From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Delvare Date: Mon, 11 May 2009 08:55:07 +0000 Subject: Re: [lm-sensors] 5VSB computing on it87 Message-Id: <20090511105507.0bbdc850@hyperion.delvare> List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org On Mon, 11 May 2009 10:07:30 +0200, Mr. Tux wrote: > My Foxconn A7GM-S keep showing the wrong Voltage of 5VSB sensor. > > This one shows up in BIOS as well, so it is connected and should indicate about 5.02V > > But 'sensors' with it87 module loaded keeps showing 6.85V - how to change the compute > line in order to get the 5.02V? > > At the moment the compute line is the default: > > compute in7 ((6.8/10)+1)*@ , @/((6.8/10)+1) I can't help but notice that 6.85 = ((6.8/10)+1)*4.08. The IT87xxF chips have a 4.08V DAC, meaning that this input channel is saturated. Thus I pretty much doubt it corresponds to your 5VSB line. -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors