From: Jens Axboe <jens.axboe@oracle.com>
To: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com>
Cc: linux-kernel@vger.kernel.org, linux-fsdevel@vger.kernel.org,
chris.mason@oracle.com, david@fromorbit.com, hch@infradead.org,
akpm@linux-foundation.org, jack@suse.cz
Subject: Re: [PATCH 0/11] Per-bdi writeback flusher threads #4
Date: Tue, 19 May 2009 08:20:50 +0200 [thread overview]
Message-ID: <20090519062049.GP4140@kernel.dk> (raw)
In-Reply-To: <1242713463.2560.5.camel@ymzhang>
[-- Attachment #1: Type: text/plain, Size: 3386 bytes --]
On Tue, May 19 2009, Zhang, Yanmin wrote:
> On Mon, 2009-05-18 at 14:19 +0200, Jens Axboe wrote:
> > Hi,
> >
> > This is the fourth version of this patchset. Chances since v3:
> >
> > - Dropped a prep patch, it has been included in mainline since.
> >
> > - Add a work-to-do list to the bdi. This is struct bdi_work. Each
> > wb thread will notice and execute work on bdi->work_list. The arguments
> > are which sb (or NULL for all) to flush and how many pages to flush.
> >
> > - Fix a bug where not all bdi's would end up on the bdi_list, so potentially
> > some data would not be flushed.
> >
> > - Make wb_kupdated() pass on wbc->older_than_this so we maintain the same
> > behaviour for kupdated flushes.
> >
> > - Have the wb thread flush first before sleeping, to avoid losing the
> > first flush on lazy register.
> >
> > - Rebase to newer kernels.
> Jens,
>
> Applied V4 to 2.6.30-rc6 and got some confliction reports.
> ----------patch-2----------
> patching file fs/buffer.c
> patching file fs/fs-writeback.c
> patching file fs/ntfs/super.c
> patching file fs/sync.c
> patching file include/linux/backing-dev.h
> patching file include/linux/fs.h
> patching file include/linux/writeback.h
> patching file mm/backing-dev.c
> patching file mm/page-writeback.c
> Hunk #5 FAILED at 666.
> 1 out of 6 hunks FAILED -- saving rejects to file mm/page-writeback.c.rej
> patching file mm/vmscan.c
> ----------patch-3----------
> patching file fs/fs-writeback.c
> patching file include/linux/writeback.h
> patching file mm/Makefile
> patching file mm/pdflush.c
> ----------patch-4----------
> patching file fs/fs-writeback.c
> patching file include/linux/backing-dev.h
> patching file mm/backing-dev.c
> ----------patch-5----------
> patching file fs/fs-writeback.c
> patching file include/linux/backing-dev.h
> patching file include/linux/fs.h
> patching file mm/backing-dev.c
> patching file mm/page-writeback.c
> Hunk #1 succeeded at 708 with fuzz 2 (offset 41 lines).
> Hunk #2 FAILED at 716.
> 1 out of 2 hunks FAILED -- saving rejects to file mm/page-writeback.c.rej
It's not against -rc6, it's against current -git. And current -git had a
one-liner fixup to the centisec calculation, so it'll fail. If you apply
the below patch to -rc6, then the series should apply cleanly on top of
that.
> Then, I manually fixed the conflictions, but compilation reports errors.
> Your patches seem not clean.
>
> CC fs/exec.o
> mm/page-writeback.c: In function 'background_writeout':
> mm/page-writeback.c:695: error: 'MAX_WRITEBACK_PAGES' undeclared (first use in this function)
> mm/page-writeback.c:695: error: (Each undeclared identifier is reported only once
> mm/page-writeback.c:695: error: for each function it appears in.)
> mm/page-writeback.c: In function 'wb_kupdate':
> mm/page-writeback.c:769: error: 'MAX_WRITEBACK_PAGES' undeclared (first use in this function)
> mm/page-writeback.c: In function 'wb_timer_fn':
> mm/page-writeback.c:802: error: implicit declaration of function 'pdflush_operation'
> make[1]: *** [mm/page-writeback.o] Error 1
> make[1]: *** Waiting for unfinished jobs....
> CC fs/pipe.o
You still have remnants of pdflush, so there's definite something wrong
with your manual patching :-)
I'm attaching two patches - apply #1 to -rc6, and then #2 is a roll-up
of the patch series that you can apply next.
--
Jens Axboe
[-- Attachment #2: writeback-fix.patch --]
[-- Type: text/x-diff, Size: 2003 bytes --]
commit 22ef37eed673587ac984965dc88ba94c68873291
Author: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Date: Sat May 16 22:56:28 2009 -0700
page-writeback: fix the calculation of the oldest_jif in wb_kupdate()
wb_kupdate() function has a bug on linux-2.6.30-rc5. This bug causes
generic_sync_sb_inodes() to start to write inodes back much earlier than
our expectations because it miscalculates oldest_jif in wb_kupdate().
This bug was introduced in 704503d836042d4a4c7685b7036e7de0418fbc0f
('mm: fix proc_dointvec_userhz_jiffies "breakage"').
Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 30351f0..bb553c3 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -94,12 +94,12 @@ unsigned long vm_dirty_bytes;
/*
* The interval between `kupdate'-style writebacks
*/
-unsigned int dirty_writeback_interval = 5 * 100; /* sentiseconds */
+unsigned int dirty_writeback_interval = 5 * 100; /* centiseconds */
/*
* The longest time for which data is allowed to remain dirty
*/
-unsigned int dirty_expire_interval = 30 * 100; /* sentiseconds */
+unsigned int dirty_expire_interval = 30 * 100; /* centiseconds */
/*
* Flag that makes the machine dump writes/reads and block dirtyings.
@@ -770,7 +770,7 @@ static void wb_kupdate(unsigned long arg)
sync_supers();
- oldest_jif = jiffies - msecs_to_jiffies(dirty_expire_interval);
+ oldest_jif = jiffies - msecs_to_jiffies(dirty_expire_interval * 10);
start_jif = jiffies;
next_jif = start_jif + msecs_to_jiffies(dirty_writeback_interval * 10);
nr_to_write = global_page_state(NR_FILE_DIRTY) +
[-- Attachment #3: writeback-20090519 --]
[-- Type: text/plain, Size: 74972 bytes --]
diff --git a/block/blk-core.c b/block/blk-core.c
index c89883b..d3f18b5 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -517,6 +517,7 @@ struct request_queue *blk_alloc_queue_node(gfp_t gfp_mask, int node_id)
q->backing_dev_info.unplug_io_fn = blk_backing_dev_unplug;
q->backing_dev_info.unplug_io_data = q;
+ q->backing_dev_info.name = "block";
err = bdi_init(&q->backing_dev_info);
if (err) {
kmem_cache_free(blk_requestq_cachep, q);
diff --git a/drivers/block/aoe/aoeblk.c b/drivers/block/aoe/aoeblk.c
index 2307a27..0efb8fc 100644
--- a/drivers/block/aoe/aoeblk.c
+++ b/drivers/block/aoe/aoeblk.c
@@ -265,6 +265,7 @@ aoeblk_gdalloc(void *vp)
}
blk_queue_make_request(&d->blkq, aoeblk_make_request);
+ d->blkq.backing_dev_info.name = "aoe";
if (bdi_init(&d->blkq.backing_dev_info))
goto err_mempool;
spin_lock_irqsave(&d->lock, flags);
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index 8f05c38..3b38093 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -820,6 +820,7 @@ static const struct file_operations zero_fops = {
* - permits private mappings, "copies" are taken of the source of zeros
*/
static struct backing_dev_info zero_bdi = {
+ .name = "char/mem",
.capabilities = BDI_CAP_MAP_COPY,
};
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 4b0ea0b..eff2a82 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -1345,12 +1345,25 @@ static void btrfs_unplug_io_fn(struct backing_dev_info *bdi, struct page *page)
free_extent_map(em);
}
+/*
+ * If this fails, caller must call bdi_destroy() to get rid of the
+ * bdi again.
+ */
static int setup_bdi(struct btrfs_fs_info *info, struct backing_dev_info *bdi)
{
- bdi_init(bdi);
+ int err;
+
+ bdi->name = "btrfs";
+ bdi->capabilities = BDI_CAP_MAP_COPY;
+ err = bdi_init(bdi);
+ if (err)
+ return err;
+
+ err = bdi_register(bdi, NULL, "btrfs");
+ if (err)
+ return err;
+
bdi->ra_pages = default_backing_dev_info.ra_pages;
- bdi->state = 0;
- bdi->capabilities = default_backing_dev_info.capabilities;
bdi->unplug_io_fn = btrfs_unplug_io_fn;
bdi->unplug_io_data = info;
bdi->congested_fn = btrfs_congested_fn;
@@ -1574,7 +1587,8 @@ struct btrfs_root *open_ctree(struct super_block *sb,
fs_info->sb = sb;
fs_info->max_extent = (u64)-1;
fs_info->max_inline = 8192 * 1024;
- setup_bdi(fs_info, &fs_info->bdi);
+ if (setup_bdi(fs_info, &fs_info->bdi))
+ goto fail_bdi;
fs_info->btree_inode = new_inode(sb);
fs_info->btree_inode->i_ino = 1;
fs_info->btree_inode->i_nlink = 1;
@@ -1931,8 +1945,8 @@ fail_iput:
btrfs_close_devices(fs_info->fs_devices);
btrfs_mapping_tree_free(&fs_info->mapping_tree);
+fail_bdi:
bdi_destroy(&fs_info->bdi);
-
fail:
kfree(extent_root);
kfree(tree_root);
diff --git a/fs/buffer.c b/fs/buffer.c
index aed2977..14f0802 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -281,7 +281,7 @@ static void free_more_memory(void)
struct zone *zone;
int nid;
- wakeup_pdflush(1024);
+ wakeup_flusher_threads(1024);
yield();
for_each_online_node(nid) {
diff --git a/fs/char_dev.c b/fs/char_dev.c
index 38f7122..350ef9c 100644
--- a/fs/char_dev.c
+++ b/fs/char_dev.c
@@ -32,6 +32,7 @@
* - no readahead or I/O queue unplugging required
*/
struct backing_dev_info directly_mappable_cdev_bdi = {
+ .name = "char",
.capabilities = (
#ifdef CONFIG_MMU
/* permit private copies of the data to be taken */
diff --git a/fs/configfs/inode.c b/fs/configfs/inode.c
index 5d349d3..9a266cd 100644
--- a/fs/configfs/inode.c
+++ b/fs/configfs/inode.c
@@ -46,6 +46,7 @@ static const struct address_space_operations configfs_aops = {
};
static struct backing_dev_info configfs_backing_dev_info = {
+ .name = "configfs",
.ra_pages = 0, /* No readahead */
.capabilities = BDI_CAP_NO_ACCT_AND_WRITEBACK,
};
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index 91013ff..a287c09 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -19,49 +19,443 @@
#include <linux/sched.h>
#include <linux/fs.h>
#include <linux/mm.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
#include <linux/writeback.h>
#include <linux/blkdev.h>
#include <linux/backing-dev.h>
#include <linux/buffer_head.h>
#include "internal.h"
+#define inode_to_bdi(inode) ((inode)->i_mapping->backing_dev_info)
-/**
- * writeback_acquire - attempt to get exclusive writeback access to a device
- * @bdi: the device's backing_dev_info structure
- *
- * It is a waste of resources to have more than one pdflush thread blocked on
- * a single request queue. Exclusion at the request_queue level is obtained
- * via a flag in the request_queue's backing_dev_info.state.
- *
- * Non-request_queue-backed address_spaces will share default_backing_dev_info,
- * unless they implement their own. Which is somewhat inefficient, as this
- * may prevent concurrent writeback against multiple devices.
+/*
+ * We don't actually have pdflush, but this one is exported though /proc...
*/
-static int writeback_acquire(struct backing_dev_info *bdi)
+int nr_pdflush_threads;
+
+static void generic_sync_wb_inodes(struct bdi_writeback *wb,
+ struct super_block *sb,
+ struct writeback_control *wbc);
+
+/*
+ * Work items for the bdi_writeback threads
+ */
+struct bdi_work {
+ struct list_head list;
+ struct rcu_head rcu_head;
+
+ unsigned long seen;
+ atomic_t pending;
+
+ unsigned long sb_data;
+ unsigned long nr_pages;
+
+ unsigned long state;
+};
+
+static struct super_block *bdi_work_sb(struct bdi_work *work)
+{
+ return (struct super_block *) (work->sb_data & ~1UL);
+}
+
+static inline bool bdi_work_on_stack(struct bdi_work *work)
+{
+ return work->sb_data & 1UL;
+}
+
+static inline void bdi_work_init(struct bdi_work *work, struct super_block *sb,
+ unsigned long nr_pages)
{
- return !test_and_set_bit(BDI_pdflush, &bdi->state);
+ INIT_RCU_HEAD(&work->rcu_head);
+ work->sb_data = (unsigned long) sb;
+ work->nr_pages = nr_pages;
+ work->state = 0;
+}
+
+static inline void bdi_work_init_on_stack(struct bdi_work *work,
+ struct super_block *sb,
+ unsigned long nr_pages)
+{
+ bdi_work_init(work, sb, nr_pages);
+ set_bit(0, &work->state);
+ work->sb_data |= 1UL;
}
/**
* writeback_in_progress - determine whether there is writeback in progress
* @bdi: the device's backing_dev_info structure.
*
- * Determine whether there is writeback in progress against a backing device.
+ * Determine whether there is writeback waiting to be handled against a
+ * backing device.
*/
int writeback_in_progress(struct backing_dev_info *bdi)
{
- return test_bit(BDI_pdflush, &bdi->state);
+ return !list_empty(&bdi->work_list);
}
-/**
- * writeback_release - relinquish exclusive writeback access against a device.
- * @bdi: the device's backing_dev_info structure
+static void bdi_work_free(struct rcu_head *head)
+{
+ struct bdi_work *work = container_of(head, struct bdi_work, rcu_head);
+
+ if (!bdi_work_on_stack(work))
+ kfree(work);
+ else {
+ clear_bit(0, &work->state);
+ wake_up_bit(&work->state, 0);
+ }
+}
+
+static void wb_clear_pending(struct bdi_writeback *wb, struct bdi_work *work)
+{
+ /*
+ * The caller has retrieved the work arguments from this work,
+ * drop our reference. If this is the last ref, delete and free it
+ */
+ if (atomic_dec_and_test(&work->pending)) {
+ struct backing_dev_info *bdi = wb->bdi;
+
+ spin_lock(&bdi->wb_lock);
+ list_del_rcu(&work->list);
+ spin_unlock(&bdi->wb_lock);
+
+ call_rcu(&work->rcu_head, bdi_work_free);
+ }
+}
+
+static void wb_start_writeback(struct bdi_writeback *wb, struct bdi_work *work)
+{
+ /*
+ * If we failed allocating the bdi work item, wake up the wb thread
+ * always. As a safety precaution, it'll flush out everything
+ */
+ if (!wb_has_dirty_io(wb) && work)
+ wb_clear_pending(wb, work);
+ else
+ wake_up(&wb->wait);
+}
+
+static int bdi_queue_writeback(struct backing_dev_info *bdi,
+ struct bdi_work *work)
+{
+ if (work) {
+ work->seen = bdi->wb_mask;
+ atomic_set(&work->pending, bdi->wb_cnt);
+
+ /*
+ * Make sure stores are seen before it appears on the list
+ */
+ smp_mb();
+
+ spin_lock(&bdi->wb_lock);
+ list_add_tail_rcu(&work->list, &bdi->work_list);
+ spin_unlock(&bdi->wb_lock);
+ }
+
+ /*
+ * This only happens the first time someone kicks this bdi, so put
+ * it out-of-line.
+ */
+ if (unlikely(list_empty_careful(&bdi->wb_list))) {
+ bdi_add_default_flusher_task(bdi);
+ return 1;
+ }
+
+ if (!bdi_wblist_needs_lock(bdi))
+ wb_start_writeback(&bdi->wb, work);
+ else {
+ struct bdi_writeback *wb;
+ int idx;
+
+ idx = srcu_read_lock(&bdi->srcu);
+
+ list_for_each_entry_rcu(wb, &bdi->wb_list, list)
+ wb_start_writeback(wb, work);
+
+ srcu_read_unlock(&bdi->srcu, idx);
+ }
+
+ return 0;
+}
+
+/*
+ * Used for on-stack allocated work items. The caller needs to wait until
+ * the wb threads have acked the work before it's safe to continue.
+ */
+static void bdi_wait_on_work_start(struct bdi_work *work)
+{
+ wait_on_bit(&work->state, 0, bdi_sched_wait, TASK_UNINTERRUPTIBLE);
+}
+
+int bdi_start_writeback(struct backing_dev_info *bdi, struct super_block *sb,
+ long nr_pages)
+{
+ struct bdi_work work;
+ int ret;
+
+ bdi_work_init_on_stack(&work, sb, nr_pages);
+
+ ret = bdi_queue_writeback(bdi, &work);
+
+ bdi_wait_on_work_start(&work);
+
+ return ret;
+}
+
+/*
+ * The maximum number of pages to writeout in a single bdi flush/kupdate
+ * operation. We do this so we don't hold I_SYNC against an inode for
+ * enormous amounts of time, which would block a userspace task which has
+ * been forced to throttle against that inode. Also, the code reevaluates
+ * the dirty each time it has written this many pages.
+ */
+#define MAX_WRITEBACK_PAGES 1024
+
+/*
+ * Periodic writeback of "old" data.
+ *
+ * Define "old": the first time one of an inode's pages is dirtied, we mark the
+ * dirtying-time in the inode's address_space. So this periodic writeback code
+ * just walks the superblock inode list, writing back any inodes which are
+ * older than a specific point in time.
+ *
+ * Try to run once per dirty_writeback_interval. But if a writeback event
+ * takes longer than a dirty_writeback_interval interval, then leave a
+ * one-second gap.
+ *
+ * older_than_this takes precedence over nr_to_write. So we'll only write back
+ * all dirty pages if they are all attached to "old" mappings.
+ */
+static long wb_kupdated(struct bdi_writeback *wb)
+{
+ unsigned long oldest_jif;
+ long nr_to_write, wrote = 0;
+ struct writeback_control wbc = {
+ .bdi = wb->bdi,
+ .sync_mode = WB_SYNC_NONE,
+ .older_than_this = &oldest_jif,
+ .nr_to_write = 0,
+ .for_kupdate = 1,
+ .range_cyclic = 1,
+ };
+
+ sync_supers();
+
+ oldest_jif = jiffies - msecs_to_jiffies(dirty_expire_interval * 10);
+
+ nr_to_write = global_page_state(NR_FILE_DIRTY) +
+ global_page_state(NR_UNSTABLE_NFS) +
+ (inodes_stat.nr_inodes - inodes_stat.nr_unused);
+
+ while (nr_to_write > 0) {
+ wbc.more_io = 0;
+ wbc.encountered_congestion = 0;
+ wbc.nr_to_write = MAX_WRITEBACK_PAGES;
+ generic_sync_wb_inodes(wb, NULL, &wbc);
+ wrote += MAX_WRITEBACK_PAGES - wbc.nr_to_write;
+ if (wbc.nr_to_write > 0)
+ break; /* All the old data is written */
+ nr_to_write -= MAX_WRITEBACK_PAGES;
+ }
+
+ return wrote;
+}
+
+static long __wb_writeback(struct bdi_writeback *wb, long nr_pages,
+ struct super_block *sb)
+{
+ struct writeback_control wbc = {
+ .bdi = wb->bdi,
+ .sync_mode = WB_SYNC_NONE,
+ .older_than_this = NULL,
+ .range_cyclic = 1,
+ };
+ long wrote = 0;
+
+ for (;;) {
+ unsigned long background_thresh, dirty_thresh;
+
+ get_dirty_limits(&background_thresh, &dirty_thresh, NULL, NULL);
+ if ((global_page_state(NR_FILE_DIRTY) +
+ global_page_state(NR_UNSTABLE_NFS) < background_thresh) &&
+ nr_pages <= 0)
+ break;
+
+ wbc.more_io = 0;
+ wbc.encountered_congestion = 0;
+ wbc.nr_to_write = MAX_WRITEBACK_PAGES;
+ wbc.pages_skipped = 0;
+ generic_sync_wb_inodes(wb, sb, &wbc);
+ nr_pages -= MAX_WRITEBACK_PAGES - wbc.nr_to_write;
+ wrote += MAX_WRITEBACK_PAGES - wbc.nr_to_write;
+ /*
+ * If we ran out of stuff to write, bail unless more_io got set
+ */
+ if (wbc.nr_to_write > 0 || wbc.pages_skipped > 0) {
+ if (wbc.more_io)
+ continue;
+ break;
+ }
+ }
+
+ return wrote;
+}
+
+/*
+ * Return the next bdi_work struct that hasn't been processed by this
+ * wb thread yet
+ */
+static struct bdi_work *get_next_work_item(struct backing_dev_info *bdi,
+ struct bdi_writeback *wb)
+{
+ struct bdi_work *work, *ret = NULL;
+
+ rcu_read_lock();
+
+ list_for_each_entry_rcu(work, &bdi->work_list, list) {
+ if (!test_and_clear_bit(wb->nr, &work->seen))
+ continue;
+
+ ret = work;
+ break;
+ }
+
+ rcu_read_unlock();
+ return ret;
+}
+
+static long wb_writeback(struct bdi_writeback *wb)
+{
+ struct backing_dev_info *bdi = wb->bdi;
+ struct bdi_work *work;
+ long wrote = 0;
+
+ while ((work = get_next_work_item(bdi, wb)) != NULL) {
+ struct super_block *sb = bdi_work_sb(work);
+ long nr_pages = work->nr_pages;
+
+ wb_clear_pending(wb, work);
+ wrote += __wb_writeback(wb, nr_pages, sb);
+ }
+
+ return wrote;
+}
+
+/*
+ * This will be inlined in bdi_writeback_task() once we get rid of any
+ * dirty inodes on the default_backing_dev_info
+ */
+long wb_do_writeback(struct bdi_writeback *wb)
+{
+ long wrote;
+
+ /*
+ * We get here in two cases:
+ *
+ * schedule_timeout() returned because the dirty writeback
+ * interval has elapsed. If that happens, the work item list
+ * will be empty and we will proceed to do kupdated style writeout.
+ *
+ * Someone called bdi_start_writeback(), which put one/more work
+ * items on the work_list. Process those.
+ */
+ if (list_empty(&wb->bdi->work_list))
+ wrote = wb_kupdated(wb);
+ else
+ wrote = wb_writeback(wb);
+
+ return wrote;
+}
+
+/*
+ * Handle writeback of dirty data for the device backed by this bdi. Also
+ * wakes up periodically and does kupdated style flushing.
*/
-static void writeback_release(struct backing_dev_info *bdi)
+int bdi_writeback_task(struct bdi_writeback *wb)
{
- BUG_ON(!writeback_in_progress(bdi));
- clear_bit(BDI_pdflush, &bdi->state);
+ unsigned long last_active = jiffies;
+ unsigned long wait_jiffies = -1UL;
+ long pages_written;
+ DEFINE_WAIT(wait);
+
+ while (!kthread_should_stop()) {
+
+ pages_written = wb_do_writeback(wb);
+
+ if (pages_written)
+ last_active = jiffies;
+ else if (wait_jiffies != -1UL) {
+ unsigned long max_idle;
+
+ /*
+ * Longest period of inactivity that we tolerate. If we
+ * see dirty data again later, the task will get
+ * recreated automatically.
+ */
+ max_idle = max(5UL * 60 * HZ, wait_jiffies);
+ if (time_after(jiffies, max_idle + last_active) &&
+ wb_is_default_task(wb))
+ break;
+ }
+
+ prepare_to_wait(&wb->wait, &wait, TASK_INTERRUPTIBLE);
+ wait_jiffies = msecs_to_jiffies(dirty_writeback_interval * 10);
+ schedule_timeout(wait_jiffies);
+ try_to_freeze();
+ }
+
+ finish_wait(&wb->wait, &wait);
+ return 0;
+}
+
+void bdi_writeback_all(struct super_block *sb, long nr_pages)
+{
+ struct list_head *entry = &bdi_list;
+
+ rcu_read_lock();
+
+ list_for_each_continue_rcu(entry, &bdi_list) {
+ struct backing_dev_info *bdi;
+ struct list_head *next;
+ struct bdi_work *work;
+
+ bdi = list_entry(entry, struct backing_dev_info, bdi_list);
+ if (!bdi_has_dirty_io(bdi))
+ continue;
+
+ /*
+ * If this allocation fails, we just wakeup the thread and
+ * let it do kupdate writeback
+ */
+ work = kmalloc(sizeof(*work), GFP_ATOMIC);
+ if (work)
+ bdi_work_init(work, sb, nr_pages);
+
+ /*
+ * Prepare to start from previous entry if this one gets moved
+ * to the bdi_pending list.
+ */
+ next = entry->prev;
+ if (bdi_queue_writeback(bdi, work))
+ entry = next;
+ }
+
+ rcu_read_unlock();
+}
+
+/*
+ * If the filesystem didn't provide a way to map an inode to a dedicated
+ * flusher thread, it doesn't support more than 1 thread. So we know it's
+ * the default thread, return that.
+ */
+static inline struct bdi_writeback *inode_get_wb(struct inode *inode)
+{
+ const struct super_operations *sop = inode->i_sb->s_op;
+
+ if (!sop->inode_get_wb)
+ return &inode_to_bdi(inode)->wb;
+
+ return sop->inode_get_wb(inode);
}
/**
@@ -158,12 +552,21 @@ void __mark_inode_dirty(struct inode *inode, int flags)
goto out;
/*
- * If the inode was already on s_dirty/s_io/s_more_io, don't
- * reposition it (that would break s_dirty time-ordering).
+ * If the inode was already on b_dirty/b_io/b_more_io, don't
+ * reposition it (that would break b_dirty time-ordering).
*/
if (!was_dirty) {
+ struct bdi_writeback *wb = inode_get_wb(inode);
+ struct backing_dev_info *bdi = wb->bdi;
+
+ if (bdi_cap_writeback_dirty(bdi) &&
+ !test_bit(BDI_registered, &bdi->state)) {
+ WARN_ON(1);
+ printk("bdi-%s not registered\n", bdi->name);
+ }
+
inode->dirtied_when = jiffies;
- list_move(&inode->i_list, &sb->s_dirty);
+ list_move(&inode->i_list, &wb->b_dirty);
}
}
out:
@@ -184,31 +587,32 @@ static int write_inode(struct inode *inode, int sync)
* furthest end of its superblock's dirty-inode list.
*
* Before stamping the inode's ->dirtied_when, we check to see whether it is
- * already the most-recently-dirtied inode on the s_dirty list. If that is
+ * already the most-recently-dirtied inode on the b_dirty list. If that is
* the case then the inode must have been redirtied while it was being written
* out and we don't reset its dirtied_when.
*/
static void redirty_tail(struct inode *inode)
{
- struct super_block *sb = inode->i_sb;
+ struct bdi_writeback *wb = inode_get_wb(inode);
- if (!list_empty(&sb->s_dirty)) {
- struct inode *tail_inode;
+ if (!list_empty(&wb->b_dirty)) {
+ struct inode *tail;
- tail_inode = list_entry(sb->s_dirty.next, struct inode, i_list);
- if (time_before(inode->dirtied_when,
- tail_inode->dirtied_when))
+ tail = list_entry(wb->b_dirty.next, struct inode, i_list);
+ if (time_before(inode->dirtied_when, tail->dirtied_when))
inode->dirtied_when = jiffies;
}
- list_move(&inode->i_list, &sb->s_dirty);
+ list_move(&inode->i_list, &wb->b_dirty);
}
/*
- * requeue inode for re-scanning after sb->s_io list is exhausted.
+ * requeue inode for re-scanning after bdi->b_io list is exhausted.
*/
static void requeue_io(struct inode *inode)
{
- list_move(&inode->i_list, &inode->i_sb->s_more_io);
+ struct bdi_writeback *wb = inode_get_wb(inode);
+
+ list_move(&inode->i_list, &wb->b_more_io);
}
static void inode_sync_complete(struct inode *inode)
@@ -255,21 +659,12 @@ static void move_expired_inodes(struct list_head *delaying_queue,
/*
* Queue all expired dirty inodes for io, eldest first.
*/
-static void queue_io(struct super_block *sb,
- unsigned long *older_than_this)
+static void queue_io(struct bdi_writeback *wb, unsigned long *older_than_this)
{
- list_splice_init(&sb->s_more_io, sb->s_io.prev);
- move_expired_inodes(&sb->s_dirty, &sb->s_io, older_than_this);
+ list_splice_init(&wb->b_more_io, wb->b_io.prev);
+ move_expired_inodes(&wb->b_dirty, &wb->b_io, older_than_this);
}
-int sb_has_dirty_inodes(struct super_block *sb)
-{
- return !list_empty(&sb->s_dirty) ||
- !list_empty(&sb->s_io) ||
- !list_empty(&sb->s_more_io);
-}
-EXPORT_SYMBOL(sb_has_dirty_inodes);
-
/*
* Write a single inode's dirty pages and inode data out to disk.
* If `wait' is set, wait on the writeout.
@@ -322,11 +717,11 @@ __sync_single_inode(struct inode *inode, struct writeback_control *wbc)
/*
* We didn't write back all the pages. nfs_writepages()
* sometimes bales out without doing anything. Redirty
- * the inode; Move it from s_io onto s_more_io/s_dirty.
+ * the inode; Move it from b_io onto b_more_io/b_dirty.
*/
/*
* akpm: if the caller was the kupdate function we put
- * this inode at the head of s_dirty so it gets first
+ * this inode at the head of b_dirty so it gets first
* consideration. Otherwise, move it to the tail, for
* the reasons described there. I'm not really sure
* how much sense this makes. Presumably I had a good
@@ -336,7 +731,7 @@ __sync_single_inode(struct inode *inode, struct writeback_control *wbc)
if (wbc->for_kupdate) {
/*
* For the kupdate function we move the inode
- * to s_more_io so it will get more writeout as
+ * to b_more_io so it will get more writeout as
* soon as the queue becomes uncongested.
*/
inode->i_state |= I_DIRTY_PAGES;
@@ -402,10 +797,10 @@ __writeback_single_inode(struct inode *inode, struct writeback_control *wbc)
if ((wbc->sync_mode != WB_SYNC_ALL) && (inode->i_state & I_SYNC)) {
/*
* We're skipping this inode because it's locked, and we're not
- * doing writeback-for-data-integrity. Move it to s_more_io so
- * that writeback can proceed with the other inodes on s_io.
+ * doing writeback-for-data-integrity. Move it to b_more_io so
+ * that writeback can proceed with the other inodes on b_io.
* We'll have another go at writing back this inode when we
- * completed a full scan of s_io.
+ * completed a full scan of b_io.
*/
requeue_io(inode);
return 0;
@@ -428,51 +823,34 @@ __writeback_single_inode(struct inode *inode, struct writeback_control *wbc)
return __sync_single_inode(inode, wbc);
}
-/*
- * Write out a superblock's list of dirty inodes. A wait will be performed
- * upon no inodes, all inodes or the final one, depending upon sync_mode.
- *
- * If older_than_this is non-NULL, then only write out inodes which
- * had their first dirtying at a time earlier than *older_than_this.
- *
- * If we're a pdflush thread, then implement pdflush collision avoidance
- * against the entire list.
- *
- * If `bdi' is non-zero then we're being asked to writeback a specific queue.
- * This function assumes that the blockdev superblock's inodes are backed by
- * a variety of queues, so all inodes are searched. For other superblocks,
- * assume that all inodes are backed by the same queue.
- *
- * FIXME: this linear search could get expensive with many fileystems. But
- * how to fix? We need to go from an address_space to all inodes which share
- * a queue with that address_space. (Easy: have a global "dirty superblocks"
- * list).
- *
- * The inodes to be written are parked on sb->s_io. They are moved back onto
- * sb->s_dirty as they are selected for writing. This way, none can be missed
- * on the writer throttling path, and we get decent balancing between many
- * throttled threads: we don't want them all piling up on inode_sync_wait.
- */
-void generic_sync_sb_inodes(struct super_block *sb,
- struct writeback_control *wbc)
+static void generic_sync_wb_inodes(struct bdi_writeback *wb,
+ struct super_block *sb,
+ struct writeback_control *wbc)
{
+ const int is_blkdev_sb = sb_is_blkdev_sb(sb);
const unsigned long start = jiffies; /* livelock avoidance */
- int sync = wbc->sync_mode == WB_SYNC_ALL;
spin_lock(&inode_lock);
- if (!wbc->for_kupdate || list_empty(&sb->s_io))
- queue_io(sb, wbc->older_than_this);
- while (!list_empty(&sb->s_io)) {
- struct inode *inode = list_entry(sb->s_io.prev,
+ if (!wbc->for_kupdate || list_empty(&wb->b_io))
+ queue_io(wb, wbc->older_than_this);
+
+ while (!list_empty(&wb->b_io)) {
+ struct inode *inode = list_entry(wb->b_io.prev,
struct inode, i_list);
- struct address_space *mapping = inode->i_mapping;
- struct backing_dev_info *bdi = mapping->backing_dev_info;
long pages_skipped;
- if (!bdi_cap_writeback_dirty(bdi)) {
+ /*
+ * super block given and doesn't match, skip this inode
+ */
+ if (sb && sb != inode->i_sb) {
redirty_tail(inode);
- if (sb_is_blkdev_sb(sb)) {
+ continue;
+ }
+
+ if (!bdi_cap_writeback_dirty(wb->bdi)) {
+ redirty_tail(inode);
+ if (is_blkdev_sb) {
/*
* Dirty memory-backed blockdev: the ramdisk
* driver does this. Skip just this inode
@@ -492,21 +870,14 @@ void generic_sync_sb_inodes(struct super_block *sb,
continue;
}
- if (wbc->nonblocking && bdi_write_congested(bdi)) {
+ if (wbc->nonblocking && bdi_write_congested(wb->bdi)) {
wbc->encountered_congestion = 1;
- if (!sb_is_blkdev_sb(sb))
+ if (!is_blkdev_sb)
break; /* Skip a congested fs */
requeue_io(inode);
continue; /* Skip a congested blockdev */
}
- if (wbc->bdi && bdi != wbc->bdi) {
- if (!sb_is_blkdev_sb(sb))
- break; /* fs has the wrong queue */
- requeue_io(inode);
- continue; /* blockdev has wrong queue */
- }
-
/*
* Was this inode dirtied after sync_sb_inodes was called?
* This keeps sync from extra jobs and livelock.
@@ -514,16 +885,10 @@ void generic_sync_sb_inodes(struct super_block *sb,
if (inode_dirtied_after(inode, start))
break;
- /* Is another pdflush already flushing this queue? */
- if (current_is_pdflush() && !writeback_acquire(bdi))
- break;
-
BUG_ON(inode->i_state & I_FREEING);
__iget(inode);
pages_skipped = wbc->pages_skipped;
__writeback_single_inode(inode, wbc);
- if (current_is_pdflush())
- writeback_release(bdi);
if (wbc->pages_skipped != pages_skipped) {
/*
* writeback is not making progress due to locked
@@ -539,13 +904,71 @@ void generic_sync_sb_inodes(struct super_block *sb,
wbc->more_io = 1;
break;
}
- if (!list_empty(&sb->s_more_io))
+ if (!list_empty(&wb->b_more_io))
wbc->more_io = 1;
}
- if (sync) {
+ spin_unlock(&inode_lock);
+ /* Leave any unwritten inodes on b_io */
+}
+
+void generic_sync_bdi_inodes(struct super_block *sb,
+ struct writeback_control *wbc)
+{
+ struct backing_dev_info *bdi = wbc->bdi;
+ struct bdi_writeback *wb;
+
+ /*
+ * Common case is just a single wb thread and that is embedded in
+ * the bdi, so it doesn't need locking
+ */
+ if (!bdi_wblist_needs_lock(bdi))
+ generic_sync_wb_inodes(&bdi->wb, sb, wbc);
+ else {
+ int idx;
+
+ idx = srcu_read_lock(&bdi->srcu);
+
+ list_for_each_entry_rcu(wb, &bdi->wb_list, list)
+ generic_sync_wb_inodes(wb, sb, wbc);
+
+ srcu_read_unlock(&bdi->srcu, idx);
+ }
+}
+
+/*
+ * Write out a superblock's list of dirty inodes. A wait will be performed
+ * upon no inodes, all inodes or the final one, depending upon sync_mode.
+ *
+ * If older_than_this is non-NULL, then only write out inodes which
+ * had their first dirtying at a time earlier than *older_than_this.
+ *
+ * If we're a pdlfush thread, then implement pdflush collision avoidance
+ * against the entire list.
+ *
+ * If `bdi' is non-zero then we're being asked to writeback a specific queue.
+ * This function assumes that the blockdev superblock's inodes are backed by
+ * a variety of queues, so all inodes are searched. For other superblocks,
+ * assume that all inodes are backed by the same queue.
+ *
+ * The inodes to be written are parked on bdi->b_io. They are moved back onto
+ * bdi->b_dirty as they are selected for writing. This way, none can be missed
+ * on the writer throttling path, and we get decent balancing between many
+ * throttled threads: we don't want them all piling up on inode_sync_wait.
+ */
+void generic_sync_sb_inodes(struct super_block *sb,
+ struct writeback_control *wbc)
+{
+ if (wbc->bdi)
+ bdi_start_writeback(wbc->bdi, sb, 0);
+ else
+ bdi_writeback_all(sb, 0);
+
+ if (wbc->sync_mode == WB_SYNC_ALL) {
struct inode *inode, *old_inode = NULL;
+ spin_lock(&inode_lock);
+
/*
* Data integrity sync. Must wait for all pages under writeback,
* because there may have been pages dirtied before our sync
@@ -583,10 +1006,8 @@ void generic_sync_sb_inodes(struct super_block *sb,
}
spin_unlock(&inode_lock);
iput(old_inode);
- } else
- spin_unlock(&inode_lock);
+ }
- return; /* Leave any unwritten inodes on s_io */
}
EXPORT_SYMBOL_GPL(generic_sync_sb_inodes);
@@ -597,58 +1018,6 @@ static void sync_sb_inodes(struct super_block *sb,
}
/*
- * Start writeback of dirty pagecache data against all unlocked inodes.
- *
- * Note:
- * We don't need to grab a reference to superblock here. If it has non-empty
- * ->s_dirty it's hadn't been killed yet and kill_super() won't proceed
- * past sync_inodes_sb() until the ->s_dirty/s_io/s_more_io lists are all
- * empty. Since __sync_single_inode() regains inode_lock before it finally moves
- * inode from superblock lists we are OK.
- *
- * If `older_than_this' is non-zero then only flush inodes which have a
- * flushtime older than *older_than_this.
- *
- * If `bdi' is non-zero then we will scan the first inode against each
- * superblock until we find the matching ones. One group will be the dirty
- * inodes against a filesystem. Then when we hit the dummy blockdev superblock,
- * sync_sb_inodes will seekout the blockdev which matches `bdi'. Maybe not
- * super-efficient but we're about to do a ton of I/O...
- */
-void
-writeback_inodes(struct writeback_control *wbc)
-{
- struct super_block *sb;
-
- might_sleep();
- spin_lock(&sb_lock);
-restart:
- list_for_each_entry_reverse(sb, &super_blocks, s_list) {
- if (sb_has_dirty_inodes(sb)) {
- /* we're making our own get_super here */
- sb->s_count++;
- spin_unlock(&sb_lock);
- /*
- * If we can't get the readlock, there's no sense in
- * waiting around, most of the time the FS is going to
- * be unmounted by the time it is released.
- */
- if (down_read_trylock(&sb->s_umount)) {
- if (sb->s_root)
- sync_sb_inodes(sb, wbc);
- up_read(&sb->s_umount);
- }
- spin_lock(&sb_lock);
- if (__put_super_and_need_restart(sb))
- goto restart;
- }
- if (wbc->nr_to_write <= 0)
- break;
- }
- spin_unlock(&sb_lock);
-}
-
-/*
* writeback and wait upon the filesystem's dirty inodes. The caller will
* do this in two passes - one to write, and one to wait.
*
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 91f7c85..e5e8b03 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -484,6 +484,7 @@ int fuse_conn_init(struct fuse_conn *fc, struct super_block *sb)
INIT_LIST_HEAD(&fc->bg_queue);
INIT_LIST_HEAD(&fc->entry);
atomic_set(&fc->num_waiting, 0);
+ fc->bdi.name = "fuse";
fc->bdi.ra_pages = (VM_MAX_READAHEAD * 1024) / PAGE_CACHE_SIZE;
fc->bdi.unplug_io_fn = default_unplug_io_fn;
/* fuse does it's own writeback accounting */
diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index c1462d4..db1e537 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -43,6 +43,7 @@ static const struct inode_operations hugetlbfs_dir_inode_operations;
static const struct inode_operations hugetlbfs_inode_operations;
static struct backing_dev_info hugetlbfs_backing_dev_info = {
+ .name = "hugetlbfs",
.ra_pages = 0, /* No readahead */
.capabilities = BDI_CAP_NO_ACCT_AND_WRITEBACK,
};
diff --git a/fs/nfs/client.c b/fs/nfs/client.c
index 75c9cd2..3a26d06 100644
--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -836,6 +836,7 @@ static void nfs_server_set_fsinfo(struct nfs_server *server, struct nfs_fsinfo *
server->rsize = NFS_MAX_FILE_IO_SIZE;
server->rpages = (server->rsize + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
+ server->backing_dev_info.name = "nfs";
server->backing_dev_info.ra_pages = server->rpages * NFS_MAX_READAHEAD;
if (server->wsize > max_rpc_payload)
diff --git a/fs/ntfs/super.c b/fs/ntfs/super.c
index f76951d..c4cb157 100644
--- a/fs/ntfs/super.c
+++ b/fs/ntfs/super.c
@@ -2373,39 +2373,13 @@ static void ntfs_put_super(struct super_block *sb)
vol->mftmirr_ino = NULL;
}
/*
- * If any dirty inodes are left, throw away all mft data page cache
- * pages to allow a clean umount. This should never happen any more
- * due to mft.c::ntfs_mft_writepage() cleaning all the dirty pages as
- * the underlying mft records are written out and cleaned. If it does,
+ * We should have no dirty inodes left, due to
+ * mft.c::ntfs_mft_writepage() cleaning all the dirty pages as
+ * the underlying mft records are written out and cleaned.
* happen anyway, we want to know...
*/
ntfs_commit_inode(vol->mft_ino);
write_inode_now(vol->mft_ino, 1);
- if (sb_has_dirty_inodes(sb)) {
- const char *s1, *s2;
-
- mutex_lock(&vol->mft_ino->i_mutex);
- truncate_inode_pages(vol->mft_ino->i_mapping, 0);
- mutex_unlock(&vol->mft_ino->i_mutex);
- write_inode_now(vol->mft_ino, 1);
- if (sb_has_dirty_inodes(sb)) {
- static const char *_s1 = "inodes";
- static const char *_s2 = "";
- s1 = _s1;
- s2 = _s2;
- } else {
- static const char *_s1 = "mft pages";
- static const char *_s2 = "They have been thrown "
- "away. ";
- s1 = _s1;
- s2 = _s2;
- }
- ntfs_error(sb, "Dirty %s found at umount time. %sYou should "
- "run chkdsk. Please email "
- "linux-ntfs-dev@lists.sourceforge.net and say "
- "that you saw this message. Thank you.", s1,
- s2);
- }
#endif /* NTFS_RW */
iput(vol->mft_ino);
diff --git a/fs/ocfs2/dlm/dlmfs.c b/fs/ocfs2/dlm/dlmfs.c
index 1c9efb4..02bf178 100644
--- a/fs/ocfs2/dlm/dlmfs.c
+++ b/fs/ocfs2/dlm/dlmfs.c
@@ -325,6 +325,7 @@ clear_fields:
}
static struct backing_dev_info dlmfs_backing_dev_info = {
+ .name = "ocfs2-dlmfs",
.ra_pages = 0, /* No readahead */
.capabilities = BDI_CAP_NO_ACCT_AND_WRITEBACK,
};
diff --git a/fs/ramfs/inode.c b/fs/ramfs/inode.c
index 3a6b193..5a24199 100644
--- a/fs/ramfs/inode.c
+++ b/fs/ramfs/inode.c
@@ -46,6 +46,7 @@ static const struct super_operations ramfs_ops;
static const struct inode_operations ramfs_dir_inode_operations;
static struct backing_dev_info ramfs_backing_dev_info = {
+ .name = "ramfs",
.ra_pages = 0, /* No readahead */
.capabilities = BDI_CAP_NO_ACCT_AND_WRITEBACK |
BDI_CAP_MAP_DIRECT | BDI_CAP_MAP_COPY |
diff --git a/fs/super.c b/fs/super.c
index 1943fdf..76dd5b2 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -64,9 +64,6 @@ static struct super_block *alloc_super(struct file_system_type *type)
s = NULL;
goto out;
}
- INIT_LIST_HEAD(&s->s_dirty);
- INIT_LIST_HEAD(&s->s_io);
- INIT_LIST_HEAD(&s->s_more_io);
INIT_LIST_HEAD(&s->s_files);
INIT_LIST_HEAD(&s->s_instances);
INIT_HLIST_HEAD(&s->s_anon);
diff --git a/fs/sync.c b/fs/sync.c
index 7abc65f..3887f10 100644
--- a/fs/sync.c
+++ b/fs/sync.c
@@ -23,7 +23,7 @@
*/
static void do_sync(unsigned long wait)
{
- wakeup_pdflush(0);
+ wakeup_flusher_threads(0);
sync_inodes(0); /* All mappings, inodes and their blockdevs */
vfs_dq_sync(NULL);
sync_supers(); /* Write the superblocks */
diff --git a/fs/sysfs/inode.c b/fs/sysfs/inode.c
index 555f0ff..e57f98e 100644
--- a/fs/sysfs/inode.c
+++ b/fs/sysfs/inode.c
@@ -29,6 +29,7 @@ static const struct address_space_operations sysfs_aops = {
};
static struct backing_dev_info sysfs_backing_dev_info = {
+ .name = "sysfs",
.ra_pages = 0, /* No readahead */
.capabilities = BDI_CAP_NO_ACCT_AND_WRITEBACK,
};
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index e9f7a75..2349e2c 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -1923,6 +1923,7 @@ static int ubifs_fill_super(struct super_block *sb, void *data, int silent)
*
* Read-ahead will be disabled because @c->bdi.ra_pages is 0.
*/
+ c->bdi.name = "ubifs",
c->bdi.capabilities = BDI_CAP_MAP_COPY;
c->bdi.unplug_io_fn = default_unplug_io_fn;
err = bdi_init(&c->bdi);
diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
index 0ec2c59..7c2874f 100644
--- a/include/linux/backing-dev.h
+++ b/include/linux/backing-dev.h
@@ -13,6 +13,8 @@
#include <linux/proportions.h>
#include <linux/kernel.h>
#include <linux/fs.h>
+#include <linux/sched.h>
+#include <linux/srcu.h>
#include <asm/atomic.h>
struct page;
@@ -23,9 +25,12 @@ struct dentry;
* Bits in backing_dev_info.state
*/
enum bdi_state {
- BDI_pdflush, /* A pdflush thread is working this device */
+ BDI_pending, /* On its way to being activated */
+ BDI_wb_alloc, /* Default embedded wb allocated */
+ BDI_wblist_lock, /* bdi->wb_list now needs locking */
BDI_async_congested, /* The async (write) queue is getting full */
BDI_sync_congested, /* The sync queue is getting full */
+ BDI_registered, /* bdi_register() was done */
BDI_unused, /* Available bits start here */
};
@@ -39,7 +44,25 @@ enum bdi_stat_item {
#define BDI_STAT_BATCH (8*(1+ilog2(nr_cpu_ids)))
+struct bdi_writeback {
+ struct list_head list; /* hangs off the bdi */
+
+ struct backing_dev_info *bdi; /* our parent bdi */
+ unsigned int nr;
+
+ struct task_struct *task; /* writeback task */
+ wait_queue_head_t wait;
+ struct list_head b_dirty; /* dirty inodes */
+ struct list_head b_io; /* parked for writeback */
+ struct list_head b_more_io; /* parked for more writeback */
+};
+
+#define BDI_MAX_FLUSHERS 32
+
struct backing_dev_info {
+ struct rcu_head rcu_head;
+ struct srcu_struct srcu; /* for wb_list read side protection */
+ struct list_head bdi_list;
unsigned long ra_pages; /* max readahead in PAGE_CACHE_SIZE units */
unsigned long state; /* Always use atomic bitops on this */
unsigned int capabilities; /* Device capabilities */
@@ -48,6 +71,8 @@ struct backing_dev_info {
void (*unplug_io_fn)(struct backing_dev_info *, struct page *);
void *unplug_io_data;
+ char *name;
+
struct percpu_counter bdi_stat[NR_BDI_STAT_ITEMS];
struct prop_local_percpu completions;
@@ -56,6 +81,14 @@ struct backing_dev_info {
unsigned int min_ratio;
unsigned int max_ratio, max_prop_frac;
+ struct bdi_writeback wb; /* default writeback info for this bdi */
+ spinlock_t wb_lock; /* protects update side of wb_list */
+ struct list_head wb_list; /* the flusher threads hanging off this bdi */
+ unsigned long wb_mask; /* bitmask of registered tasks */
+ unsigned int wb_cnt; /* number of registered tasks */
+
+ struct list_head work_list;
+
struct device *dev;
#ifdef CONFIG_DEBUG_FS
@@ -71,6 +104,33 @@ int bdi_register(struct backing_dev_info *bdi, struct device *parent,
const char *fmt, ...);
int bdi_register_dev(struct backing_dev_info *bdi, dev_t dev);
void bdi_unregister(struct backing_dev_info *bdi);
+int bdi_start_writeback(struct backing_dev_info *bdi, struct super_block *sb,
+ long nr_pages);
+int bdi_writeback_task(struct bdi_writeback *wb);
+void bdi_writeback_all(struct super_block *sb, long nr_pages);
+void bdi_add_default_flusher_task(struct backing_dev_info *bdi);
+void bdi_add_flusher_task(struct backing_dev_info *bdi);
+int bdi_has_dirty_io(struct backing_dev_info *bdi);
+
+extern spinlock_t bdi_lock;
+extern struct list_head bdi_list;
+
+static inline int wb_is_default_task(struct bdi_writeback *wb)
+{
+ return wb == &wb->bdi->wb;
+}
+
+static inline int bdi_wblist_needs_lock(struct backing_dev_info *bdi)
+{
+ return test_bit(BDI_wblist_lock, &bdi->state);
+}
+
+static inline int wb_has_dirty_io(struct bdi_writeback *wb)
+{
+ return !list_empty(&wb->b_dirty) ||
+ !list_empty(&wb->b_io) ||
+ !list_empty(&wb->b_more_io);
+}
static inline void __add_bdi_stat(struct backing_dev_info *bdi,
enum bdi_stat_item item, s64 amount)
@@ -187,6 +247,7 @@ int bdi_set_max_ratio(struct backing_dev_info *bdi, unsigned int max_ratio);
#define BDI_CAP_EXEC_MAP 0x00000040
#define BDI_CAP_NO_ACCT_WB 0x00000080
#define BDI_CAP_SWAP_BACKED 0x00000100
+#define BDI_CAP_FLUSH_FORKER 0x00000200
#define BDI_CAP_VMFLAGS \
(BDI_CAP_READ_MAP | BDI_CAP_WRITE_MAP | BDI_CAP_EXEC_MAP)
@@ -256,6 +317,11 @@ static inline bool bdi_cap_swap_backed(struct backing_dev_info *bdi)
return bdi->capabilities & BDI_CAP_SWAP_BACKED;
}
+static inline bool bdi_cap_flush_forker(struct backing_dev_info *bdi)
+{
+ return bdi->capabilities & BDI_CAP_FLUSH_FORKER;
+}
+
static inline bool mapping_cap_writeback_dirty(struct address_space *mapping)
{
return bdi_cap_writeback_dirty(mapping->backing_dev_info);
@@ -271,4 +337,10 @@ static inline bool mapping_cap_swap_backed(struct address_space *mapping)
return bdi_cap_swap_backed(mapping->backing_dev_info);
}
+static inline int bdi_sched_wait(void *word)
+{
+ schedule();
+ return 0;
+}
+
#endif /* _LINUX_BACKING_DEV_H */
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 3b534e5..d3bda5d 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -712,7 +712,7 @@ static inline int mapping_writably_mapped(struct address_space *mapping)
struct inode {
struct hlist_node i_hash;
- struct list_head i_list;
+ struct list_head i_list; /* backing dev IO list */
struct list_head i_sb_list;
struct list_head i_dentry;
unsigned long i_ino;
@@ -1329,9 +1329,6 @@ struct super_block {
struct xattr_handler **s_xattr;
struct list_head s_inodes; /* all inodes */
- struct list_head s_dirty; /* dirty inodes */
- struct list_head s_io; /* parked for writeback */
- struct list_head s_more_io; /* parked for more writeback */
struct hlist_head s_anon; /* anonymous dentries for (nfs) exporting */
struct list_head s_files;
/* s_dentry_lru and s_nr_dentry_unused are protected by dcache_lock */
@@ -1553,11 +1550,14 @@ extern ssize_t vfs_readv(struct file *, const struct iovec __user *,
extern ssize_t vfs_writev(struct file *, const struct iovec __user *,
unsigned long, loff_t *);
+struct bdi_writeback;
+
struct super_operations {
struct inode *(*alloc_inode)(struct super_block *sb);
void (*destroy_inode)(struct inode *);
void (*dirty_inode) (struct inode *);
+ struct bdi_writeback *(*inode_get_wb) (struct inode *);
int (*write_inode) (struct inode *, int);
void (*drop_inode) (struct inode *);
void (*delete_inode) (struct inode *);
@@ -2066,6 +2066,8 @@ extern int invalidate_inode_pages2_range(struct address_space *mapping,
pgoff_t start, pgoff_t end);
extern void generic_sync_sb_inodes(struct super_block *sb,
struct writeback_control *wbc);
+extern void generic_sync_bdi_inodes(struct super_block *sb,
+ struct writeback_control *);
extern int write_inode_now(struct inode *, int);
extern int filemap_fdatawrite(struct address_space *);
extern int filemap_flush(struct address_space *);
@@ -2183,7 +2185,6 @@ extern int bdev_read_only(struct block_device *);
extern int set_blocksize(struct block_device *, int);
extern int sb_set_blocksize(struct super_block *, int);
extern int sb_min_blocksize(struct super_block *, int);
-extern int sb_has_dirty_inodes(struct super_block *);
extern int generic_file_mmap(struct file *, struct vm_area_struct *);
extern int generic_file_readonly_mmap(struct file *, struct vm_area_struct *);
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index 9344547..30e318b 100644
--- a/include/linux/writeback.h
+++ b/include/linux/writeback.h
@@ -14,17 +14,6 @@ extern struct list_head inode_in_use;
extern struct list_head inode_unused;
/*
- * Yes, writeback.h requires sched.h
- * No, sched.h is not included from here.
- */
-static inline int task_is_pdflush(struct task_struct *task)
-{
- return task->flags & PF_FLUSHER;
-}
-
-#define current_is_pdflush() task_is_pdflush(current)
-
-/*
* fs/fs-writeback.c
*/
enum writeback_sync_modes {
@@ -80,6 +69,7 @@ void writeback_inodes(struct writeback_control *wbc);
int inode_wait(void *);
void sync_inodes_sb(struct super_block *, int wait);
void sync_inodes(int wait);
+long wb_do_writeback(struct bdi_writeback *wb);
/* writeback.h requires fs.h; it, too, is not included from here. */
static inline void wait_on_inode(struct inode *inode)
@@ -99,7 +89,7 @@ static inline void inode_sync_wait(struct inode *inode)
/*
* mm/page-writeback.c
*/
-int wakeup_pdflush(long nr_pages);
+void wakeup_flusher_threads(long nr_pages);
void laptop_io_completion(void);
void laptop_sync_completion(void);
void throttle_vm_writeout(gfp_t gfp_mask);
@@ -151,7 +141,6 @@ balance_dirty_pages_ratelimited(struct address_space *mapping)
typedef int (*writepage_t)(struct page *page, struct writeback_control *wbc,
void *data);
-int pdflush_operation(void (*fn)(unsigned long), unsigned long arg0);
int generic_writepages(struct address_space *mapping,
struct writeback_control *wbc);
int write_cache_pages(struct address_space *mapping,
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index a7267bf..0863c5f 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -598,6 +598,7 @@ static struct inode_operations cgroup_dir_inode_operations;
static struct file_operations proc_cgroupstats_operations;
static struct backing_dev_info cgroup_backing_dev_info = {
+ .name = "cgroup",
.capabilities = BDI_CAP_NO_ACCT_AND_WRITEBACK,
};
diff --git a/mm/Makefile b/mm/Makefile
index ec73c68..2adb811 100644
--- a/mm/Makefile
+++ b/mm/Makefile
@@ -8,7 +8,7 @@ mmu-$(CONFIG_MMU) := fremap.o highmem.o madvise.o memory.o mincore.o \
vmalloc.o
obj-y := bootmem.o filemap.o mempool.o oom_kill.o fadvise.o \
- maccess.o page_alloc.o page-writeback.o pdflush.o \
+ maccess.o page_alloc.o page-writeback.o \
readahead.o swap.o truncate.o vmscan.o shmem.o \
prio_tree.o util.o mmzone.o vmstat.o backing-dev.o \
page_isolation.o mm_init.o $(mmu-y)
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index 493b468..d45251f 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -1,8 +1,11 @@
#include <linux/wait.h>
#include <linux/backing-dev.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
#include <linux/fs.h>
#include <linux/pagemap.h>
+#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/module.h>
#include <linux/writeback.h>
@@ -14,14 +17,18 @@ void default_unplug_io_fn(struct backing_dev_info *bdi, struct page *page)
EXPORT_SYMBOL(default_unplug_io_fn);
struct backing_dev_info default_backing_dev_info = {
+ .name = "default",
.ra_pages = VM_MAX_READAHEAD * 1024 / PAGE_CACHE_SIZE,
.state = 0,
- .capabilities = BDI_CAP_MAP_COPY,
+ .capabilities = BDI_CAP_MAP_COPY | BDI_CAP_FLUSH_FORKER,
.unplug_io_fn = default_unplug_io_fn,
};
EXPORT_SYMBOL_GPL(default_backing_dev_info);
static struct class *bdi_class;
+DEFINE_SPINLOCK(bdi_lock);
+LIST_HEAD(bdi_list);
+LIST_HEAD(bdi_pending_list);
#ifdef CONFIG_DEBUG_FS
#include <linux/debugfs.h>
@@ -37,9 +44,33 @@ static void bdi_debug_init(void)
static int bdi_debug_stats_show(struct seq_file *m, void *v)
{
struct backing_dev_info *bdi = m->private;
+ struct bdi_writeback *wb;
unsigned long background_thresh;
unsigned long dirty_thresh;
unsigned long bdi_thresh;
+ unsigned long nr_dirty, nr_io, nr_more_io, nr_wb;
+ struct inode *inode;
+
+ /*
+ * inode lock is enough here, the bdi->wb_list is protected by
+ * RCU on the reader side
+ */
+ nr_wb = nr_dirty = nr_io = nr_more_io = 0;
+ spin_lock(&inode_lock);
+ list_for_each_entry(wb, &bdi->wb_list, list) {
+ nr_wb++;
+ list_for_each_entry(inode, &wb->b_dirty, i_list)
+ nr_dirty++;
+ list_for_each_entry(inode, &wb->b_io, i_list)
+ nr_io++;
+ list_for_each_entry(inode, &wb->b_more_io, i_list)
+ nr_more_io++;
+ }
+ spin_unlock(&inode_lock);
+
+ nr_dirty <<= (PAGE_CACHE_SHIFT - 10);
+ nr_io <<= (PAGE_CACHE_SHIFT - 10);
+ nr_more_io <<= (PAGE_CACHE_SHIFT - 10);
get_dirty_limits(&background_thresh, &dirty_thresh, &bdi_thresh, bdi);
@@ -49,12 +80,23 @@ static int bdi_debug_stats_show(struct seq_file *m, void *v)
"BdiReclaimable: %8lu kB\n"
"BdiDirtyThresh: %8lu kB\n"
"DirtyThresh: %8lu kB\n"
- "BackgroundThresh: %8lu kB\n",
+ "BackgroundThresh: %8lu kB\n"
+ "WriteBack threads:%8lu\n"
+ "b_dirty: %8lu\n"
+ "b_io: %8lu\n"
+ "b_more_io: %8lu\n"
+ "bdi: %8p\n"
+ "bdi_list: %8u\n"
+ "state: %8lx\n"
+ "wb_mask: %8lx\n"
+ "wb_list: %8u\n"
+ "wb_cnt: %8u\n",
(unsigned long) K(bdi_stat(bdi, BDI_WRITEBACK)),
(unsigned long) K(bdi_stat(bdi, BDI_RECLAIMABLE)),
- K(bdi_thresh),
- K(dirty_thresh),
- K(background_thresh));
+ K(bdi_thresh), K(dirty_thresh),
+ K(background_thresh), nr_wb, nr_dirty, nr_io, nr_more_io,
+ bdi, !list_empty(&bdi->bdi_list), bdi->state, bdi->wb_mask,
+ !list_empty(&bdi->wb_list), bdi->wb_cnt);
#undef K
return 0;
@@ -193,6 +235,346 @@ static int __init default_bdi_init(void)
}
subsys_initcall(default_bdi_init);
+static int wb_assign_nr(struct backing_dev_info *bdi, struct bdi_writeback *wb)
+{
+ unsigned long mask = BDI_MAX_FLUSHERS - 1;
+ unsigned int nr;
+
+ do {
+ if ((bdi->wb_mask & mask) == mask)
+ return 1;
+
+ nr = find_first_zero_bit(&bdi->wb_mask, BDI_MAX_FLUSHERS);
+ } while (test_and_set_bit(nr, &bdi->wb_mask));
+
+ wb->nr = nr;
+
+ spin_lock(&bdi->wb_lock);
+ bdi->wb_cnt++;
+ spin_unlock(&bdi->wb_lock);
+
+ return 0;
+}
+
+static void bdi_put_wb(struct backing_dev_info *bdi, struct bdi_writeback *wb)
+{
+ clear_bit(wb->nr, &bdi->wb_mask);
+
+ if (wb == &bdi->wb)
+ clear_bit(BDI_wb_alloc, &bdi->state);
+ else
+ kfree(wb);
+
+ spin_lock(&bdi->wb_lock);
+ bdi->wb_cnt--;
+ spin_unlock(&bdi->wb_lock);
+}
+
+static int bdi_wb_init(struct bdi_writeback *wb, struct backing_dev_info *bdi)
+{
+ memset(wb, 0, sizeof(*wb));
+
+ wb->bdi = bdi;
+ init_waitqueue_head(&wb->wait);
+ INIT_LIST_HEAD(&wb->b_dirty);
+ INIT_LIST_HEAD(&wb->b_io);
+ INIT_LIST_HEAD(&wb->b_more_io);
+
+ return wb_assign_nr(bdi, wb);
+}
+
+static struct bdi_writeback *bdi_new_wb(struct backing_dev_info *bdi)
+{
+ struct bdi_writeback *wb;
+
+ /*
+ * Default bdi->wb is already assigned, so just return it
+ */
+ if (!test_and_set_bit(BDI_wb_alloc, &bdi->state))
+ wb = &bdi->wb;
+ else {
+ wb = kmalloc(sizeof(struct bdi_writeback), GFP_KERNEL);
+ if (wb) {
+ if (bdi_wb_init(wb, bdi)) {
+ kfree(wb);
+ wb = NULL;
+ }
+ }
+ }
+
+ return wb;
+}
+
+static void bdi_flush_io(struct backing_dev_info *bdi)
+{
+ struct writeback_control wbc = {
+ .bdi = bdi,
+ .sync_mode = WB_SYNC_NONE,
+ .older_than_this = NULL,
+ .range_cyclic = 1,
+ .nr_to_write = 1024,
+ };
+
+ generic_sync_bdi_inodes(NULL, &wbc);
+}
+
+static void bdi_task_init(struct backing_dev_info *bdi,
+ struct bdi_writeback *wb)
+{
+ struct task_struct *tsk = current;
+ int was_empty;
+
+ /*
+ * Add us to the active bdi_list. If we are adding threads beyond
+ * the default embedded bdi_writeback, then we need to start using
+ * proper locking. Check the list for empty first, then set the
+ * BDI_wblist_lock flag if there's > 1 entry on the list now
+ */
+ spin_lock(&bdi->wb_lock);
+
+ was_empty = list_empty(&bdi->wb_list);
+ list_add_tail_rcu(&wb->list, &bdi->wb_list);
+ if (!was_empty)
+ set_bit(BDI_wblist_lock, &bdi->state);
+
+ spin_unlock(&bdi->wb_lock);
+
+ tsk->flags |= PF_FLUSHER | PF_SWAPWRITE;
+ set_freezable();
+
+ /*
+ * Our parent may run at a different priority, just set us to normal
+ */
+ set_user_nice(tsk, 0);
+}
+
+static int bdi_start_fn(void *ptr)
+{
+ struct bdi_writeback *wb = ptr;
+ struct backing_dev_info *bdi = wb->bdi;
+ int ret;
+
+ bdi_task_init(bdi, wb);
+
+ /*
+ * Clear pending bit and wakeup anybody waiting to tear us down
+ */
+ clear_bit(BDI_pending, &bdi->state);
+ wake_up_bit(&bdi->state, BDI_pending);
+
+ /*
+ * Make us discoverable on the bdi_list again
+ */
+ spin_lock(&bdi_lock);
+ list_add_tail_rcu(&bdi->bdi_list, &bdi_list);
+ spin_unlock(&bdi_lock);
+
+ ret = bdi_writeback_task(wb);
+
+ /*
+ * Remove us from the list
+ */
+ spin_lock(&bdi->wb_lock);
+ list_del_rcu(&wb->list);
+ spin_unlock(&bdi->wb_lock);
+
+ /*
+ * wait for rcu grace period to end, so we can free wb
+ */
+ synchronize_srcu(&bdi->srcu);
+
+ bdi_put_wb(bdi, wb);
+ return ret;
+}
+
+int bdi_has_dirty_io(struct backing_dev_info *bdi)
+{
+ struct bdi_writeback *wb;
+ int ret = 0;
+
+ if (!bdi_wblist_needs_lock(bdi))
+ ret = wb_has_dirty_io(&bdi->wb);
+ else {
+ int idx;
+
+ idx = srcu_read_lock(&bdi->srcu);
+
+ list_for_each_entry_rcu(wb, &bdi->wb_list, list) {
+ ret = wb_has_dirty_io(wb);
+ if (ret)
+ break;
+ }
+
+ srcu_read_unlock(&bdi->srcu, idx);
+ }
+
+ return ret;
+}
+
+static int bdi_forker_task(void *ptr)
+{
+ struct bdi_writeback *me = ptr;
+ DEFINE_WAIT(wait);
+
+ bdi_task_init(me->bdi, me);
+
+ for (;;) {
+ struct backing_dev_info *bdi;
+ struct bdi_writeback *wb;
+
+ prepare_to_wait(&me->wait, &wait, TASK_INTERRUPTIBLE);
+
+ smp_mb();
+ if (list_empty(&bdi_pending_list))
+ schedule();
+
+ /*
+ * Ideally we'd like not to see any dirty inodes on the
+ * default_backing_dev_info. Until these are tracked down,
+ * perform the same writeback here that bdi_writeback_task
+ * does. For logic, see comment in
+ * fs/fs-writeback.c:bdi_writeback_task()
+ */
+ if (wb_has_dirty_io(me) || !list_empty(&me->bdi->work_list))
+ wb_do_writeback(me);
+
+ /*
+ * This is our real job - check for pending entries in
+ * bdi_pending_list, and create the tasks that got added
+ */
+repeat:
+ bdi = NULL;
+ spin_lock_bh(&bdi_lock);
+ if (!list_empty(&bdi_pending_list)) {
+ bdi = list_entry(bdi_pending_list.next,
+ struct backing_dev_info, bdi_list);
+ list_del_init(&bdi->bdi_list);
+ }
+ spin_unlock_bh(&bdi_lock);
+
+ if (!bdi)
+ continue;
+
+ wb = bdi_new_wb(bdi);
+ if (!wb)
+ goto readd_flush;
+
+ wb->task = kthread_run(bdi_start_fn, wb, "bdi-%s",
+ dev_name(bdi->dev));
+ /*
+ * If task creation fails, then readd the bdi to
+ * the pending list and force writeout of the bdi
+ * from this forker thread. That will free some memory
+ * and we can try again.
+ */
+ if (!wb->task) {
+ bdi_put_wb(bdi, wb);
+readd_flush:
+ /*
+ * Add this 'bdi' to the back, so we get
+ * a chance to flush other bdi's to free
+ * memory.
+ */
+ spin_lock_bh(&bdi_lock);
+ list_add_tail(&bdi->bdi_list, &bdi_pending_list);
+ spin_unlock_bh(&bdi_lock);
+
+ bdi_flush_io(bdi);
+ goto repeat;
+ }
+ }
+
+ finish_wait(&me->wait, &wait);
+ return 0;
+}
+
+/*
+ * Grace period has now ended, init bdi->bdi_list and add us to the
+ * list of bdi's that are pending for task creation. Wake up
+ * bdi_forker_task() to finish the job and add us back to the
+ * active bdi_list.
+ */
+static void bdi_add_to_pending(struct rcu_head *head)
+{
+ struct backing_dev_info *bdi;
+
+ bdi = container_of(head, struct backing_dev_info, rcu_head);
+ INIT_LIST_HEAD(&bdi->bdi_list);
+
+ spin_lock(&bdi_lock);
+ list_add_tail(&bdi->bdi_list, &bdi_pending_list);
+ spin_unlock(&bdi_lock);
+
+ wake_up(&default_backing_dev_info.wb.wait);
+}
+
+static void bdi_add_one_flusher_task(struct backing_dev_info *bdi,
+ int(*func)(struct backing_dev_info *))
+{
+ if (!bdi_cap_writeback_dirty(bdi))
+ return;
+
+ if (WARN_ON(!test_bit(BDI_registered, &bdi->state))) {
+ printk("bdi %p/%s is not registered!\n", bdi, bdi->name);
+ return;
+ }
+
+ /*
+ * Check with the helper whether to proceed adding a task. Will only
+ * abort if we two or more simultanous calls to
+ * bdi_add_default_flusher_task() occured, further additions will block
+ * waiting for previous additions to finish.
+ */
+ if (!func(bdi)) {
+ spin_lock_bh(&bdi_lock);
+ list_del_rcu(&bdi->bdi_list);
+ spin_unlock_bh(&bdi_lock);
+
+ /*
+ * We need to wait for the current grace period to end,
+ * in case others were browsing the bdi_list as well.
+ * So defer the adding and wakeup to after the RCU
+ * grace period has ended.
+ */
+ call_rcu(&bdi->rcu_head, bdi_add_to_pending);
+ }
+}
+
+static int flusher_add_helper_block(struct backing_dev_info *bdi)
+{
+ wait_on_bit_lock(&bdi->state, BDI_pending, bdi_sched_wait,
+ TASK_UNINTERRUPTIBLE);
+ return 0;
+}
+
+static int flusher_add_helper_test(struct backing_dev_info *bdi)
+{
+ return test_and_set_bit(BDI_pending, &bdi->state);
+}
+
+/*
+ * Add the default flusher task that gets created for any bdi
+ * that has dirty data pending writeout
+ */
+void bdi_add_default_flusher_task(struct backing_dev_info *bdi)
+{
+ bdi_add_one_flusher_task(bdi, flusher_add_helper_test);
+}
+
+/**
+ * bdi_add_flusher_task - add one more flusher task to this @bdi
+ * @bdi: the bdi
+ *
+ * Add an additional flusher task to this @bdi. Will block waiting on
+ * previous additions, if any.
+ *
+ */
+void bdi_add_flusher_task(struct backing_dev_info *bdi)
+{
+ bdi_add_one_flusher_task(bdi, flusher_add_helper_block);
+}
+EXPORT_SYMBOL(bdi_add_flusher_task);
+
int bdi_register(struct backing_dev_info *bdi, struct device *parent,
const char *fmt, ...)
{
@@ -211,8 +593,36 @@ int bdi_register(struct backing_dev_info *bdi, struct device *parent,
goto exit;
}
+ /*
+ * Just start the forker thread for our default backing_dev_info,
+ * and add other bdi's to the list. They will get a thread created
+ * on-demand when they need it.
+ */
+ if (bdi_cap_flush_forker(bdi)) {
+ struct bdi_writeback *wb;
+
+ wb = bdi_new_wb(bdi);
+ if (!wb) {
+ ret = -ENOMEM;
+ goto exit;
+ }
+
+ wb->task = kthread_run(bdi_forker_task, wb, "bdi-%s",
+ dev_name(dev));
+ if (!wb->task) {
+ bdi_put_wb(bdi, wb);
+ ret = -ENOMEM;
+ goto exit;
+ }
+ }
+
+ spin_lock_bh(&bdi_lock);
+ list_add_tail_rcu(&bdi->bdi_list, &bdi_list);
+ spin_unlock_bh(&bdi_lock);
+
bdi->dev = dev;
bdi_debug_register(bdi, dev_name(dev));
+ set_bit(BDI_registered, &bdi->state);
exit:
return ret;
@@ -225,9 +635,49 @@ int bdi_register_dev(struct backing_dev_info *bdi, dev_t dev)
}
EXPORT_SYMBOL(bdi_register_dev);
+/*
+ * Remove bdi from global list and shutdown any threads we have running
+ */
+static void bdi_wb_shutdown(struct backing_dev_info *bdi)
+{
+ struct bdi_writeback *wb;
+
+ if (!bdi_cap_writeback_dirty(bdi))
+ return;
+
+ /*
+ * If setup is pending, wait for that to complete first
+ * Make sure nobody finds us on the bdi_list anymore
+ */
+ wait_on_bit(&bdi->state, BDI_pending, bdi_sched_wait,
+ TASK_UNINTERRUPTIBLE);
+
+ /*
+ * Make sure nobody finds us on the bdi_list anymore
+ */
+ spin_lock_bh(&bdi_lock);
+ list_del_rcu(&bdi->bdi_list);
+ spin_unlock_bh(&bdi_lock);
+
+ /*
+ * Now make sure that anybody who is currently looking at us from
+ * the bdi_list iteration have exited.
+ */
+ synchronize_rcu();
+
+ /*
+ * Finally, kill the kernel threads. We don't need to be RCU
+ * safe anymore, since the bdi is gone from visibility.
+ */
+ list_for_each_entry(wb, &bdi->wb_list, list)
+ kthread_stop(wb->task);
+}
+
void bdi_unregister(struct backing_dev_info *bdi)
{
if (bdi->dev) {
+ if (!bdi_cap_flush_forker(bdi))
+ bdi_wb_shutdown(bdi);
bdi_debug_unregister(bdi);
device_unregister(bdi->dev);
bdi->dev = NULL;
@@ -237,14 +687,22 @@ EXPORT_SYMBOL(bdi_unregister);
int bdi_init(struct backing_dev_info *bdi)
{
- int i;
- int err;
+ int i, err;
+ INIT_RCU_HEAD(&bdi->rcu_head);
bdi->dev = NULL;
bdi->min_ratio = 0;
bdi->max_ratio = 100;
bdi->max_prop_frac = PROP_FRAC_BASE;
+ spin_lock_init(&bdi->wb_lock);
+ bdi->wb_mask = 0;
+ bdi->wb_cnt = 0;
+ INIT_LIST_HEAD(&bdi->bdi_list);
+ INIT_LIST_HEAD(&bdi->wb_list);
+ INIT_LIST_HEAD(&bdi->work_list);
+
+ bdi_wb_init(&bdi->wb, bdi);
for (i = 0; i < NR_BDI_STAT_ITEMS; i++) {
err = percpu_counter_init(&bdi->bdi_stat[i], 0);
@@ -252,10 +710,15 @@ int bdi_init(struct backing_dev_info *bdi)
goto err;
}
+ err = init_srcu_struct(&bdi->srcu);
+ if (err)
+ goto err;
+
bdi->dirty_exceeded = 0;
err = prop_local_init_percpu(&bdi->completions);
if (err) {
+ cleanup_srcu_struct(&bdi->srcu);
err:
while (i--)
percpu_counter_destroy(&bdi->bdi_stat[i]);
@@ -269,8 +732,12 @@ void bdi_destroy(struct backing_dev_info *bdi)
{
int i;
+ WARN_ON(bdi_has_dirty_io(bdi));
+
bdi_unregister(bdi);
+ cleanup_srcu_struct(&bdi->srcu);
+
for (i = 0; i < NR_BDI_STAT_ITEMS; i++)
percpu_counter_destroy(&bdi->bdi_stat[i]);
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index bb553c3..de3178a 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -36,15 +36,6 @@
#include <linux/pagevec.h>
/*
- * The maximum number of pages to writeout in a single bdflush/kupdate
- * operation. We do this so we don't hold I_SYNC against an inode for
- * enormous amounts of time, which would block a userspace task which has
- * been forced to throttle against that inode. Also, the code reevaluates
- * the dirty each time it has written this many pages.
- */
-#define MAX_WRITEBACK_PAGES 1024
-
-/*
* After a CPU has dirtied this many pages, balance_dirty_pages_ratelimited
* will look to see if it needs to force writeback or throttling.
*/
@@ -117,8 +108,6 @@ EXPORT_SYMBOL(laptop_mode);
/* End of sysctl-exported parameters */
-static void background_writeout(unsigned long _min_pages);
-
/*
* Scale the writeback cache size proportional to the relative writeout speeds.
*
@@ -319,7 +308,6 @@ static void task_dirty_limit(struct task_struct *tsk, long *pdirty)
/*
*
*/
-static DEFINE_SPINLOCK(bdi_lock);
static unsigned int bdi_min_ratio;
int bdi_set_min_ratio(struct backing_dev_info *bdi, unsigned int min_ratio)
@@ -542,7 +530,7 @@ static void balance_dirty_pages(struct address_space *mapping)
* been flushed to permanent storage.
*/
if (bdi_nr_reclaimable) {
- writeback_inodes(&wbc);
+ generic_sync_bdi_inodes(NULL, &wbc);
pages_written += write_chunk - wbc.nr_to_write;
get_dirty_limits(&background_thresh, &dirty_thresh,
&bdi_thresh, bdi);
@@ -593,7 +581,7 @@ static void balance_dirty_pages(struct address_space *mapping)
(!laptop_mode && (global_page_state(NR_FILE_DIRTY)
+ global_page_state(NR_UNSTABLE_NFS)
> background_thresh)))
- pdflush_operation(background_writeout, 0);
+ bdi_start_writeback(bdi, NULL, 0);
}
void set_page_dirty_balance(struct page *page, int page_mkwrite)
@@ -678,152 +666,34 @@ void throttle_vm_writeout(gfp_t gfp_mask)
}
/*
- * writeback at least _min_pages, and keep writing until the amount of dirty
- * memory is less than the background threshold, or until we're all clean.
- */
-static void background_writeout(unsigned long _min_pages)
-{
- long min_pages = _min_pages;
- struct writeback_control wbc = {
- .bdi = NULL,
- .sync_mode = WB_SYNC_NONE,
- .older_than_this = NULL,
- .nr_to_write = 0,
- .nonblocking = 1,
- .range_cyclic = 1,
- };
-
- for ( ; ; ) {
- unsigned long background_thresh;
- unsigned long dirty_thresh;
-
- get_dirty_limits(&background_thresh, &dirty_thresh, NULL, NULL);
- if (global_page_state(NR_FILE_DIRTY) +
- global_page_state(NR_UNSTABLE_NFS) < background_thresh
- && min_pages <= 0)
- break;
- wbc.more_io = 0;
- wbc.encountered_congestion = 0;
- wbc.nr_to_write = MAX_WRITEBACK_PAGES;
- wbc.pages_skipped = 0;
- writeback_inodes(&wbc);
- min_pages -= MAX_WRITEBACK_PAGES - wbc.nr_to_write;
- if (wbc.nr_to_write > 0 || wbc.pages_skipped > 0) {
- /* Wrote less than expected */
- if (wbc.encountered_congestion || wbc.more_io)
- congestion_wait(WRITE, HZ/10);
- else
- break;
- }
- }
-}
-
-/*
* Start writeback of `nr_pages' pages. If `nr_pages' is zero, write back
- * the whole world. Returns 0 if a pdflush thread was dispatched. Returns
- * -1 if all pdflush threads were busy.
+ * the whole world.
*/
-int wakeup_pdflush(long nr_pages)
+void wakeup_flusher_threads(long nr_pages)
{
if (nr_pages == 0)
nr_pages = global_page_state(NR_FILE_DIRTY) +
global_page_state(NR_UNSTABLE_NFS);
- return pdflush_operation(background_writeout, nr_pages);
+ bdi_writeback_all(NULL, nr_pages);
}
-static void wb_timer_fn(unsigned long unused);
static void laptop_timer_fn(unsigned long unused);
-static DEFINE_TIMER(wb_timer, wb_timer_fn, 0, 0);
static DEFINE_TIMER(laptop_mode_wb_timer, laptop_timer_fn, 0, 0);
/*
- * Periodic writeback of "old" data.
- *
- * Define "old": the first time one of an inode's pages is dirtied, we mark the
- * dirtying-time in the inode's address_space. So this periodic writeback code
- * just walks the superblock inode list, writing back any inodes which are
- * older than a specific point in time.
- *
- * Try to run once per dirty_writeback_interval. But if a writeback event
- * takes longer than a dirty_writeback_interval interval, then leave a
- * one-second gap.
- *
- * older_than_this takes precedence over nr_to_write. So we'll only write back
- * all dirty pages if they are all attached to "old" mappings.
- */
-static void wb_kupdate(unsigned long arg)
-{
- unsigned long oldest_jif;
- unsigned long start_jif;
- unsigned long next_jif;
- long nr_to_write;
- struct writeback_control wbc = {
- .bdi = NULL,
- .sync_mode = WB_SYNC_NONE,
- .older_than_this = &oldest_jif,
- .nr_to_write = 0,
- .nonblocking = 1,
- .for_kupdate = 1,
- .range_cyclic = 1,
- };
-
- sync_supers();
-
- oldest_jif = jiffies - msecs_to_jiffies(dirty_expire_interval * 10);
- start_jif = jiffies;
- next_jif = start_jif + msecs_to_jiffies(dirty_writeback_interval * 10);
- nr_to_write = global_page_state(NR_FILE_DIRTY) +
- global_page_state(NR_UNSTABLE_NFS) +
- (inodes_stat.nr_inodes - inodes_stat.nr_unused);
- while (nr_to_write > 0) {
- wbc.more_io = 0;
- wbc.encountered_congestion = 0;
- wbc.nr_to_write = MAX_WRITEBACK_PAGES;
- writeback_inodes(&wbc);
- if (wbc.nr_to_write > 0) {
- if (wbc.encountered_congestion || wbc.more_io)
- congestion_wait(WRITE, HZ/10);
- else
- break; /* All the old data is written */
- }
- nr_to_write -= MAX_WRITEBACK_PAGES - wbc.nr_to_write;
- }
- if (time_before(next_jif, jiffies + HZ))
- next_jif = jiffies + HZ;
- if (dirty_writeback_interval)
- mod_timer(&wb_timer, next_jif);
-}
-
-/*
* sysctl handler for /proc/sys/vm/dirty_writeback_centisecs
*/
int dirty_writeback_centisecs_handler(ctl_table *table, int write,
struct file *file, void __user *buffer, size_t *length, loff_t *ppos)
{
proc_dointvec(table, write, file, buffer, length, ppos);
- if (dirty_writeback_interval)
- mod_timer(&wb_timer, jiffies +
- msecs_to_jiffies(dirty_writeback_interval * 10));
- else
- del_timer(&wb_timer);
return 0;
}
-static void wb_timer_fn(unsigned long unused)
-{
- if (pdflush_operation(wb_kupdate, 0) < 0)
- mod_timer(&wb_timer, jiffies + HZ); /* delay 1 second */
-}
-
-static void laptop_flush(unsigned long unused)
-{
- sys_sync();
-}
-
static void laptop_timer_fn(unsigned long unused)
{
- pdflush_operation(laptop_flush, 0);
+ wakeup_flusher_threads(0);
}
/*
@@ -906,8 +776,6 @@ void __init page_writeback_init(void)
{
int shift;
- mod_timer(&wb_timer,
- jiffies + msecs_to_jiffies(dirty_writeback_interval * 10));
writeback_set_ratelimit();
register_cpu_notifier(&ratelimit_nb);
diff --git a/mm/pdflush.c b/mm/pdflush.c
deleted file mode 100644
index 235ac44..0000000
--- a/mm/pdflush.c
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- * mm/pdflush.c - worker threads for writing back filesystem data
- *
- * Copyright (C) 2002, Linus Torvalds.
- *
- * 09Apr2002 Andrew Morton
- * Initial version
- * 29Feb2004 kaos@sgi.com
- * Move worker thread creation to kthread to avoid chewing
- * up stack space with nested calls to kernel_thread.
- */
-
-#include <linux/sched.h>
-#include <linux/list.h>
-#include <linux/signal.h>
-#include <linux/spinlock.h>
-#include <linux/gfp.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/fs.h> /* Needed by writeback.h */
-#include <linux/writeback.h> /* Prototypes pdflush_operation() */
-#include <linux/kthread.h>
-#include <linux/cpuset.h>
-#include <linux/freezer.h>
-
-
-/*
- * Minimum and maximum number of pdflush instances
- */
-#define MIN_PDFLUSH_THREADS 2
-#define MAX_PDFLUSH_THREADS 8
-
-static void start_one_pdflush_thread(void);
-
-
-/*
- * The pdflush threads are worker threads for writing back dirty data.
- * Ideally, we'd like one thread per active disk spindle. But the disk
- * topology is very hard to divine at this level. Instead, we take
- * care in various places to prevent more than one pdflush thread from
- * performing writeback against a single filesystem. pdflush threads
- * have the PF_FLUSHER flag set in current->flags to aid in this.
- */
-
-/*
- * All the pdflush threads. Protected by pdflush_lock
- */
-static LIST_HEAD(pdflush_list);
-static DEFINE_SPINLOCK(pdflush_lock);
-
-/*
- * The count of currently-running pdflush threads. Protected
- * by pdflush_lock.
- *
- * Readable by sysctl, but not writable. Published to userspace at
- * /proc/sys/vm/nr_pdflush_threads.
- */
-int nr_pdflush_threads = 0;
-
-/*
- * The time at which the pdflush thread pool last went empty
- */
-static unsigned long last_empty_jifs;
-
-/*
- * The pdflush thread.
- *
- * Thread pool management algorithm:
- *
- * - The minimum and maximum number of pdflush instances are bound
- * by MIN_PDFLUSH_THREADS and MAX_PDFLUSH_THREADS.
- *
- * - If there have been no idle pdflush instances for 1 second, create
- * a new one.
- *
- * - If the least-recently-went-to-sleep pdflush thread has been asleep
- * for more than one second, terminate a thread.
- */
-
-/*
- * A structure for passing work to a pdflush thread. Also for passing
- * state information between pdflush threads. Protected by pdflush_lock.
- */
-struct pdflush_work {
- struct task_struct *who; /* The thread */
- void (*fn)(unsigned long); /* A callback function */
- unsigned long arg0; /* An argument to the callback */
- struct list_head list; /* On pdflush_list, when idle */
- unsigned long when_i_went_to_sleep;
-};
-
-static int __pdflush(struct pdflush_work *my_work)
-{
- current->flags |= PF_FLUSHER | PF_SWAPWRITE;
- set_freezable();
- my_work->fn = NULL;
- my_work->who = current;
- INIT_LIST_HEAD(&my_work->list);
-
- spin_lock_irq(&pdflush_lock);
- for ( ; ; ) {
- struct pdflush_work *pdf;
-
- set_current_state(TASK_INTERRUPTIBLE);
- list_move(&my_work->list, &pdflush_list);
- my_work->when_i_went_to_sleep = jiffies;
- spin_unlock_irq(&pdflush_lock);
- schedule();
- try_to_freeze();
- spin_lock_irq(&pdflush_lock);
- if (!list_empty(&my_work->list)) {
- /*
- * Someone woke us up, but without removing our control
- * structure from the global list. swsusp will do this
- * in try_to_freeze()->refrigerator(). Handle it.
- */
- my_work->fn = NULL;
- continue;
- }
- if (my_work->fn == NULL) {
- printk("pdflush: bogus wakeup\n");
- continue;
- }
- spin_unlock_irq(&pdflush_lock);
-
- (*my_work->fn)(my_work->arg0);
-
- spin_lock_irq(&pdflush_lock);
-
- /*
- * Thread creation: For how long have there been zero
- * available threads?
- *
- * To throttle creation, we reset last_empty_jifs.
- */
- if (time_after(jiffies, last_empty_jifs + 1 * HZ)) {
- if (list_empty(&pdflush_list)) {
- if (nr_pdflush_threads < MAX_PDFLUSH_THREADS) {
- last_empty_jifs = jiffies;
- nr_pdflush_threads++;
- spin_unlock_irq(&pdflush_lock);
- start_one_pdflush_thread();
- spin_lock_irq(&pdflush_lock);
- }
- }
- }
-
- my_work->fn = NULL;
-
- /*
- * Thread destruction: For how long has the sleepiest
- * thread slept?
- */
- if (list_empty(&pdflush_list))
- continue;
- if (nr_pdflush_threads <= MIN_PDFLUSH_THREADS)
- continue;
- pdf = list_entry(pdflush_list.prev, struct pdflush_work, list);
- if (time_after(jiffies, pdf->when_i_went_to_sleep + 1 * HZ)) {
- /* Limit exit rate */
- pdf->when_i_went_to_sleep = jiffies;
- break; /* exeunt */
- }
- }
- nr_pdflush_threads--;
- spin_unlock_irq(&pdflush_lock);
- return 0;
-}
-
-/*
- * Of course, my_work wants to be just a local in __pdflush(). It is
- * separated out in this manner to hopefully prevent the compiler from
- * performing unfortunate optimisations against the auto variables. Because
- * these are visible to other tasks and CPUs. (No problem has actually
- * been observed. This is just paranoia).
- */
-static int pdflush(void *dummy)
-{
- struct pdflush_work my_work;
- cpumask_var_t cpus_allowed;
-
- /*
- * Since the caller doesn't even check kthread_run() worked, let's not
- * freak out too much if this fails.
- */
- if (!alloc_cpumask_var(&cpus_allowed, GFP_KERNEL)) {
- printk(KERN_WARNING "pdflush failed to allocate cpumask\n");
- return 0;
- }
-
- /*
- * pdflush can spend a lot of time doing encryption via dm-crypt. We
- * don't want to do that at keventd's priority.
- */
- set_user_nice(current, 0);
-
- /*
- * Some configs put our parent kthread in a limited cpuset,
- * which kthread() overrides, forcing cpus_allowed == cpu_all_mask.
- * Our needs are more modest - cut back to our cpusets cpus_allowed.
- * This is needed as pdflush's are dynamically created and destroyed.
- * The boottime pdflush's are easily placed w/o these 2 lines.
- */
- cpuset_cpus_allowed(current, cpus_allowed);
- set_cpus_allowed_ptr(current, cpus_allowed);
- free_cpumask_var(cpus_allowed);
-
- return __pdflush(&my_work);
-}
-
-/*
- * Attempt to wake up a pdflush thread, and get it to do some work for you.
- * Returns zero if it indeed managed to find a worker thread, and passed your
- * payload to it.
- */
-int pdflush_operation(void (*fn)(unsigned long), unsigned long arg0)
-{
- unsigned long flags;
- int ret = 0;
-
- BUG_ON(fn == NULL); /* Hard to diagnose if it's deferred */
-
- spin_lock_irqsave(&pdflush_lock, flags);
- if (list_empty(&pdflush_list)) {
- ret = -1;
- } else {
- struct pdflush_work *pdf;
-
- pdf = list_entry(pdflush_list.next, struct pdflush_work, list);
- list_del_init(&pdf->list);
- if (list_empty(&pdflush_list))
- last_empty_jifs = jiffies;
- pdf->fn = fn;
- pdf->arg0 = arg0;
- wake_up_process(pdf->who);
- }
- spin_unlock_irqrestore(&pdflush_lock, flags);
-
- return ret;
-}
-
-static void start_one_pdflush_thread(void)
-{
- struct task_struct *k;
-
- k = kthread_run(pdflush, NULL, "pdflush");
- if (unlikely(IS_ERR(k))) {
- spin_lock_irq(&pdflush_lock);
- nr_pdflush_threads--;
- spin_unlock_irq(&pdflush_lock);
- }
-}
-
-static int __init pdflush_init(void)
-{
- int i;
-
- /*
- * Pre-set nr_pdflush_threads... If we fail to create,
- * the count will be decremented.
- */
- nr_pdflush_threads = MIN_PDFLUSH_THREADS;
-
- for (i = 0; i < MIN_PDFLUSH_THREADS; i++)
- start_one_pdflush_thread();
- return 0;
-}
-
-module_init(pdflush_init);
diff --git a/mm/swap_state.c b/mm/swap_state.c
index 3ecea98..323da00 100644
--- a/mm/swap_state.c
+++ b/mm/swap_state.c
@@ -34,6 +34,7 @@ static const struct address_space_operations swap_aops = {
};
static struct backing_dev_info swap_backing_dev_info = {
+ .name = "swap",
.capabilities = BDI_CAP_NO_ACCT_AND_WRITEBACK | BDI_CAP_SWAP_BACKED,
.unplug_io_fn = swap_unplug_io_fn,
};
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 5fa3eda..e37fd38 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1654,7 +1654,7 @@ static unsigned long do_try_to_free_pages(struct zonelist *zonelist,
*/
if (total_scanned > sc->swap_cluster_max +
sc->swap_cluster_max / 2) {
- wakeup_pdflush(laptop_mode ? 0 : total_scanned);
+ wakeup_flusher_threads(laptop_mode ? 0 : total_scanned);
sc->may_writepage = 1;
}
next prev parent reply other threads:[~2009-05-19 6:21 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-18 12:19 [PATCH 0/11] Per-bdi writeback flusher threads #4 Jens Axboe
2009-05-18 12:19 ` [PATCH 01/11] writeback: move dirty inodes from super_block to backing_dev_info Jens Axboe
2009-05-18 12:19 ` [PATCH 02/11] writeback: switch to per-bdi threads for flushing data Jens Axboe
2009-05-19 10:20 ` Richard Kennedy
2009-05-19 12:23 ` Jens Axboe
2009-05-19 13:45 ` Richard Kennedy
2009-05-19 17:56 ` Jens Axboe
2009-05-19 22:11 ` Peter Zijlstra
2009-05-20 11:18 ` Jan Kara
2009-05-20 11:32 ` Jens Axboe
2009-05-20 12:11 ` Jan Kara
2009-05-20 12:16 ` Jens Axboe
2009-05-20 12:24 ` Christoph Hellwig
2009-05-20 12:48 ` Jens Axboe
2009-05-20 12:37 ` Christoph Hellwig
2009-05-20 12:49 ` Jens Axboe
2009-05-20 14:02 ` Anton Altaparmakov
2009-05-20 14:02 ` Anton Altaparmakov
2009-05-18 12:19 ` [PATCH 03/11] writeback: get rid of pdflush completely Jens Axboe
2009-05-18 12:19 ` [PATCH 04/11] writeback: separate the flushing state/task from the bdi Jens Axboe
2009-05-20 11:34 ` Jan Kara
2009-05-20 11:39 ` Jens Axboe
2009-05-20 12:06 ` Jan Kara
2009-05-20 12:09 ` Jens Axboe
2009-05-18 12:19 ` [PATCH 05/11] writeback: support > 1 flusher thread per bdi Jens Axboe
2009-05-18 12:19 ` [PATCH 06/11] writeback: include default_backing_dev_info in writeback Jens Axboe
2009-05-18 12:19 ` [PATCH 07/11] writeback: allow sleepy exit of default writeback task Jens Axboe
2009-05-18 12:19 ` [PATCH 08/11] writeback: btrfs must register its backing_devices Jens Axboe
2009-05-18 12:19 ` [PATCH 09/11] writeback: add some debug inode list counters to bdi stats Jens Axboe
2009-05-18 12:19 ` [PATCH 10/11] writeback: add name to backing_dev_info Jens Axboe
2009-05-18 12:19 ` [PATCH 11/11] writeback: check for registered bdi in flusher add and inode dirty Jens Axboe
2009-05-19 6:11 ` [PATCH 0/11] Per-bdi writeback flusher threads #4 Zhang, Yanmin
2009-05-19 6:20 ` Jens Axboe [this message]
2009-05-19 6:43 ` Zhang, Yanmin
2009-05-20 7:51 ` Zhang, Yanmin
2009-05-20 7:51 ` Zhang, Yanmin
2009-05-20 8:09 ` Jens Axboe
2009-05-20 8:54 ` Jens Axboe
2009-05-20 9:19 ` Zhang, Yanmin
2009-05-20 9:25 ` Jens Axboe
2009-05-20 11:19 ` Jens Axboe
2009-05-21 6:33 ` Zhang, Yanmin
2009-05-21 9:10 ` Jan Kara
2009-05-22 1:28 ` Zhang, Yanmin
2009-05-22 8:15 ` Jens Axboe
2009-05-22 20:44 ` Jens Axboe
2009-05-23 19:15 ` Jens Axboe
2009-05-25 8:02 ` Zhang, Yanmin
2009-05-25 8:06 ` Jens Axboe
2009-05-25 8:43 ` Zhang, Yanmin
2009-05-25 8:48 ` Jens Axboe
2009-05-25 8:54 ` Zhang, Yanmin
2009-05-25 8:54 ` Zhang, Yanmin
2009-05-22 7:53 ` Jens Axboe
2009-05-22 7:53 ` Jens Axboe
2009-05-25 15:57 ` Richard Kennedy
2009-05-25 17:05 ` Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090519062049.GP4140@kernel.dk \
--to=jens.axboe@oracle.com \
--cc=akpm@linux-foundation.org \
--cc=chris.mason@oracle.com \
--cc=david@fromorbit.com \
--cc=hch@infradead.org \
--cc=jack@suse.cz \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=yanmin_zhang@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.