From: Kalle Valo <kalle.valo@iki.fi>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH 24/33] wl12xx: Use chipset specific join commands
Date: Fri, 12 Jun 2009 14:16:52 +0300 [thread overview]
Message-ID: <20090612111652.8877.59676.stgit@tikku> (raw)
In-Reply-To: <20090612110225.8877.92418.stgit@tikku>
From: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Add implementation to use chipset specific join commands.
Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
---
drivers/net/wireless/wl12xx/cmd.c | 2 +-
drivers/net/wireless/wl12xx/cmd.h | 2 +-
drivers/net/wireless/wl12xx/main.c | 9 +++++----
drivers/net/wireless/wl12xx/wl1251.c | 1 +
drivers/net/wireless/wl12xx/wl12xx.h | 2 ++
5 files changed, 10 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/wl12xx/cmd.c b/drivers/net/wireless/wl12xx/cmd.c
index fb4e996..cad258d 100644
--- a/drivers/net/wireless/wl12xx/cmd.c
+++ b/drivers/net/wireless/wl12xx/cmd.c
@@ -253,7 +253,7 @@ out:
return ret;
}
-int wl12xx_cmd_join(struct wl12xx *wl, u8 bss_type, u8 dtim_interval,
+int wl1251_cmd_join(struct wl12xx *wl, u8 bss_type, u8 dtim_interval,
u16 beacon_interval, u8 wait)
{
unsigned long timeout;
diff --git a/drivers/net/wireless/wl12xx/cmd.h b/drivers/net/wireless/wl12xx/cmd.h
index 7aef1f2..a2eae54 100644
--- a/drivers/net/wireless/wl12xx/cmd.h
+++ b/drivers/net/wireless/wl12xx/cmd.h
@@ -36,7 +36,7 @@ int wl12xx_cmd_configure(struct wl12xx *wl, u16 id, void *buf, size_t len);
int wl12xx_cmd_vbm(struct wl12xx *wl, u8 identity,
void *bitmap, u16 bitmap_len, u8 bitmap_control);
int wl12xx_cmd_data_path(struct wl12xx *wl, u8 channel, bool enable);
-int wl12xx_cmd_join(struct wl12xx *wl, u8 bss_type, u8 dtim_interval,
+int wl1251_cmd_join(struct wl12xx *wl, u8 bss_type, u8 dtim_interval,
u16 beacon_interval, u8 wait);
int wl12xx_cmd_ps_mode(struct wl12xx *wl, u8 ps_mode);
int wl12xx_cmd_read_memory(struct wl12xx *wl, u32 addr, void *answer,
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 245544e..a2aebac 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -243,7 +243,8 @@ static void wl12xx_filter_work(struct work_struct *work)
if (ret < 0)
goto out;
- ret = wl12xx_cmd_join(wl, wl->bss_type, 1, 100, 0);
+ /* FIXME: replace the magic numbers with proper definitions */
+ ret = wl->chip.op_cmd_join(wl, wl->bss_type, 1, 100, 0);
if (ret < 0)
goto out_sleep;
@@ -534,7 +535,7 @@ static int wl12xx_op_config(struct ieee80211_hw *hw, u32 changed)
if (channel != wl->channel) {
/* FIXME: use beacon interval provided by mac80211 */
- ret = wl12xx_cmd_join(wl, wl->bss_type, 1, 100, 0);
+ ret = wl->chip.op_cmd_join(wl, wl->bss_type, 1, 100, 0);
if (ret < 0)
goto out_sleep;
@@ -1082,7 +1083,7 @@ static void wl12xx_op_bss_info_changed(struct ieee80211_hw *hw,
goto out;
if (wl->bss_type != BSS_TYPE_IBSS) {
- ret = wl12xx_cmd_join(wl, wl->bss_type, 5, 100, 1);
+ ret = wl->chip.op_cmd_join(wl, wl->bss_type, 5, 100, 1);
if (ret < 0)
goto out;
}
@@ -1106,7 +1107,7 @@ static void wl12xx_op_bss_info_changed(struct ieee80211_hw *hw,
if (ret < 0)
goto out;
- ret = wl12xx_cmd_join(wl, wl->bss_type, 1, 100, 0);
+ ret = wl->chip.op_cmd_join(wl, wl->bss_type, 1, 100, 0);
if (ret < 0)
goto out;
diff --git a/drivers/net/wireless/wl12xx/wl1251.c b/drivers/net/wireless/wl12xx/wl1251.c
index 5f6e75c..77494a9 100644
--- a/drivers/net/wireless/wl12xx/wl1251.c
+++ b/drivers/net/wireless/wl12xx/wl1251.c
@@ -717,6 +717,7 @@ void wl1251_setup(struct wl12xx *wl)
wl->chip.op_plt_init = wl1251_plt_init;
wl->chip.op_fw_version = wl1251_fw_version;
wl->chip.op_tx_flush = wl1251_tx_flush;
+ wl->chip.op_cmd_join = wl1251_cmd_join;
wl->chip.p_table = wl1251_part_table;
wl->chip.acx_reg_table = wl1251_acx_reg_table;
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index c38aa54..c673cdb 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -165,6 +165,8 @@ struct wl12xx_chip {
int (*op_plt_init)(struct wl12xx *wl);
void (*op_tx_flush)(struct wl12xx *wl);
void (*op_fw_version)(struct wl12xx *wl);
+ int (*op_cmd_join)(struct wl12xx *wl, u8 bss_type, u8 dtim_interval,
+ u16 beacon_interval, u8 wait);
struct wl12xx_partition_set *p_table;
enum wl12xx_acx_int_reg *acx_reg_table;
next prev parent reply other threads:[~2009-06-12 11:17 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-12 11:14 [PATCH 00/33] wl12xx update for 2.6.32 Kalle Valo
2009-06-12 11:14 ` [PATCH 01/33] wl12xx: cmd and acx interface rework Kalle Valo
2009-06-12 11:14 ` [PATCH 02/33] wl12xx: reserver buffer for read32()/write32() in struct wl12xx Kalle Valo
2009-06-12 11:14 ` [PATCH 03/33] wl12xx: fix error handling in wl12xx_probe() Kalle Valo
2009-06-12 11:14 ` [PATCH 04/33] wl12xx: reserve buffer for partition command in struct wl12xx Kalle Valo
2009-06-12 11:14 ` [PATCH 05/33] wl12xx: allocate buffer spi read/write command buffer kzalloc() Kalle Valo
2009-06-12 11:14 ` [PATCH 06/33] wl12xx: allocate buffer the spi busy word from struct wl12xx Kalle Valo
2009-06-12 11:15 ` [PATCH 07/33] wl12xx: use wl12xx_mem_read32() to read the rx counter Kalle Valo
2009-06-12 11:15 ` [PATCH 08/33] wl12xx: fix rx descriptor use Kalle Valo
2009-06-12 11:15 ` [PATCH 09/33] wl12xx: removed chipset interrupt source configuration from fw wakeup Kalle Valo
2009-06-12 11:15 ` [PATCH 10/33] wl12xx: add wl12xx_spi_reg_read() and wl12xx_spi_reg_write() functions Kalle Valo
2009-06-12 11:15 ` [PATCH 11/33] wl12xx: moved firmware version reading routine to chip-specific functions Kalle Valo
2009-06-12 11:15 ` [PATCH 12/33] wl12xx: add support for new WL1271 chip revision Kalle Valo
2009-06-12 11:15 ` [PATCH 13/33] wl12xx: add support for fixed address in wl12xx_spi_read Kalle Valo
2009-06-12 11:15 ` [PATCH 14/33] wl12xx: pass the wake up condition when configuring the wake up event Kalle Valo
2009-06-12 11:15 ` [PATCH 15/33] wl12xx: Moved wl1251 TX path implementation into chip specific files Kalle Valo
2009-06-12 11:16 ` [PATCH 16/33] wl12xx: Add support for block reading from a fixed register address Kalle Valo
2009-06-12 11:16 ` [PATCH 17/33] wl12xx: Fix incorrect warning message Kalle Valo
2009-06-12 11:16 ` [PATCH 18/33] wl12xx: Fix CMD_TEST regression via netlink Kalle Valo
2009-06-12 11:16 ` [PATCH 19/33] wl12xx: protect wl12xx_op_set_rts_threshold() Kalle Valo
2009-06-12 11:16 ` [PATCH 20/33] wl12xx: optimise elp wakeup and sleep calls Kalle Valo
2009-06-12 11:16 ` [PATCH 21/33] wl12xx: check if elp wakeup failed Kalle Valo
2009-06-12 11:16 ` [PATCH 22/33] wl12xx: enable ELP mode Kalle Valo
2009-06-12 11:16 ` [PATCH 23/33] wl12xx: Assign value to rx msdu lifetime variable Kalle Valo
2009-06-12 11:16 ` Kalle Valo [this message]
2009-06-12 11:16 ` [PATCH 25/33] wl12xx: rename wl1251.c wl1251_ops.c Kalle Valo
2009-06-12 11:17 ` [PATCH 26/33] wl12xx: rename driver to wl1251 Kalle Valo
2009-06-12 11:17 ` [PATCH 27/33] wl1251: remove wl1271_setup() Kalle Valo
2009-06-12 11:17 ` [PATCH 28/33] wl1251: add wl1251 prefix to all 1251 files Kalle Valo
2009-06-12 11:17 ` [PATCH 29/33] wl1251: rename wl12xx.h to wl1251.h Kalle Valo
2009-06-12 11:17 ` [PATCH 30/33] wl12xx: remove unused wl12xx_hw_init_mem_config() Kalle Valo
2009-06-12 11:17 ` [PATCH 31/33] wl1251: use wl1251 prefix everywhere Kalle Valo
2009-06-12 11:17 ` [PATCH 32/33] wl1251: fix a checkpatch warning Kalle Valo
2009-06-12 11:17 ` [PATCH 33/33] wl1251: change psm enabled/disabled info to debug Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090612111652.8877.59676.stgit@tikku \
--to=kalle.valo@iki.fi \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.