From: Jarod Wilson <jarod@redhat.com>
To: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Neil Horman <nhorman@tuxdriver.com>,
linux-crypto@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2] crypto: tcrypt: do not exit on success in fips mode
Date: Wed, 13 May 2009 12:40:10 -0400 [thread overview]
Message-ID: <200905131240.11615.jarod@redhat.com> (raw)
In-Reply-To: <20090513140329.GA17863@gondor.apana.org.au>
On Wednesday 13 May 2009 10:03:29 Herbert Xu wrote:
> On Wed, May 13, 2009 at 09:37:32AM -0400, Jarod Wilson wrote:
> >
> > The latter option is more or less what the patch at the start of this
> > thread did, although via a param to tcrypt, not keying off the fips
> > flag. If I were to modify the patch to drop the mod param usage, and
> > instead key off the fips flag to not exit, would that be acceptable
> > for committing until such time as the userspace interface is ready?
>
> Yes that sounds like the way to go.
Okay, here it is.
At present, the tcrypt module always exits with an -EAGAIN upon
successfully completing all the tests its been asked to run. In fips
mode, integrity checking is done by running all self-tests from the
initrd, and its much simpler to check the ret from modprobe for
success than to scrape dmesg and/or /proc/crypto. Simply stay
loaded, giving modprobe a retval of 0, if self-tests all pass and
we're in fips mode.
A side-effect of tracking success/failure for fips mode is that in
non-fips mode, self-test failures will return the actual failure
return codes, rather than always returning -EAGAIN, which seems more
correct anyway.
The tcrypt_test() portion of the patch is dependent on my earlier
pair of patches that skip non-fips algs in fips mode, at least to
achieve the fully intended behavior.
Nb: testing this patch against the cryptodev tree revealed a test
failure for sha384, which I have yet to look into...
Signed-off-by: Jarod Wilson <jarod@redhat.com>
---
crypto/tcrypt.c | 164 ++++++++++++++++++++++++++++++-------------------------
1 files changed, 90 insertions(+), 74 deletions(-)
diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c
index 9e4974e..d59ba50 100644
--- a/crypto/tcrypt.c
+++ b/crypto/tcrypt.c
@@ -27,6 +27,7 @@
#include <linux/timex.h>
#include <linux/interrupt.h>
#include "tcrypt.h"
+#include "internal.h"
/*
* Need slab memory for testing (size in number of pages).
@@ -468,248 +469,255 @@ static void test_available(void)
static inline int tcrypt_test(const char *alg)
{
- return alg_test(alg, alg, 0, 0);
+ int ret;
+
+ ret = alg_test(alg, alg, 0, 0);
+ /* non-fips algs return -EINVAL in fips mode */
+ if (fips_enabled && ret == -EINVAL)
+ ret = 0;
+ return ret;
}
-static void do_test(int m)
+static int do_test(int m)
{
int i;
+ int ret = 0;
switch (m) {
case 0:
for (i = 1; i < 200; i++)
- do_test(i);
+ ret += do_test(i);
break;
case 1:
- tcrypt_test("md5");
+ ret += tcrypt_test("md5");
break;
case 2:
- tcrypt_test("sha1");
+ ret += tcrypt_test("sha1");
break;
case 3:
- tcrypt_test("ecb(des)");
- tcrypt_test("cbc(des)");
+ ret += tcrypt_test("ecb(des)");
+ ret += tcrypt_test("cbc(des)");
break;
case 4:
- tcrypt_test("ecb(des3_ede)");
- tcrypt_test("cbc(des3_ede)");
+ ret += tcrypt_test("ecb(des3_ede)");
+ ret += tcrypt_test("cbc(des3_ede)");
break;
case 5:
- tcrypt_test("md4");
+ ret += tcrypt_test("md4");
break;
case 6:
- tcrypt_test("sha256");
+ ret += tcrypt_test("sha256");
break;
case 7:
- tcrypt_test("ecb(blowfish)");
- tcrypt_test("cbc(blowfish)");
+ ret += tcrypt_test("ecb(blowfish)");
+ ret += tcrypt_test("cbc(blowfish)");
break;
case 8:
- tcrypt_test("ecb(twofish)");
- tcrypt_test("cbc(twofish)");
+ ret += tcrypt_test("ecb(twofish)");
+ ret += tcrypt_test("cbc(twofish)");
break;
case 9:
- tcrypt_test("ecb(serpent)");
+ ret += tcrypt_test("ecb(serpent)");
break;
case 10:
- tcrypt_test("ecb(aes)");
- tcrypt_test("cbc(aes)");
- tcrypt_test("lrw(aes)");
- tcrypt_test("xts(aes)");
- tcrypt_test("ctr(aes)");
- tcrypt_test("rfc3686(ctr(aes))");
+ ret += tcrypt_test("ecb(aes)");
+ ret += tcrypt_test("cbc(aes)");
+ ret += tcrypt_test("lrw(aes)");
+ ret += tcrypt_test("xts(aes)");
+ ret += tcrypt_test("ctr(aes)");
+ ret += tcrypt_test("rfc3686(ctr(aes))");
break;
case 11:
- tcrypt_test("sha384");
+ ret += tcrypt_test("sha384");
break;
case 12:
- tcrypt_test("sha512");
+ ret += tcrypt_test("sha512");
break;
case 13:
- tcrypt_test("deflate");
+ ret += tcrypt_test("deflate");
break;
case 14:
- tcrypt_test("ecb(cast5)");
+ ret += tcrypt_test("ecb(cast5)");
break;
case 15:
- tcrypt_test("ecb(cast6)");
+ ret += tcrypt_test("ecb(cast6)");
break;
case 16:
- tcrypt_test("ecb(arc4)");
+ ret += tcrypt_test("ecb(arc4)");
break;
case 17:
- tcrypt_test("michael_mic");
+ ret += tcrypt_test("michael_mic");
break;
case 18:
- tcrypt_test("crc32c");
+ ret += tcrypt_test("crc32c");
break;
case 19:
- tcrypt_test("ecb(tea)");
+ ret += tcrypt_test("ecb(tea)");
break;
case 20:
- tcrypt_test("ecb(xtea)");
+ ret += tcrypt_test("ecb(xtea)");
break;
case 21:
- tcrypt_test("ecb(khazad)");
+ ret += tcrypt_test("ecb(khazad)");
break;
case 22:
- tcrypt_test("wp512");
+ ret += tcrypt_test("wp512");
break;
case 23:
- tcrypt_test("wp384");
+ ret += tcrypt_test("wp384");
break;
case 24:
- tcrypt_test("wp256");
+ ret += tcrypt_test("wp256");
break;
case 25:
- tcrypt_test("ecb(tnepres)");
+ ret += tcrypt_test("ecb(tnepres)");
break;
case 26:
- tcrypt_test("ecb(anubis)");
- tcrypt_test("cbc(anubis)");
+ ret += tcrypt_test("ecb(anubis)");
+ ret += tcrypt_test("cbc(anubis)");
break;
case 27:
- tcrypt_test("tgr192");
+ ret += tcrypt_test("tgr192");
break;
case 28:
- tcrypt_test("tgr160");
+ ret += tcrypt_test("tgr160");
break;
case 29:
- tcrypt_test("tgr128");
+ ret += tcrypt_test("tgr128");
break;
case 30:
- tcrypt_test("ecb(xeta)");
+ ret += tcrypt_test("ecb(xeta)");
break;
case 31:
- tcrypt_test("pcbc(fcrypt)");
+ ret += tcrypt_test("pcbc(fcrypt)");
break;
case 32:
- tcrypt_test("ecb(camellia)");
- tcrypt_test("cbc(camellia)");
+ ret += tcrypt_test("ecb(camellia)");
+ ret += tcrypt_test("cbc(camellia)");
break;
case 33:
- tcrypt_test("sha224");
+ ret += tcrypt_test("sha224");
break;
case 34:
- tcrypt_test("salsa20");
+ ret += tcrypt_test("salsa20");
break;
case 35:
- tcrypt_test("gcm(aes)");
+ ret += tcrypt_test("gcm(aes)");
break;
case 36:
- tcrypt_test("lzo");
+ ret += tcrypt_test("lzo");
break;
case 37:
- tcrypt_test("ccm(aes)");
+ ret += tcrypt_test("ccm(aes)");
break;
case 38:
- tcrypt_test("cts(cbc(aes))");
+ ret += tcrypt_test("cts(cbc(aes))");
break;
case 39:
- tcrypt_test("rmd128");
+ ret += tcrypt_test("rmd128");
break;
case 40:
- tcrypt_test("rmd160");
+ ret += tcrypt_test("rmd160");
break;
case 41:
- tcrypt_test("rmd256");
+ ret += tcrypt_test("rmd256");
break;
case 42:
- tcrypt_test("rmd320");
+ ret += tcrypt_test("rmd320");
break;
case 43:
- tcrypt_test("ecb(seed)");
+ ret += tcrypt_test("ecb(seed)");
break;
case 44:
- tcrypt_test("zlib");
+ ret += tcrypt_test("zlib");
break;
case 45:
- tcrypt_test("rfc4309(ccm(aes))");
+ ret += tcrypt_test("rfc4309(ccm(aes))");
break;
case 100:
- tcrypt_test("hmac(md5)");
+ ret += tcrypt_test("hmac(md5)");
break;
case 101:
- tcrypt_test("hmac(sha1)");
+ ret += tcrypt_test("hmac(sha1)");
break;
case 102:
- tcrypt_test("hmac(sha256)");
+ ret += tcrypt_test("hmac(sha256)");
break;
case 103:
- tcrypt_test("hmac(sha384)");
+ ret += tcrypt_test("hmac(sha384)");
break;
case 104:
- tcrypt_test("hmac(sha512)");
+ ret += tcrypt_test("hmac(sha512)");
break;
case 105:
- tcrypt_test("hmac(sha224)");
+ ret += tcrypt_test("hmac(sha224)");
break;
case 106:
- tcrypt_test("xcbc(aes)");
+ ret += tcrypt_test("xcbc(aes)");
break;
case 107:
- tcrypt_test("hmac(rmd128)");
+ ret += tcrypt_test("hmac(rmd128)");
break;
case 108:
- tcrypt_test("hmac(rmd160)");
+ ret += tcrypt_test("hmac(rmd160)");
break;
case 150:
- tcrypt_test("ansi_cprng");
+ ret += tcrypt_test("ansi_cprng");
break;
case 200:
@@ -873,6 +881,8 @@ static void do_test(int m)
test_available();
break;
}
+
+ return ret;
}
static int __init tcrypt_mod_init(void)
@@ -886,15 +896,21 @@ static int __init tcrypt_mod_init(void)
goto err_free_tv;
}
- do_test(mode);
+ err = do_test(mode);
+ if (err) {
+ printk(KERN_ERR "tcrypt: one or more tests failed!\n");
+ goto err_free_tv;
+ }
- /* We intentionaly return -EAGAIN to prevent keeping
- * the module. It does all its work from init()
- * and doesn't offer any runtime functionality
+ /* We intentionaly return -EAGAIN to prevent keeping the module,
+ * unless we're running in fips mode. It does all its work from
+ * init() and doesn't offer any runtime functionality, but in
+ * the fips case, checking for a successful load is helpful.
* => we don't need it in the memory, do we?
* -- mludvig
*/
- err = -EAGAIN;
+ if (!fips_enabled)
+ err = -EAGAIN;
err_free_tv:
for (i = 0; i < TVMEMSIZE && tvmem[i]; i++)
--
Jarod Wilson
jarod@redhat.com
next prev parent reply other threads:[~2009-05-13 16:41 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-11 14:06 [PATCH] crypto: tcrypt: add option to not exit on success Jarod Wilson
2009-05-12 20:02 ` Jarod Wilson
2009-05-13 0:37 ` Neil Horman
2009-05-13 1:30 ` Herbert Xu
2009-05-13 11:08 ` Neil Horman
2009-05-13 11:38 ` Herbert Xu
2009-05-13 13:12 ` Jarod Wilson
2009-05-13 13:27 ` Herbert Xu
2009-05-13 13:37 ` Jarod Wilson
2009-05-13 14:03 ` Herbert Xu
2009-05-13 16:40 ` Jarod Wilson [this message]
2009-05-13 17:32 ` [PATCH v2] crypto: tcrypt: do not exit on success in fips mode Neil Horman
2009-05-27 5:10 ` Herbert Xu
2009-05-13 14:02 ` [PATCH] crypto: tcrypt: add option to not exit on success Neil Horman
2009-05-13 16:53 ` Jarod Wilson
2009-05-13 23:45 ` Herbert Xu
2009-05-14 12:48 ` Jarod Wilson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200905131240.11615.jarod@redhat.com \
--to=jarod@redhat.com \
--cc=herbert@gondor.apana.org.au \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nhorman@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.