All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] common/cmd_ide.c: Coding style cleanup (Lindent)
Date: Wed, 13 May 2009 16:20:39 +0200	[thread overview]
Message-ID: <200905131620.39726.sr@denx.de> (raw)
In-Reply-To: <20090513113209.060AC832E416@gemini.denx.de>

Hi Wolfgang,

On Wednesday 13 May 2009 13:32:08 Wolfgang Denk wrote:
> > Not sure if this patch will be accepted. It's probably not so easy to
> > understand the history of changes in this file with this coding style
> > cleanup. But the current condition is so bad that I think it's worth
> > the change.
>
> Another argument against the patch is that it makes the code in some
> places more ugly...
>
> > -const static pio_config_t pio_config_ns [IDE_MAX_PIO_MODE+1] =
> > -{
> > -    /*	Setup  Length  Hold  */
> > -	{ 70,	165,	30 },		/* PIO-Mode 0, [ns]	*/
> > -	{ 50,	125,	20 },		/* PIO-Mode 1, [ns]	*/
> > -	{ 30,	101,	15 },		/* PIO-Mode 2, [ns]	*/
> > -	{ 30,	 80,	10 },		/* PIO-Mode 3, [ns]	*/
> > -	{ 25,	 70,	10 },		/* PIO-Mode 4, [ns]	*/
> > +const static pio_config_t pio_config_ns[IDE_MAX_PIO_MODE + 1] = {
> > +	/*  Setup  Length  Hold  */
> > +	{70, 165, 30},		/* PIO-Mode 0, [ns]     */
> > +	{50, 125, 20},		/* PIO-Mode 1, [ns]     */
> > +	{30, 101, 15},		/* PIO-Mode 2, [ns]     */
> > +	{30, 80, 10},		/* PIO-Mode 3, [ns]     */
> > +	{25, 70, 10},		/* PIO-Mode 4, [ns]     */
> >  };
>
> Instead of nice vertically aligned columns the new code is less
> readable.

OK, I'll change this back to the original alignment.

> > -static void  ide_ident (block_dev_desc_t *dev_desc);
> > -static uchar ide_wait  (int dev, ulong t);
> > +static void ide_ident(block_dev_desc_t * dev_desc);
>
> And I really hate the space after the '*' in lines like these,

I don't like then too. I'm wondering why indent didn't do this consistent.

> especially as it's done more or lessa randomly:
> > -static void	atapi_inquiry(block_dev_desc_t *dev_desc);
> > -ulong atapi_read (int device, lbaint_t blknr, ulong blkcnt, void
> > *buffer); +static void atapi_inquiry(block_dev_desc_t * dev_desc);
> > +ulong atapi_read(int device, lbaint_t blknr, ulong blkcnt, void
> > *buffer);
>
> We have "* dev_desc", but "*buffer" ? That's just bogus.
>
> > -	printf ("\nLoading from IDE device %d, partition %d: "
> > -		"Name: %.32s  Type: %.32s\n",
> > -		dev, part, info.name, info.type);
> > +	printf("\nLoading from IDE device %d, partition %d: "
> > +	       "Name: %.32s  Type: %.32s\n", dev, part, info.name, info.type);
>
> Also, reordering the lines here makes the code more difficult to read.
>
> > -	if (ide_dev_desc[dev].block_read (dev, info.start, 1, (ulong *)addr) !=
> > 1) { -		printf ("** Read error on %d:%d\n", dev, part);
> > -		show_boot_progress (-48);
> > +	if (ide_dev_desc[dev].block_read(dev, info.start, 1, (ulong *) addr) !=
> > 1) {
>
> Why is there a space after the cast?

No idea. I'll try to remove all those spaces.

<snip>

> > +U_BOOT_CMD(ide, 5, 1, do_ide,
> > +	   "IDE sub-system",
> > +	   "reset - reset IDE controller\n"
> > +	   "ide info  - show available IDE devices\n"
> > +	   "ide device [dev] - show or set current device\n"
> > +	   "ide part [dev] - print partition table of one or all IDE devices\n"
> > +	   "ide read  addr blk# cnt\n"
> > +	   "ide write addr blk# cnt - read/write `cnt'"
> > +	   " blocks starting at block `blk#'\n"
> > +	   "    to/from memory address `addr'\n");
> > +
> > +U_BOOT_CMD(diskboot, 3, 1, do_diskboot,
> > +	   "boot from IDE device", "loadAddr dev:part\n");
>
> And indentation should be done by TAB - I see no reason to add more
> space here.

Sure. I'll fix it.

> I agree that this file badly needs to be cleaned up, and I even agree
> to a patch like above - but it has to be done more intelligently. The
> resulting file should adhere to the Coding Style requirements, and be
> consistent in style.

OK, I'll try to fix all those issues and resubmit a new version.

Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================

  reply	other threads:[~2009-05-13 14:20 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-05-13  9:38 [U-Boot] [PATCH] common/cmd_ide.c: Coding style cleanup (Lindent) Stefan Roese
2009-05-13 11:32 ` Wolfgang Denk
2009-05-13 14:20   ` Stefan Roese [this message]
2009-05-13 14:23     ` Wolfgang Denk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200905131620.39726.sr@denx.de \
    --to=sr@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.