All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sergey Matyukevich <geomatsi@gmail.com>
To: Jeff Garzik <jeff@garzik.org>
Cc: linux-ide@vger.kernel.org, Sergey Lapin <slapin@ossfans.org>,
	Andrew Victor <avictor.za@gmail.com>
Subject: Re: [git patches] libata updates
Date: Tue, 23 Jun 2009 23:42:14 +0400	[thread overview]
Message-ID: <20090623234214.1b3018fd@realm> (raw)
In-Reply-To: <4A411810.6070308@garzik.org>

On Tue, 23 Jun 2009 13:59:44 -0400
Jeff Garzik <jeff@garzik.org> wrote:

> Sergey Matyukevich wrote:
> > Could you tell me where to send update for pata_at91 driver modified
> > according to Andrew's remarks ? To Jeff ? 
> 
> Me and linux-ide...
> 
> 	Jeff
> 
> 


Jeff,
Here is updated pata_at91 driver according to comments by Andrew Morton.



This patch provides PATA driver for CompactFlash interface in True IDE
mode on AT91SAM9260 SoC.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
---
 drivers/ata/Kconfig     |    8 +
 drivers/ata/Makefile    |    1 +
 drivers/ata/pata_at91.c |  367 +++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 376 insertions(+), 0 deletions(-)
 create mode 100644 drivers/ata/pata_at91.c

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 2aa1908..b17c57f 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -679,6 +679,14 @@ config PATA_PLATFORM
 
 	  If unsure, say N.
 
+config PATA_AT91
+	tristate "PATA support for AT91SAM9260"
+	depends on ARM && ARCH_AT91
+	help
+	  This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
+
+	  If unsure, say N.
+
 config PATA_OF_PLATFORM
 	tristate "OpenFirmware platform device PATA support"
 	depends on PATA_PLATFORM && PPC_OF
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 1558059..38906f9 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -72,6 +72,7 @@ obj-$(CONFIG_PATA_SCH)		+= pata_sch.o
 obj-$(CONFIG_PATA_BF54X)	+= pata_bf54x.o
 obj-$(CONFIG_PATA_OCTEON_CF)	+= pata_octeon_cf.o
 obj-$(CONFIG_PATA_PLATFORM)	+= pata_platform.o
+obj-$(CONFIG_PATA_AT91)	+= pata_at91.o
 obj-$(CONFIG_PATA_OF_PLATFORM)	+= pata_of_platform.o
 obj-$(CONFIG_PATA_ICSIDE)	+= pata_icside.o
 # Should be last but two libata driver
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
new file mode 100644
index 0000000..7dcd551
--- /dev/null
+++ b/drivers/ata/pata_at91.c
@@ -0,0 +1,367 @@
+/*
+ * PATA driver for AT91SAM9260 Static Memory Controller
+ * with CompactFlash interface in True IDE mode
+ *
+ * Copyright (C) 2009 Matyukevich Sergey
+ *
+ * Based on:
+ *      * generic platform driver by Paul Mundt: drivers/ata/pata_platform.c
+ *      * pata_at32 driver by Kristoffer Nyborg Gregertsen
+ *      * at91_ide driver by Stanislaw Gruszka
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <scsi/scsi_host.h>
+#include <linux/ata.h>
+#include <linux/clk.h>
+#include <linux/libata.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+
+#include <mach/at91sam9260_matrix.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91sam9260.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+
+
+#define DRV_NAME "pata_at91"
+#define DRV_VERSION "0.1"
+
+#define CF_IDE_OFFSET	    0x00c00000
+#define CF_ALT_IDE_OFFSET   0x00e00000
+#define CF_IDE_RES_SIZE     0x08
+
+struct at91_ide_info {
+	unsigned long mode;
+	unsigned int cs;
+	struct clk *mck;
+
+	void __iomem *ide_addr;
+	void __iomem *alt_addr;
+};
+
+static const struct ata_timing initial_timing =
+	{XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0};
+
+static unsigned long calc_mck_cycles(unsigned long ns, unsigned long mck_hz)
+{
+	unsigned long mul;
+
+	/*
+	* cycles = x [nsec] * f [Hz] / 10^9 [ns in sec] =
+	*     x * (f / 1_000_000_000) =
+	*     x * ((f * 65536) / 1_000_000_000) / 65536 =
+	*     x * (((f / 10_000) * 65536) / 100_000) / 65536 =
+	*/
+
+	mul = (mck_hz / 10000) << 16;
+	mul /= 100000;
+
+	return (ns * mul + 65536) >> 16;    /* rounding */
+}
+
+static void set_smc_mode(struct at91_ide_info *info)
+{
+	at91_sys_write(AT91_SMC_MODE(info->cs), info->mode);
+	return;
+}
+
+static void set_smc_timing(struct device *dev,
+		struct at91_ide_info *info, const struct ata_timing *ata)
+{
+	unsigned long read_cycle, write_cycle, active, recover;
+	unsigned long nrd_setup, nrd_pulse, nrd_recover;
+	unsigned long nwe_setup, nwe_pulse;
+
+	unsigned long ncs_write_setup, ncs_write_pulse;
+	unsigned long ncs_read_setup, ncs_read_pulse;
+
+	unsigned long mck_hz;
+
+	read_cycle  = ata->cyc8b;
+	nrd_setup   = ata->setup;
+	nrd_pulse   = ata->act8b;
+	nrd_recover = ata->rec8b;
+
+	mck_hz = clk_get_rate(info->mck);
+
+	read_cycle  = calc_mck_cycles(read_cycle, mck_hz);
+	nrd_setup   = calc_mck_cycles(nrd_setup, mck_hz);
+	nrd_pulse   = calc_mck_cycles(nrd_pulse, mck_hz);
+	nrd_recover = calc_mck_cycles(nrd_recover, mck_hz);
+
+	active  = nrd_setup + nrd_pulse;
+	recover = read_cycle - active;
+
+	/* Need at least two cycles recovery */
+	if (recover < 2)
+		read_cycle = active + 2;
+
+	/* (CS0, CS1, DIR, OE) <= (CFCE1, CFCE2, CFRNW, NCSX) timings */
+	ncs_read_setup = 1;
+	ncs_read_pulse = read_cycle - 2;
+
+	/* Write timings same as read timings */
+	write_cycle = read_cycle;
+	nwe_setup = nrd_setup;
+	nwe_pulse = nrd_pulse;
+	ncs_write_setup = ncs_read_setup;
+	ncs_write_pulse = ncs_read_pulse;
+
+	dev_dbg(dev, "ATA timings: nrd_setup = %lu nrd_pulse = %lu nrd_cycle = %lu\n",
+			nrd_setup, nrd_pulse, read_cycle);
+	dev_dbg(dev, "ATA timings: nwe_setup = %lu nwe_pulse = %lu nwe_cycle = %lu\n",
+			nwe_setup, nwe_pulse, write_cycle);
+	dev_dbg(dev, "ATA timings: ncs_read_setup = %lu ncs_read_pulse = %lu\n",
+			ncs_read_setup, ncs_read_pulse);
+	dev_dbg(dev, "ATA timings: ncs_write_setup = %lu ncs_write_pulse = %lu\n",
+			ncs_write_setup, ncs_write_pulse);
+
+	at91_sys_write(AT91_SMC_SETUP(info->cs),
+			AT91_SMC_NWESETUP_(nwe_setup) |
+			AT91_SMC_NRDSETUP_(nrd_setup) |
+			AT91_SMC_NCS_WRSETUP_(ncs_write_setup) |
+			AT91_SMC_NCS_RDSETUP_(ncs_read_setup));
+
+	at91_sys_write(AT91_SMC_PULSE(info->cs),
+			AT91_SMC_NWEPULSE_(nwe_pulse) |
+			AT91_SMC_NRDPULSE_(nrd_pulse) |
+			AT91_SMC_NCS_WRPULSE_(ncs_write_pulse) |
+			AT91_SMC_NCS_RDPULSE_(ncs_read_pulse));
+
+	at91_sys_write(AT91_SMC_CYCLE(info->cs),
+			AT91_SMC_NWECYCLE_(write_cycle) |
+			AT91_SMC_NRDCYCLE_(read_cycle));
+
+	return;
+}
+
+static void pata_at91_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	struct at91_ide_info *info = ap->host->private_data;
+	struct ata_timing timing;
+	int ret;
+
+	/* Compute ATA timing and set it to SMC */
+	ret = ata_timing_compute(adev, adev->pio_mode, &timing, 1000, 0);
+	if (ret) {
+		dev_warn(ap->dev, "Failed to compute ATA timing %d, \
+				set PIO_0 timing\n", ret);
+		set_smc_timing(ap->dev, info, &initial_timing);
+	} else {
+		set_smc_timing(ap->dev, info, &timing);
+	}
+
+	/* Setup SMC mode */
+	set_smc_mode(info);
+
+	return;
+}
+
+static unsigned int pata_at91_data_xfer_noirq(struct ata_device *dev,
+		unsigned char *buf, unsigned int buflen, int rw)
+{
+	struct at91_ide_info *info = dev->link->ap->host->private_data;
+	unsigned int consumed;
+	unsigned long flags;
+	unsigned int mode;
+
+	local_irq_save(flags);
+	mode = at91_sys_read(AT91_SMC_MODE(info->cs));
+
+	/* set 16bit mode before writing data */
+	at91_sys_write(AT91_SMC_MODE(info->cs),
+			(mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_16);
+
+	consumed = ata_sff_data_xfer(dev, buf, buflen, rw);
+
+	/* restore 8bit mode after data is written */
+	at91_sys_write(AT91_SMC_MODE(info->cs),
+			(mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_8);
+
+	local_irq_restore(flags);
+	return consumed;
+}
+
+static struct scsi_host_template pata_at91_sht = {
+	ATA_PIO_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations pata_at91_port_ops = {
+	.inherits	= &ata_sff_port_ops,
+
+	.sff_data_xfer	= pata_at91_data_xfer_noirq,
+	.set_piomode	= pata_at91_set_piomode,
+	.cable_detect	= ata_cable_40wire,
+	.port_start	= ATA_OP_NULL,
+};
+
+static int __devinit pata_at91_probe(struct platform_device *pdev)
+{
+	struct at91_cf_data *board = pdev->dev.platform_data;
+	struct device *dev = &pdev->dev;
+	struct at91_ide_info *info;
+	struct resource *mem_res;
+	struct ata_host *host;
+	struct ata_port *ap;
+
+	int irq_flags = 0;
+	int irq = 0;
+	int ret;
+
+	/*  get platform resources: IO/CTL memories and irq/rst pins */
+
+	if (pdev->num_resources != 1) {
+		dev_err(&pdev->dev, "invalid number of resources\n");
+		return -EINVAL;
+	}
+
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	if (!mem_res) {
+		dev_err(dev, "failed to get mem resource\n");
+		return -EINVAL;
+	}
+
+	irq = board->irq_pin;
+
+	/* init ata host */
+
+	host = ata_host_alloc(dev, 1);
+
+	if (!host)
+		return -ENOMEM;
+
+	ap = host->ports[0];
+	ap->ops = &pata_at91_port_ops;
+	ap->flags |= ATA_FLAG_SLAVE_POSS;
+	ap->pio_mask = ATA_PIO4;
+
+	if (!irq) {
+		ap->flags |= ATA_FLAG_PIO_POLLING;
+		ata_port_desc(ap, "no IRQ, using PIO polling");
+	}
+
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
+
+	if (!info) {
+		dev_err(dev, "failed to allocate memory for private data\n");
+		return -ENOMEM;
+	}
+
+	info->mck = clk_get(NULL, "mck");
+
+	if (IS_ERR(info->mck)) {
+		dev_err(dev, "failed to get access to mck clock\n");
+		return -ENODEV;
+	}
+
+	info->cs    = board->chipselect;
+	info->mode  = AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+		AT91_SMC_EXNWMODE_READY | AT91_SMC_BAT_SELECT |
+		AT91_SMC_DBW_8 | AT91_SMC_TDF_(0);
+
+	info->ide_addr = devm_ioremap(dev,
+			mem_res->start + CF_IDE_OFFSET, CF_IDE_RES_SIZE);
+
+	if (!info->ide_addr) {
+		dev_err(dev, "failed to map IO base\n");
+		ret = -ENOMEM;
+		goto err_ide_ioremap;
+	}
+
+	info->alt_addr = devm_ioremap(dev,
+			mem_res->start + CF_ALT_IDE_OFFSET, CF_IDE_RES_SIZE);
+
+	if (!info->alt_addr) {
+		dev_err(dev, "failed to map CTL base\n");
+		ret = -ENOMEM;
+		goto err_alt_ioremap;
+	}
+
+	ap->ioaddr.cmd_addr = info->ide_addr;
+	ap->ioaddr.ctl_addr = info->alt_addr + 0x06;
+	ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
+
+	ata_sff_std_ports(&ap->ioaddr);
+
+	ata_port_desc(ap, "mmio cmd 0x%llx ctl 0x%llx",
+			(unsigned long long)mem_res->start + CF_IDE_OFFSET,
+			(unsigned long long)mem_res->start + CF_ALT_IDE_OFFSET);
+
+	host->private_data = info;
+
+	return ata_host_activate(host, irq ? gpio_to_irq(irq) : 0,
+			irq ? ata_sff_interrupt : NULL,
+			irq_flags, &pata_at91_sht);
+
+err_alt_ioremap:
+	devm_iounmap(dev, info->ide_addr);
+
+err_ide_ioremap:
+	clk_put(info->mck);
+	kfree(info);
+
+	return ret;
+}
+
+static int __devexit pata_at91_remove(struct platform_device *pdev)
+{
+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	struct at91_ide_info *info = host->private_data;
+	struct device *dev = &pdev->dev;
+
+	if (!host)
+		return 0;
+
+	ata_host_detach(host);
+
+	if (!info)
+		return 0;
+
+	devm_iounmap(dev, info->ide_addr);
+	devm_iounmap(dev, info->alt_addr);
+	clk_put(info->mck);
+
+	kfree(info);
+	return 0;
+}
+
+static struct platform_driver pata_at91_driver = {
+	.probe		= pata_at91_probe,
+	.remove		= __devexit_p(pata_at91_remove),
+	.driver 	= {
+		.name		= DRV_NAME,
+		.owner		= THIS_MODULE,
+	},
+};
+
+static int __init pata_at91_init(void)
+{
+	return platform_driver_register(&pata_at91_driver);
+}
+
+static void __exit pata_at91_exit(void)
+{
+	platform_driver_unregister(&pata_at91_driver);
+}
+
+
+module_init(pata_at91_init);
+module_exit(pata_at91_exit);
+
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Driver for CF in True IDE mode on AT91SAM9260 SoC");
+MODULE_AUTHOR("Matyukevich Sergey");
+MODULE_VERSION(DRV_VERSION);
+
-- 
1.6.2.5


  reply	other threads:[~2009-06-23 19:49 UTC|newest]

Thread overview: 106+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-06-23  6:06 [git patches] libata updates Jeff Garzik
2009-06-23  6:31 ` Andrew Morton
2009-06-23 17:37   ` Sergey Matyukevich
2009-06-23 17:59     ` Jeff Garzik
2009-06-23 19:42       ` Sergey Matyukevich [this message]
2009-06-23 21:30         ` Jeff Garzik
2009-06-24 17:51           ` [PATCH] pata_at91: Updates for pata_at91 driver Sergey Matyukevich
2009-06-23 18:01     ` [git patches] libata updates Andrew Morton
  -- strict thread matches above, loose matches on Subject: below --
2013-04-30 22:26 Jeff Garzik
2013-04-30 23:18 ` Linus Torvalds
2012-07-25 20:35 Jeff Garzik
2012-07-25 20:43 ` Jeff Garzik
2012-07-25 22:06   ` Linus Torvalds
2012-07-25 22:26     ` Jeff Garzik
2012-07-25 22:31       ` Linus Torvalds
2012-07-25 22:58         ` Jeff Garzik
2012-07-25 23:30           ` Linus Torvalds
2012-07-26  2:10             ` Jeff Garzik
2012-07-26 17:14               ` Linus Torvalds
2012-07-26  7:44             ` Ingo Molnar
2012-07-25 21:38 ` Jeff Garzik
2012-07-26  4:47   ` Aaron Lu
2012-07-26  4:47     ` Aaron Lu
2012-07-26  5:05     ` James Bottomley
2012-07-26  5:17       ` Aaron Lu
2012-07-26  5:17         ` Aaron Lu
2012-07-26 14:58         ` Alan Stern
2012-07-26 14:58           ` Alan Stern
2011-01-28  8:29 Jeff Garzik
2010-08-04  1:55 Jeff Garzik
2010-08-04 18:32 ` Linus Torvalds
2010-08-04 18:46   ` Jeff Garzik
2010-06-02 18:08 Jeff Garzik
2010-05-28  1:18 Jeff Garzik
2009-12-19 18:13 Jeff Garzik
2009-12-19 19:05 ` Linus Torvalds
2009-12-19 20:11   ` Jeff Garzik
2009-09-17 20:49 Jeff Garzik
2009-09-20 21:05 ` Bartlomiej Zolnierkiewicz
2009-09-22  2:36   ` Jung-Ik (John) Lee
2009-09-28 15:34     ` Bartlomiej Zolnierkiewicz
2009-09-28 20:20       ` Jung-Ik (John) Lee
2009-09-28 20:36         ` Jeff Garzik
2009-09-28 20:49       ` Jung-Ik (John) Lee
2009-10-06  4:24       ` Jeff Garzik
2009-10-06 22:26         ` Bartlomiej Zolnierkiewicz
2009-10-06 23:02           ` Jeff Garzik
2009-04-07  1:42 Jeff Garzik
2009-03-25  3:01 Jeff Garzik
2009-02-03  4:27 Jeff Garzik
2009-01-08 21:46 Jeff Garzik
2008-10-28  4:45 Jeff Garzik
2008-08-22  7:04 Jeff Garzik
2008-07-31  6:51 Jeff Garzik
2008-05-19 22:57 Jeff Garzik
2008-05-06 15:48 Jeff Garzik
2008-05-06 16:23 ` Linus Torvalds
2008-04-29  6:25 Jeff Garzik
2008-02-25 22:38 Jeff Garzik
2008-02-06 12:14 Jeff Garzik
2008-02-01 18:33 Jeff Garzik
2008-01-25 23:16 Jeff Garzik
2007-10-25  7:49 Jeff Garzik
2007-10-15 20:20 Jeff Garzik
2007-07-20 15:00 Jeff Garzik
2007-07-12 20:20 Jeff Garzik
2007-07-10 18:36 Jeff Garzik
2007-05-11 22:32 Jeff Garzik
2007-05-12 10:06 ` Andreas Arens
2007-04-29 16:15 Jeff Garzik
2007-04-30 19:52 ` Chuck Ebbert
2007-04-30 20:05   ` Jeff Garzik
2007-04-30 20:22     ` Stephen Clark
2007-04-30 20:31       ` Alan Cox
2007-04-30 20:51         ` alan
2007-04-30 20:31       ` Jeff Garzik
2007-05-01 11:55         ` Stephen Clark
2007-05-01 21:38       ` Jesse Barnes
2007-05-01 22:45         ` Stephen Clark
2007-05-01 22:49           ` Jesse Barnes
2007-05-01 22:49           ` Chuck Ebbert
2007-05-02  0:48             ` Stephen Clark
2007-04-30 22:06     ` Chuck Ebbert
2007-04-30 22:11       ` Jeff Garzik
2007-05-01 21:34 ` Jesse Barnes
2007-05-10  0:18   ` Jeff Garzik
2006-12-14 23:08 Jeff Garzik
2006-12-15  1:14 ` Alan
2006-12-07 12:40 Jeff Garzik
2006-10-04  6:02 Jeff Garzik
2006-10-04 11:47 ` Alan Cox
2006-10-04 14:34   ` Alan Cox
     [not found] <20060924162850.GA14323@havoc.gtf.org>
2006-09-24 16:33 ` Jeff Garzik
2006-03-30 22:01 Jeff Garzik
2006-03-24 15:59 Jeff Garzik
2006-03-23  1:15 Jeff Garzik
2006-03-23  1:36 ` Jeff Garzik
2006-03-20 11:16 Jeff Garzik
2006-03-20 16:35 ` Alan Cox
2006-03-21  1:12   ` Jeff Garzik
2006-03-21 10:20     ` Alan Cox
2006-03-21 16:40       ` Jeff Garzik
2006-03-21 17:23         ` Alan Cox
2006-02-01  4:14 Jeff Garzik
2005-09-23 23:11 Jeff Garzik
2005-09-07  6:10 Jeff Garzik

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090623234214.1b3018fd@realm \
    --to=geomatsi@gmail.com \
    --cc=avictor.za@gmail.com \
    --cc=jeff@garzik.org \
    --cc=linux-ide@vger.kernel.org \
    --cc=slapin@ossfans.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.