From: Alexander Beregalov <a.beregalov@gmail.com>
To: Jeff Garzik <jeff@garzik.org>
Cc: linux-ide@vger.kernel.org
Subject: Re: [PATCH] sata_sx4: speed up ECC initialization
Date: Sat, 16 May 2009 17:29:12 +0400 [thread overview]
Message-ID: <20090516132912.GA23272@orion> (raw)
In-Reply-To: <4A0E5D5F.1080708@garzik.org>
On Sat, May 16, 2009 at 02:29:51AM -0400, Jeff Garzik wrote:
> Check out 2.6.30-rc6, sata_sx4 received several major bug fixes...
Thanks, but it still does not work.
bus: 'pci': add driver sata_sx4
bus: 'pci': driver_probe_device: matched device 0000:02:04.0 with driver sata_sx4
bus: 'pci': really_probe: probing driver sata_sx4 with device 0000:02:04.0
sata_sx4 0000:02:04.0: version 0.12
PCI: Enabling device: (0000:02:04.0), cmd 3
pdc20621_dimm_init: Time Period Register (0x40): 0xffffffff
pdc20621_dimm_init: Time Counter Register (0x44): 0xf71a3f65
pdc20621_dimm_init: Num counters 0x8e5c09a (149274778)
pdc20621_dimm_init: 10 * Internal clk = 0x1f1 (497)
pdc20621_dimm_init: 10 * Internal clk * 33 = 0x4011 (16401)
pdc20621_dimm_init: PLL F Param: 0x53 (83)
pdc20621_dimm_init: pci_status: 0x8a531824
pdc20621_dimm_init: Local DIMM Speed = 100
pdc20621_dimm_init: Local DIMM Size = 512MB
Local DIMM ECC Enabled
ff, 0,
ff, 0,
ff, 0,
pdc20621_dimm_init: Start ECC initialization
pdc20621_dimm_init: Finish ECC initialization
sata_sx4 0000:02:04.0: enabling bus mastering
pdc20621_interrupt: ENTER
pdc20621_interrupt: mask == 0x0
pdc20621_interrupt: QUICK EXIT 3
scsi2 : sata_sx4
device: 'host2': device_add
bus: 'scsi': add device host2
device: 'host2': device_add
scsi3 : sata_sx4
device: 'host3': device_add
bus: 'scsi': add device host3
device: 'host3': device_add
scsi4 : sata_sx4
device: 'host4': device_add
bus: 'scsi': add device host4
device: 'host4': device_add
scsi5 : sata_sx4
device: 'host5': device_add
bus: 'scsi': add device host5
device: 'host5': device_add
ata3: PATA max UDMA/133 mmio m1048576@0x1ff00300000 dimm m32768@0x1ff00400000 port 0x1ff00300200 irq 16
ata4: PATA max UDMA/133 mmio m1048576@0x1ff00300000 dimm m32768@0x1ff00400000 port 0x1ff00300280 irq 16
ata5: PATA max UDMA/133 mmio m1048576@0x1ff00300000 dimm m32768@0x1ff00400000 port 0x1ff00300300 irq 16
ata6: PATA max UDMA/133 mmio m1048576@0x1ff00300000 dimm m32768@0x1ff00400000 port 0x1ff00300380 irq 16
driver: '0000:02:04.0': driver_bound: bound to device 'sata_sx4'
bus: 'pci': really_probe: bound device 0000:02:04.0 to driver sata_sx4
ata3.00: ATA-5: ST320414A, 3.28, max UDMA/100
ata3.00: 39851760 sectors, multi 0: LBA
pdc20621_nodata_prep: ata3: ENTER
pdc20621_ata_pkt: ENTER, dimm_sg == 0x200180, 2097536
pdc20621_nodata_prep: ata pkt buf ofs 282, mmio copied
ata3.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA ST320414A 3.28 PQ: 0 ANSI: 5
device: 'target2:0:0': device_add
bus: 'scsi': add device target2:0:0
device: '2:0:0:0': device_add
bus: 'scsi': add device 2:0:0:0
bus: 'scsi': driver_probe_device: matched device 2:0:0:0 with driver sd
bus: 'scsi': really_probe: probing driver sd with device 2:0:0:0
driver: '2:0:0:0': driver_bound: bound to device 'sd'
bus: 'scsi': really_probe: bound device 2:0:0:0 to driver sd
device: '2:0:0:0': device_add
device: 'sg1': device_add
sd 2:0:0:0: Attached scsi generic sg1 type 0
device: '2:0:0:0': device_add
sd 2:0:0:0: [sdb] 39851760 512-byte hardware sectors: (20.4 GB/19.0 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
device: 'sdb': device_add
sdb:<3>pdc20621_dma_prep: ata3: ENTER
pdc20621_host_sg: HOST PSG @ 200080 == (0x2100, 0x200080)
pdc20621_host_pkt: ENTER, dimm_sg == 0x200080, 2097280
pdc20621_host_pkt: host_sg == 0x201800, 2103296
pdc20621_host_pkt: HOST PKT @ 200000 == (0x40005ff 0x182000 0x80002000 0x0)
pdc20621_ata_sg: ATA sg addr 0x210000, 2162688
pdc20621_ata_sg: ATA PSG @ 200180 == (0x2100, 0x200080)
pdc20621_ata_pkt: ENTER, dimm_sg == 0x200180, 2097536
pdc20621_dma_prep: ata pkt buf ofs 282, prd size 8, mmio copied
pdc20621_packet_start: ata3: ENTER
pdc20621_packet_start: submitted ofs 0x200100 (2097408), seq 1
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata3.00: cmd c8/00:10:00:00:00/00:00:00:00:00/e0 tag 0 dma 8192 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: soft resetting link
pdc20621_nodata_prep: ata3: ENTER
pdc20621_ata_pkt: ENTER, dimm_sg == 0x200180, 2097536
pdc20621_nodata_prep: ata pkt buf ofs 282, mmio copied
ata3.00: configured for UDMA/100
ata3: EH complete
pdc20621_dma_prep: ata3: ENTER
pdc20621_host_sg: HOST PSG @ 200080 == (0x2100, 0x200080)
pdc20621_host_pkt: ENTER, dimm_sg == 0x200080, 2097280
pdc20621_host_pkt: host_sg == 0x201800, 2103296
pdc20621_host_pkt: HOST PKT @ 200000 == (0x40005ff 0x182000 0x80002000 0x0)
pdc20621_ata_sg: ATA sg addr 0x210000, 2162688
pdc20621_ata_sg: ATA PSG @ 200180 == (0x2100, 0x200080)
pdc20621_ata_pkt: ENTER, dimm_sg == 0x200180, 2097536
pdc20621_dma_prep: ata pkt buf ofs 282, prd size 8, mmio copied
pdc20621_packet_start: ata3: ENTER
pdc20621_packet_start: submitted ofs 0x200100 (2097408), seq 1
ata3.00: limiting speed to UDMA/66:PIO4
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata3.00: cmd c8/00:10:00:00:00/00:00:00:00:00/e0 tag 0 dma 8192 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: soft resetting link
next prev parent reply other threads:[~2009-05-16 13:29 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-14 2:26 [PATCH] sata_sx4: speed up ECC initialization Alexander Beregalov
2009-04-14 11:57 ` Jeff Garzik
2009-04-14 20:00 ` Alexander Beregalov
2009-04-14 20:21 ` Jeff Garzik
2009-04-14 20:51 ` Alexander Beregalov
2009-04-15 8:02 ` Mikael Pettersson
2009-05-16 6:29 ` Jeff Garzik
2009-05-16 13:29 ` Alexander Beregalov [this message]
2009-05-16 19:11 ` Jeff Garzik
2009-05-16 19:17 ` Alexander Beregalov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090516132912.GA23272@orion \
--to=a.beregalov@gmail.com \
--cc=jeff@garzik.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.