[U-Boot] [PATCH 2/2] KB9202: Add NAND support

[Stefan Roese <sr@denx.de>]

On Wednesday 03 June 2009 19:42:00 Matthias Kaehlcke wrote:

<snip>

> here is a version of the patch that addresses the issues you pointed
> out. sorry for the late response, my development system died and i
> needed some time to get a new machine and restore the setup
>
> --
>
> This is a forward port of the patch submitted by Christian from
> Kwikbyte in 06/2007
> (http://lists.denx.de/pipermail/u-boot/2007-June/022068.html)
>
> Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
> ---
>  board/kb9202/Makefile    |    2 +-
>  board/kb9202/nand.c      |  153
> ++++++++++++++++++++++++++++++++++++++++++++++ include/configs/kb9202.h |  
> 10 +++-
>  3 files changed, 163 insertions(+), 2 deletions(-)
>  create mode 100644 board/kb9202/nand.c

I suggest to move this driver to drivers/mtd/nand instead.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================