Hi all,

Here's an patch for generic gpmc-smc91x support.

The patch now uses better timings from the smc91x data sheet thanks to
Paul Walmsley, but the SDP board timings remain a bit of a mystery..

So the patch currently does not change the timings for 2430sdp and 3430sdp
as they seem to be connected in the muxed mode, and possibly through
the FPGA too. Uboot timings are used instead.

Does anybody here from TI know about calculating the timings for the 
SDP boards? And if the smc91x is wired through the FPGA instead of
level shifters?

The patch could be improved further later on with better timings
to account for the level shifter latencies as pointed out by Paul.

Regards,

Tony