All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Subject: [PATCH] ide: re-implement ide_pci_init_one() on top of ide_pci_init_two()
Date: Mon, 8 Jun 2009 22:24:56 +0200	[thread overview]
Message-ID: <200906082224.56438.bzolnier@gmail.com> (raw)


There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
against ide-2.6.git/for-next

 drivers/ide/setup-pci.c |   70 ++++++++++--------------------------------------
 1 file changed, 16 insertions(+), 54 deletions(-)

Index: b/drivers/ide/setup-pci.c
===================================================================
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -1,7 +1,7 @@
 /*
  *  Copyright (C) 1998-2000  Andre Hedrick <andre@linux-ide.org>
  *  Copyright (C) 1995-1998  Mark Lord
- *  Copyright (C)      2007  Bartlomiej Zolnierkiewicz
+ *  Copyright (C) 2007-2009  Bartlomiej Zolnierkiewicz
  *
  *  May be copied or modified under the terms of the GNU General Public License
  */
@@ -534,61 +534,15 @@ out:
 	return ret;
 }
 
-int ide_pci_init_one(struct pci_dev *dev, const struct ide_port_info *d,
-		     void *priv)
-{
-	struct ide_host *host;
-	struct ide_hw hw[2], *hws[] = { NULL, NULL };
-	int ret;
-
-	ret = ide_setup_pci_controller(dev, d, 1);
-	if (ret < 0)
-		goto out;
-
-	ide_pci_setup_ports(dev, d, &hw[0], &hws[0]);
-
-	host = ide_host_alloc(d, hws, 2);
-	if (host == NULL) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	host->dev[0] = &dev->dev;
-
-	host->host_priv = priv;
-
-	host->irq_flags = IRQF_SHARED;
-
-	pci_set_drvdata(dev, host);
-
-	ret = do_ide_setup_pci_device(dev, d, 1);
-	if (ret < 0)
-		goto out;
-
-	/* fixup IRQ */
-	if (ide_pci_is_in_compatibility_mode(dev)) {
-		hw[0].irq = pci_get_legacy_ide_irq(dev, 0);
-		hw[1].irq = pci_get_legacy_ide_irq(dev, 1);
-	} else
-		hw[1].irq = hw[0].irq = ret;
-
-	ret = ide_host_register(host, d, hws);
-	if (ret)
-		ide_host_free(host);
-out:
-	return ret;
-}
-EXPORT_SYMBOL_GPL(ide_pci_init_one);
-
 int ide_pci_init_two(struct pci_dev *dev1, struct pci_dev *dev2,
 		     const struct ide_port_info *d, void *priv)
 {
 	struct pci_dev *pdev[] = { dev1, dev2 };
 	struct ide_host *host;
-	int ret, i;
+	int ret, i, n_ports = dev2 ? 4 : 2;
 	struct ide_hw hw[4], *hws[] = { NULL, NULL, NULL, NULL };
 
-	for (i = 0; i < 2; i++) {
+	for (i = 0; i < n_ports / 2; i++) {
 		ret = ide_setup_pci_controller(pdev[i], d, !i);
 		if (ret < 0)
 			goto out;
@@ -596,23 +550,24 @@ int ide_pci_init_two(struct pci_dev *dev
 		ide_pci_setup_ports(pdev[i], d, &hw[i*2], &hws[i*2]);
 	}
 
-	host = ide_host_alloc(d, hws, 4);
+	host = ide_host_alloc(d, hws, n_ports);
 	if (host == NULL) {
 		ret = -ENOMEM;
 		goto out;
 	}
 
 	host->dev[0] = &dev1->dev;
-	host->dev[1] = &dev2->dev;
+	if (dev2)
+		host->dev[1] = &dev2->dev;
 
 	host->host_priv = priv;
-
 	host->irq_flags = IRQF_SHARED;
 
 	pci_set_drvdata(pdev[0], host);
-	pci_set_drvdata(pdev[1], host);
+	if (dev2)
+		pci_set_drvdata(pdev[1], host);
 
-	for (i = 0; i < 2; i++) {
+	for (i = 0; i < n_ports / 2; i++) {
 		ret = do_ide_setup_pci_device(pdev[i], d, !i);
 
 		/*
@@ -638,6 +593,13 @@ out:
 }
 EXPORT_SYMBOL_GPL(ide_pci_init_two);
 
+int ide_pci_init_one(struct pci_dev *dev, const struct ide_port_info *d,
+		     void *priv)
+{
+	return ide_pci_init_two(dev, NULL, d, priv);
+}
+EXPORT_SYMBOL_GPL(ide_pci_init_one);
+
 void ide_pci_remove(struct pci_dev *dev)
 {
 	struct ide_host *host = pci_get_drvdata(dev);

             reply	other threads:[~2009-06-08 20:33 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-06-08 20:24 Bartlomiej Zolnierkiewicz [this message]
2009-06-09 11:56 ` [PATCH] ide: re-implement ide_pci_init_one() on top of ide_pci_init_two() Sergei Shtylyov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200906082224.56438.bzolnier@gmail.com \
    --to=bzolnier@gmail.com \
    --cc=linux-ide@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.