From mboxrd@z Thu Jan  1 00:00:00 1970
From: Luis R. Rodriguez <lrodriguez@atheros.com>
Date: Tue, 2 Jun 2009 11:15:45 -0700
Subject: [ath9k-devel] Does DWA-642 AR5008 support 80211n?
In-Reply-To: <439703.25114.qm@web57906.mail.re3.yahoo.com>
References: <439703.25114.qm@web57906.mail.re3.yahoo.com>
Message-ID: <20090602181545.GB11052@tesla>
List-Id: <ath9k-devel.lists.ath9k.org>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: ath9k-devel@lists.ath9k.org

On Tue, Jun 02, 2009 at 11:06:50AM -0700, hong zhang wrote:
> 
> I am using CISCO 1250 AP that is 802.11n.
> It works fine with Intel chip.
> Actually, DWA642 can associate wit 802.11g.

You mean the same card can associate to the same AP if
11n is disabled?

> Here is dmesg:

I take it this is the log with 11n enabled?

> [59021.835466] wlan3: associate with AP 00:17:df:a6:e7:30
> [59021.849286] wlan3: RX ReassocResp from 00:17:df:a6:e7:30 (capab=0x421 status=0 aid=1)
> [59021.849293] wlan3: associated
> [59021.855104] wlan3: disassociating by local choice (reason=3)
> [59022.677330] wlan3: authenticate with AP 00:17:df:a6:e7:30
> [59022.878101] wlan3: authenticate with AP 00:17:df:a6:e7:30
> [59022.880030] wlan3: authenticated
> [59022.880037] wlan3: associate with AP 00:17:df:a6:e7:30
> [59022.892490] wlan3: RX ReassocResp from 00:17:df:a6:e7:30 (capab=0x421 status=0 aid=3)
> [59022.892497] wlan3: associated
> [59022.898604] wlan3: disassociating by local choice (reason=3)
> 
> wpa_supplicant message:
> 
> Setting scan request: 5 sec 0 usec
> RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
> RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan3' added
> 
> Cancelling scan request
> WPA: clearing own WPA/RSN IE
> Automatic auth_alg selection: 0x1
> WPA: clearing AP WPA IE
> WPA: clearing AP RSN IE
> WPA: clearing own WPA/RSN IE
> No keys have been configured - skip key clearing

And encryption is disabled?

  Luis