From: "K.Prasad" <prasad@linux.vnet.ibm.com>
To: David Gibson <dwg@au1.ibm.com>, linuxppc-dev@ozlabs.org
Cc: Michael Neuling <mikey@neuling.org>,
Benjamin Herrenschmidt <benh@au1.ibm.com>,
paulus@samba.org, Alan Stern <stern@rowland.harvard.edu>,
"K.Prasad" <prasad@linux.vnet.ibm.com>,
Roland McGrath <roland@redhat.com>
Subject: [Patch 4/6] Modify process and processor handling code to recognise hardware debug registers
Date: Wed, 10 Jun 2009 14:38:18 +0530 [thread overview]
Message-ID: <20090610090818.GE14478@in.ibm.com> (raw)
In-Reply-To: 20090610090316.898961359@prasadkr_t60p.in.ibm.com
Modify process handling code to recognise hardware debug registers during copy
and flush operations. Introduce a new TIF_DEBUG task flag to indicate a
process's use of debug register. Load the debug register values into a
new CPU during initialisation.
Signed-off-by: K.Prasad <prasad@linux.vnet.ibm.com>
---
arch/powerpc/kernel/process.c | 15 +++++++++++++++
arch/powerpc/kernel/smp.c | 2 ++
2 files changed, 17 insertions(+)
Index: linux-2.6-tip.hbkpt/arch/powerpc/kernel/process.c
===================================================================
--- linux-2.6-tip.hbkpt.orig/arch/powerpc/kernel/process.c
+++ linux-2.6-tip.hbkpt/arch/powerpc/kernel/process.c
@@ -50,6 +50,7 @@
#include <asm/syscalls.h>
#ifdef CONFIG_PPC64
#include <asm/firmware.h>
+#include <asm/hw_breakpoint.h>
#endif
#include <linux/kprobes.h>
#include <linux/kdebug.h>
@@ -254,8 +255,10 @@ void do_dabr(struct pt_regs *regs, unsig
11, SIGSEGV) == NOTIFY_STOP)
return;
+#ifndef CONFIG_PPC64
if (debugger_dabr_match(regs))
return;
+#endif
/* Clear the DAC and struct entries. One shot trigger */
#if defined(CONFIG_BOOKE)
@@ -372,8 +375,13 @@ struct task_struct *__switch_to(struct t
#endif /* CONFIG_SMP */
+#ifdef CONFIG_PPC64
+ if (unlikely(test_tsk_thread_flag(new, TIF_DEBUG)))
+ arch_install_thread_hw_breakpoint(new);
+#else
if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr))
set_dabr(new->thread.dabr);
+#endif /* CONFIG_PPC64 */
#if defined(CONFIG_BOOKE)
/* If new thread DAC (HW breakpoint) is the same then leave it */
@@ -550,6 +558,10 @@ void show_regs(struct pt_regs * regs)
void exit_thread(void)
{
discard_lazy_cpu_state();
+#ifdef CONFIG_PPC64
+ if (unlikely(test_tsk_thread_flag(current, TIF_DEBUG)))
+ flush_thread_hw_breakpoint(current);
+#endif /* CONFIG_PPC64 */
}
void flush_thread(void)
@@ -672,6 +684,9 @@ int copy_thread(unsigned long clone_flag
* function.
*/
kregs->nip = *((unsigned long *)ret_from_fork);
+
+ if (unlikely(test_tsk_thread_flag(current, TIF_DEBUG)))
+ copy_thread_hw_breakpoint(current, p, clone_flags);
#else
kregs->nip = (unsigned long)ret_from_fork;
#endif
Index: linux-2.6-tip.hbkpt/arch/powerpc/kernel/smp.c
===================================================================
--- linux-2.6-tip.hbkpt.orig/arch/powerpc/kernel/smp.c
+++ linux-2.6-tip.hbkpt/arch/powerpc/kernel/smp.c
@@ -48,6 +48,7 @@
#include <asm/vdso_datapage.h>
#ifdef CONFIG_PPC64
#include <asm/paca.h>
+#include <asm/hw_breakpoint.h>
#endif
#ifdef DEBUG
@@ -536,6 +537,7 @@ int __devinit start_secondary(void *unus
local_irq_enable();
+ load_debug_registers();
cpu_idle();
return 0;
}
next prev parent reply other threads:[~2009-06-10 9:08 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20090610090316.898961359@prasadkr_t60p.in.ibm.com>
2009-06-10 9:08 ` [Patch 1/6] Prepare the PowerPC platform for HW Breakpoint infrastructure K.Prasad
2009-06-10 9:08 ` [Patch 2/6] Introduce PPC64 specific Hardware Breakpoint interfaces K.Prasad
2009-06-17 4:32 ` David Gibson
2009-06-18 18:20 ` K.Prasad
2009-06-19 5:04 ` David Gibson
2009-07-03 8:11 ` K.Prasad
2009-06-10 9:08 ` [Patch 3/6] Modify ptrace code to use " K.Prasad
2009-06-10 9:08 ` K.Prasad [this message]
2009-06-17 4:14 ` [Patch 4/6] Modify process and processor handling code to recognise hardware debug registers David Gibson
2009-06-18 17:56 ` K.Prasad
2009-06-19 4:57 ` David Gibson
2009-06-10 9:08 ` [Patch 5/6] Modify Data storage exception code to recognise DABR match first K.Prasad
2009-06-17 4:13 ` David Gibson
2009-06-10 9:08 ` [Patch 6/6] Adapt kexec and samples code to recognise PPC64 hardware breakpoint usage K.Prasad
[not found] <20090726235854.574539012@prasadkr_t60p.in.ibm.com>
2009-07-27 0:18 ` [Patch 4/6] Modify process and processor handling code to recognise hardware debug registers K.Prasad
[not found] <20090603162741.197115376@prasadkr_t60p.in.ibm.com>
2009-06-03 16:35 ` K.Prasad
[not found] <20090525004730.944465878@prasadkr_t60p.in.ibm.com>
2009-05-25 1:16 ` K.Prasad
2009-05-29 4:29 ` David Gibson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090610090818.GE14478@in.ibm.com \
--to=prasad@linux.vnet.ibm.com \
--cc=benh@au1.ibm.com \
--cc=dwg@au1.ibm.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=mikey@neuling.org \
--cc=paulus@samba.org \
--cc=roland@redhat.com \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.