0x190
[ 5986.864611] [<ffffffff81359f2d>] ata_eh_recover+0x6bd/0xee0
[ 5986.864611] [<ffffffff81363d50>] ? ahci_postreset+0x0/0x60
[ 5986.864611] [<ffffffff81363080>] ? ahci_hardreset+0x0/0x160
[ 5986.864611] [<ffffffff81362f80>] ? ahci_softreset+0x0/0x60
[ 5986.864611] [<ffffffff8134d220>] ? ata_std_prereset+0x0/0xd0
[ 5986.864611] [<ffffffff8135fb3b>] sata_pmp_error_handler+0xeb/0xc50
[ 5986.864611] [<ffffffff81012ad0>] ? native_sched_clock+0x20/0x70
[ 5986.864611] [<ffffffff81012b29>] ? sched_clock+0x9/0x10
[ 5986.864611] [<ffffffff81363d3a>] ahci_error_handler+0x4a/0x60
[ 5986.864611] [<ffffffff8135b5a5>] ata_scsi_error+0x495/0x820
[ 5986.864611] [<ffffffff81335d7d>] scsi_error_handler+0xed/0x3d0
[ 5986.864611] [<ffffffff81335c90>] ? scsi_error_handler+0x0/0x3d0
[ 5986.864611] [<ffffffff81062dc6>] kthread+0xa6/0xc0
[ 5986.864611] [<ffffffff8100d20a>] child_rip+0xa/0x20
[ 5986.864611] [<ffffffff8100cbd0>] ? restore_args+0x0/0x30
[ 5986.864611] [<ffffffff81062d20>] ? kthread+0x0/0xc0
[ 5986.864611] [<ffffffff8100d200>] ? child_rip+0x0/0x20
[ 5986.864611] ---[ end trace 87eb9470166678e1 ]---
[ 5986.864611] ata1.00: qc timeout (cmd 0xec)
[ 5987.153668] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 5987.159861] ata1.00: revalidation failed (errno=-5)
[ 5987.164854] ata1: hard resetting link
[ 5987.500647] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5997.508508] ata1.00: qc timeout (cmd 0xec)
[ 5997.512720] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 5997.518913] ata1.00: revalidation failed (errno=-5)
[ 5997.523893] ata1: limiting SATA link speed to 1.5 Gbps
[ 5997.529149] ata1: hard resetting link
[ 5997.860516] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 6027.868126] ata1.00: qc timeout (cmd 0xec)
[ 6027.872339] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 6027.878530] ata1.00: revalidation failed (errno=-5)
[ 6027.883507] ata1.00: disabled
[ 6027.886603] ata1: hard resetting link
[ 6028.220134] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 6028.226450] ata1: EH complete
[ 6028.229748] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 6028.237583] Restarting system.
[ 6028.240745] machine restart
Thanks,
Fengguang
next reply other threads:[~2009-05-10 11:48 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-10 11:47 Wu Fengguang [this message]
2009-05-10 23:25 ` [mmotm 2009-04-30] ata: failed to IDENTIFY Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090510114759.GA7577@localhost \
--to=fengguang.wu@intel.com \
--cc=akpm@linux-foundation.org \
--cc=htejun@gmail.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.