From: "Rogério Brito" <rbrito@ime.usp.br>
To: Alan Stern <stern@rowland.harvard.edu>
Cc: Robert Hancock <hancockrwd@gmail.com>,
linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org
Subject: Re: [2.6.30-rc2] usb reset during big file transfer and ext3 error
Date: Sun, 24 May 2009 13:11:14 -0300 [thread overview]
Message-ID: <20090524161114.GA2667@ime.usp.br> (raw)
In-Reply-To: <Pine.LNX.4.44L0.0905241035380.7718-100000@netrider.rowland.org>
[-- Attachment #1: Type: text/plain, Size: 4172 bytes --]
On May 24 2009, Alan Stern wrote:
> It is abnormal, but I can't tell what the reason is without more
> information. You should try using usbmon (see
> Documentation/usb/usbmon.txt) to trace these events.
Here you go with a log that is pure text (compressed). The part of dmesg
relative to the USB plugging is here:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
[ 248.286615] usb-storage: device found at 3
[ 248.286620] usb-storage: waiting for device to settle before scanning
[ 248.286631] usbcore: registered new interface driver usb-storage
[ 248.286636] USB Mass Storage support registered.
[ 248.351740] usb 4-2.2: New USB device found, idVendor=067b, idProduct=2316
[ 248.351749] usb 4-2.2: New USB device strings: Mfr=1, Product=5, SerialNumber=0
[ 248.351753] usb 4-2.2: Product: USB Security Device
[ 248.351756] usb 4-2.2: Manufacturer: Leading Driver Co.,LTD.
[ 248.351860] PM: Adding info for usb:4-2.2
[ 248.351907] usb 4-2.2: configuration #1 chosen from 1 choice
[ 248.354759] PM: Adding info for usb:4-2.2:1.0
[ 248.354894] PM: Adding info for No Bus:usbdev4.4_ep00
[ 253.288125] usb-storage: device scan complete
[ 253.291081] scsi 0:0:0:0: Direct-Access Prolific USB Flash Disk 1.00 PQ: 0 ANSI: 0 CCS
[ 253.291476] PM: Adding info for scsi:target0:0:0
[ 253.291903] PM: Adding info for scsi:0:0:0:0
[ 253.292167] PM: Adding info for No Bus:0:0:0:0
[ 253.331140] Driver 'sd' needs updating - please use bus_type methods
[ 253.331290] PM: Adding info for No Bus:0:0:0:0
[ 253.337069] sd 0:0:0:0: [sda] 256000 512-byte hardware sectors: (131 MB/125 MiB)
[ 253.340068] sd 0:0:0:0: [sda] Write Protect is off
[ 253.340073] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 253.340077] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 253.340130] PM: Adding info for No Bus:sda
[ 253.347047] sd 0:0:0:0: ioctl_internal_command return code = 8000002
[ 253.347053] : Sense Key : 0x0 [current]
[ 253.347059] : ASC=0x0 ASCQ=0x0
[ 253.355049] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 253.355057] sda: sda1
[ 253.361106] PM: Adding info for No Bus:sda1
[ 253.366054] sd 0:0:0:0: ioctl_internal_command return code = 8000002
[ 253.366060] : Sense Key : 0x0 [current]
[ 253.366066] : ASC=0x0 ASCQ=0x0
[ 253.366162] PM: Adding info for No Bus:8:0
[ 253.366196] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 253.386056] sd 0:0:0:0: ioctl_internal_command return code = 8000002
[ 253.386063] : Sense Key : 0x0 [current]
[ 253.386069] : ASC=0x0 ASCQ=0x0
[ 253.690947] sd 0:0:0:0: ioctl_internal_command return code = 8000002
[ 253.690954] : Sense Key : 0x0 [current]
[ 253.690960] : ASC=0x0 ASCQ=0x0
[ 253.784900] sd 0:0:0:0: ioctl_internal_command return code = 8000002
[ 253.784909] : Sense Key : 0x0 [current]
[ 253.784916] : ASC=0x0 ASCQ=0x0
[ 253.806909] sd 0:0:0:0: ioctl_internal_command return code = 8000002
[ 253.806914] : Sense Key : 0x0 [current]
[ 253.806919] : ASC=0x0 ASCQ=0x0
[ 253.816898] sd 0:0:0:0: ioctl_internal_command return code = 8000002
[ 253.816904] : Sense Key : 0x0 [current]
[ 253.816910] : ASC=0x0 ASCQ=0x0
[ 254.118799] sd 0:0:0:0: ioctl_internal_command return code = 8000002
[ 254.118806] : Sense Key : 0x0 [current]
[ 254.118812] : ASC=0x0 ASCQ=0x0
[ 254.128798] sd 0:0:0:0: ioctl_internal_command return code = 8000002
[ 254.128804] : Sense Key : 0x0 [current]
[ 254.128810] : ASC=0x0 ASCQ=0x0
[ 254.432691] sd 0:0:0:0: ioctl_internal_command return code = 8000002
[ 254.432697] : Sense Key : 0x0 [current]
[ 254.432703] : ASC=0x0 ASCQ=0x0
[ 254.495644] sd 0:0:0:0: ioctl_internal_command return code = 8000002
[ 254.495650] : Sense Key : 0x0 [current]
[ 254.495656] : ASC=0x0 ASCQ=0x0
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
If you need further information, please let me know.
Thanks,
--
Rogério Brito : rbrito@{mackenzie,ime.usp}.br : GPG key 1024D/7C2CAEB8
http://www.ime.usp.br/~rbrito : http://meusite.mackenzie.com.br/rbrito
Projects: algorithms.berlios.de : lame.sf.net : vrms.alioth.debian.org
[-- Attachment #2: 1.mon.out.bz2 --]
[-- Type: application/octet-stream, Size: 12307 bytes --]
next prev parent reply other threads:[~2009-05-24 16:11 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-21 11:10 [2.6.30-rc2] usb reset during big file transfer and ext3 error Rogério Brito
2009-04-22 0:34 ` Robert Hancock
2009-04-22 22:06 ` Rogério Brito
2009-04-23 2:53 ` Alan Stern
2009-05-01 9:15 ` Rogério Brito
2009-05-01 19:16 ` Alan Stern
2009-05-24 7:16 ` Rogério Brito
2009-05-24 14:40 ` Alan Stern
2009-05-24 15:32 ` ioctl_internal_command messages (was: Re: [2.6.30-rc2] usb reset during big file transfer and ext3 error) Rogério Brito
2009-05-24 16:11 ` Rogério Brito [this message]
2009-05-25 2:34 ` [2.6.30-rc2] usb reset during big file transfer and ext3 error Alan Stern
2009-05-25 15:13 ` [PATCH] usb-storage: include USB drive in unusual_devs list Rogério Brito
2009-05-25 21:03 ` Alan Stern
2009-05-25 21:41 ` Rogério Brito
2009-08-01 18:30 ` Rogério Brito
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090524161114.GA2667@ime.usp.br \
--to=rbrito@ime.usp.br \
--cc=hancockrwd@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.