[U-Boot] [PATCH v10] Marvell Kirkwood family SOC support

[Stefan Roese <sr@denx.de>]

On Tuesday 26 May 2009 09:28:29 Prafulla Wadaskar wrote:
> > Do you also have a NAND driver for Kirkwood in your queue?
> > I'm asking since I need NAND support for my custom board. If
> > you don't have any I will port the one from the 1.1.4 Marvell
> > version to mainline.
>
> Hi Stefan
> No need, NAND support is already mainlined in u-boot, you just need to use
> it I have used it for Sheevaplug board support please see the patch
> http://lists.denx.de/pipermail/u-boot/2009-May/053158.html

I know that NAND support is generally available in U-Boot. But what's 
currently missing is the platform/board specific driver for Kirkwood. Seems 
that you included the Kirkwood NAND driver into your Sheevaplug support patch. 
Good. But this driver should be placed in drivers/mtd/nand so that other 
Kirkwood boards can use it as well.

So could you please split this Sheevaplug patch and submit the NAND driver in 
a separate patch (CC to Scott Wood as NAND custodian)?

Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================