Re: EeePC 900 trackpad often not detected at boot in 2.6.30-rc4

[Sitsofe Wheeler <sitsofe@yahoo.com>]

On Tue, May 19, 2009 at 07:47:08PM -0700, Dmitry Torokhov wrote:
> 
> It is just unfortunate scheduling that messes us up:

The really frustrating thing is that for a time this was happening quite
consistently leading me to believe it was a kernel issue...

> > [    4.267050] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 1, 12) [113]
> > [    4.270440] drivers/input/serio/i8042.c: d4 -> i8042 (command) [116]
> > [    4.271016] drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [116]
> > [    4.274883] ALSA device list:
> > [    4.274963]   #0: HDA Intel at 0xf7eb8000 irq 16
> > [    4.275258] TCP cubic registered
> > [    4.276597] NET: Registered protocol family 17
> > [    4.276802] Using IPI Shortcut mode
> > [    4.279191]   Magic number: 9:810:70
> > [    4.279548] rtc_cmos 00:03: setting system clock to 2009-05-18 09:03:27 UTC (1242637407)
> > [    4.281412] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [127]
> > [    4.283338] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 1, 12) [129]
> > [    5.406620] libps2: errorneously fail 754 command
> 
> As you can see the device responded to our command and interrupt fired
> at 4.28 but for some reason the thread did not get woken up until 5.40,
> second and a half later... Crazy if you ask me.

It's worth noting that this kernel is stuffed full of debugging options
as is running on an EeePC 900 with 900Mhz Celeron. I am also using the
following boot parameters:

root=/dev/sdb2 cfg80211.ieee80211_regdom=GB usb_storage.delay_use=0
cfg80211 pcie_aspm=force pcie_aspm.policy=powersave fastboot ro
rootfstype=ext2

> In the meantime, the patch below should fix work around that delay.

This one could be tough to test unless there is a way of forcing the
awkward scheduling...

-- 
Sitsofe | http://sucs.org/~sits/