From: "Rafael J. Wysocki" <rjw@sisk.pl>
To: Pascal Terjan <pterjan@mandriva.com>
Cc: linux-kernel@vger.kernel.org, stable <stable@kernel.org>,
Yinghai Lu <yinghai@kernel.org>, Greg KH <gregkh@suse.de>,
Andrew Morton <akpm@linux-foundation.org>
Subject: Re: Stable regression 2.6.29.3 vs 2.6.29.2
Date: Fri, 29 May 2009 21:47:04 +0200 [thread overview]
Message-ID: <200905292147.05395.rjw@sisk.pl> (raw)
In-Reply-To: <1243625720.4426.0.camel@plop>
On Friday 29 May 2009, Pascal Terjan wrote:
> (Resending because of wrong To:, sorry for the duplicate)
>
> We have a machine here where hard disk is no longer detected at boot
> time with 2.6.29.3 (it happens only on kernels with HIGHMEM4G + PAE and
> not on the same one with HIGHMEM64G).
>
> Motherboard is ECS PF22 Extreme
>
> bisect blames this commit:
>
> http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.29.y.git;a=commit;h=3b442bfc78d351343fa539c63afde75d7b134316
Would it be possible to check if the current mainline works correctly?
Rafael
> lspci -vvv:
>
> 00:00.0 Host bridge: Intel Corporation 82955X Memory Controller Hub (rev
> 81)
> Subsystem: Elitegroup Computer Systems Device 1b75
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort+ >SERR- <PERR- INTx-
> Latency: 0
> Capabilities: <access denied>
>
> 00:01.0 PCI bridge: Intel Corporation 82955X PCI Express Root Port (rev
> 81) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> I/O behind bridge: 00009000-00009fff
> Memory behind bridge: f7e00000-fdefffff
> Prefetchable memory behind bridge: 00000000aff00000-00000000efefffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport-driver
> Kernel modules: shpchp
>
> 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
> Definition Audio Controller (rev 01)
> Subsystem: Elitegroup Computer Systems Device 1b75
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at febf8000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: <access denied>
> Kernel driver in use: HDA Intel
> Kernel modules: snd-hda-intel
>
> 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
> Port 1 (rev 01) (prog-if 00 [Normal decode])
> Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: fff00000-000fffff
> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport-driver
> Kernel modules: shpchp
>
> 00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI
> Express Port 5 (rev 01) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
> I/O behind bridge: 0000a000-0000afff
> Memory behind bridge: fdf00000-fe7fffff
> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport-driver
> Kernel modules: shpchp
>
> 00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI
> Express Port 6 (rev 01) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
> I/O behind bridge: 0000b000-0000bfff
> Memory behind bridge: fe800000-fe9fffff
> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport-driver
> Kernel modules: shpchp
>
> 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
> Controller #1 (rev 01) (prog-if 00 [UHCI])
> Subsystem: Elitegroup Computer Systems Device 1b75
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 23
> Region 4: I/O ports at e080 [size=32]
> Kernel driver in use: uhci_hcd
> Kernel modules: uhci-hcd
>
> 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
> Controller #2 (rev 01) (prog-if 00 [UHCI])
> Subsystem: Elitegroup Computer Systems Device 1b75
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 19
> Region 4: I/O ports at e000 [size=32]
> Kernel driver in use: uhci_hcd
> Kernel modules: uhci-hcd
>
> 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
> Controller #3 (rev 01) (prog-if 00 [UHCI])
> Subsystem: Elitegroup Computer Systems Device 1b75
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin C routed to IRQ 18
> Region 4: I/O ports at dc00 [size=32]
> Kernel driver in use: uhci_hcd
> Kernel modules: uhci-hcd
>
> 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
> Controller #4 (rev 01) (prog-if 00 [UHCI])
> Subsystem: Elitegroup Computer Systems Device 1b75
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin D routed to IRQ 16
> Region 4: I/O ports at d880 [size=32]
> Kernel driver in use: uhci_hcd
> Kernel modules: uhci-hcd
>
> 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
> Controller (rev 01) (prog-if 20 [EHCI])
> Subsystem: Elitegroup Computer Systems Device 1b75
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 23
> Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=1K]
> Capabilities: <access denied>
> Kernel driver in use: ehci_hcd
> Kernel modules: ehci-hcd
>
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if
> 01 [Subtractive decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
> I/O behind bridge: 0000c000-0000cfff
> Memory behind bridge: fea00000-feafffff
> Prefetchable memory behind bridge: 0000000030000000-00000000300fffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
>
> 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC
> Interface Bridge (rev 01)
> Subsystem: Elitegroup Computer Systems Device 1b75
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Capabilities: <access denied>
> Kernel modules: iTCO_wdt, intel-rng
>
> 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE
> Controller (rev 01) (prog-if 8a [Master SecP PriP])
> Subsystem: Elitegroup Computer Systems Device 1b75
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 18
> Region 0: I/O ports at 01f0 [size=8]
> Region 1: I/O ports at 03f4 [size=1]
> Region 2: I/O ports at 0170 [size=8]
> Region 3: I/O ports at 0374 [size=1]
> Region 4: I/O ports at ffa0 [size=16]
> Kernel driver in use: ata_piix
> Kernel modules: ata_piix, piix
>
> 00:1f.2 SATA controller: Intel Corporation 82801GR/GH (ICH7 Family) SATA
> AHCI Controller (rev 01) (prog-if 01 [AHCI 1.0])
> Subsystem: Elitegroup Computer Systems Device 1b75
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 28
> Region 0: I/O ports at ec00 [size=8]
> Region 1: I/O ports at e880 [size=4]
> Region 2: I/O ports at e800 [size=8]
> Region 3: I/O ports at e480 [size=4]
> Region 4: I/O ports at e400 [size=32]
> Region 5: Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
> Capabilities: <access denied>
> Kernel driver in use: ahci
> Kernel modules: ahci
>
> 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller
> (rev 01)
> Subsystem: Elitegroup Computer Systems Device 1b75
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin B routed to IRQ 19
> Region 4: I/O ports at 0400 [size=32]
> Kernel driver in use: i801_smbus
> Kernel modules: i2c-i801
>
> 01:00.0 VGA compatible controller: nVidia Corporation GeForce 9500 GT
> (rev a1) (prog-if 00 [VGA controller])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 10
> Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
> Region 1: Memory at c0000000 (64-bit, prefetchable) [size=512M]
> Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
> Region 5: I/O ports at 9c00 [size=128]
> Expansion ROM at fde80000 [disabled] [size=512K]
> Capabilities: <access denied>
> Kernel modules: nvidiafb
>
> 03:00.0 Ethernet controller: Intel Corporation 82573V Gigabit Ethernet
> Controller (Copper) (rev 03)
> Subsystem: Intel Corporation Device 0000
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 29
> Region 0: Memory at fe7e0000 (32-bit, non-prefetchable) [size=128K]
> Region 1: Memory at fe000000 (32-bit, non-prefetchable) [size=4M]
> Region 2: I/O ports at ac00 [size=32]
> Capabilities: <access denied>
> Kernel driver in use: e1000e
> Kernel modules: e1000e
>
> 04:00.0 RAID bus controller: Silicon Image, Inc. SiI 3132 Serial ATA
> Raid II Controller (rev 01)
> Subsystem: Elitegroup Computer Systems Device 5308
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 17
> Region 0: Memory at fe9ffc00 (64-bit, non-prefetchable) [size=128]
> Region 2: Memory at fe9f8000 (64-bit, non-prefetchable) [size=16K]
> Region 4: I/O ports at bc00 [size=128]
> Expansion ROM at fe900000 [disabled] [size=512K]
> Capabilities: <access denied>
> Kernel driver in use: sata_sil24
> Kernel modules: sata_sil24
>
> 05:04.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306 Fire II IEEE
> 1394 OHCI Link Layer Controller (rev 80) (prog-if 10 [OHCI])
> Subsystem: VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link
> Layer Controller
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (8000ns max), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 22
> Region 0: Memory at feaff800 (32-bit, non-prefetchable) [size=2K]
> Region 1: I/O ports at cc00 [size=128]
> Capabilities: <access denied>
> Kernel driver in use: ohci1394
> Kernel modules: ohci1394
>
> 05:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169
> Gigabit Ethernet (rev 10)
> Subsystem: Elitegroup Computer Systems Device 1853
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 21
> Region 0: I/O ports at c800 [size=256]
> Region 1: Memory at feaff400 (32-bit, non-prefetchable) [size=256]
> Expansion ROM at 30000000 [disabled] [size=128K]
> Capabilities: <access denied>
> Kernel driver in use: r8169
> Kernel modules: r8169
next prev parent reply other threads:[~2009-05-29 19:47 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-29 19:35 Stable regression 2.6.29.3 vs 2.6.29.2 Pascal Terjan
2009-05-29 19:47 ` Rafael J. Wysocki [this message]
2009-05-29 19:54 ` Pascal Terjan
2009-05-29 21:32 ` Rafael J. Wysocki
2009-06-02 13:26 ` Pascal Terjan
2009-05-29 19:48 ` Yinghai Lu
2009-06-02 13:28 ` Pascal Terjan
2009-06-02 17:24 ` Yinghai Lu
2009-06-02 19:09 ` Pascal Terjan
2009-06-02 20:44 ` Yinghai Lu
2009-06-02 22:51 ` Pascal Terjan
2009-06-02 22:54 ` Yinghai Lu
2009-06-03 9:27 ` Pascal Terjan
2009-06-03 7:13 ` [PATCH] x86/pci: fix mmconfig detection with 32bit near 4g Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200905292147.05395.rjw@sisk.pl \
--to=rjw@sisk.pl \
--cc=akpm@linux-foundation.org \
--cc=gregkh@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=pterjan@mandriva.com \
--cc=stable@kernel.org \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.