From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: "Greg Kroah-Hartman" <gregkh@suse.de>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH 10/18] Staging: rtl8187se: remove unused rtl8225_rf_* functions
Date: Sun, 28 Jun 2009 16:19:45 +0200 [thread overview]
Message-ID: <20090628141945.8761.87017.sendpatchset@localhost.localdomain> (raw)
In-Reply-To: <20090628141844.8761.8943.sendpatchset@localhost.localdomain>
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] Staging: rtl8187se: remove unused rtl8225_rf_* functions
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/staging/rtl8187se/r8180_core.c | 4
drivers/staging/rtl8187se/r8180_rtl8225.c | 369 ------------------------------
drivers/staging/rtl8187se/r8180_rtl8225.h | 4
3 files changed, 377 deletions(-)
Index: b/drivers/staging/rtl8187se/r8180_core.c
===================================================================
--- a/drivers/staging/rtl8187se/r8180_core.c
+++ b/drivers/staging/rtl8187se/r8180_core.c
@@ -3613,10 +3613,6 @@ DMESG output to andreamrl@tiscali.it THA
priv->rf_init = rtl8225z2_rf_init;
priv->rf_set_chan = rtl8225z2_rf_set_chan;
priv->rf_set_sens = NULL;
- //priv->rf_sleep = rtl8225_rf_sleep;
- //priv->rf_wakeup = rtl8225_rf_wakeup;
-
-
if(!priv->card_8185){
if(priv->antb)
Index: b/drivers/staging/rtl8187se/r8180_rtl8225.c
===================================================================
--- a/drivers/staging/rtl8187se/r8180_rtl8225.c
+++ b/drivers/staging/rtl8187se/r8180_rtl8225.c
@@ -178,17 +178,6 @@ void write_rtl8225(struct net_device *de
rtl8185_rf_pins_enable(dev);
}
-void rtl8225_rf_close(struct net_device *dev)
-{
- write_rtl8225(dev, 0x4, 0x1f);
-
- force_pci_posting(dev);
- mdelay(1);
-
- rtl8180_set_anaparam(dev, RTL8225_ANAPARAM_OFF);
- rtl8185_set_anaparam2(dev, RTL8225_ANAPARAM2_OFF);
-}
-
void rtl8225_SetTXPowerLevel(struct net_device *dev, short ch)
{
struct r8180_priv *priv = ieee80211_priv(dev);
@@ -354,361 +343,3 @@ void rtl8225_host_pci_init(struct net_de
void rtl8225_host_usb_init(struct net_device *dev)
{
}
-
-void rtl8225_rf_sleep(struct net_device *dev)
-{
- write_rtl8225(dev,0x4,0xdff);
- force_pci_posting(dev);
- mdelay(1);
- rtl8180_set_anaparam(dev, RTL8225_ANAPARAM_SLEEP);
- rtl8185_set_anaparam2(dev, RTL8225_ANAPARAM2_SLEEP);
- force_pci_posting(dev);
-}
-
-void rtl8225_rf_wakeup(struct net_device *dev)
-{
- write_rtl8225(dev,0x4,0x9ff);
- rtl8180_set_anaparam(dev, RTL8225_ANAPARAM_ON);
- rtl8185_set_anaparam2(dev, RTL8225_ANAPARAM2_ON);
- force_pci_posting(dev);
-}
-
-void rtl8225_rf_init(struct net_device *dev)
-{
- struct r8180_priv *priv = ieee80211_priv(dev);
- int i;
- short channel = 1;
- u16 brsr;
-
- priv->chan = channel;
-
- rtl8180_set_anaparam(dev, RTL8225_ANAPARAM_ON);
-
-
- if(priv->card_type == USB)
- rtl8225_host_usb_init(dev);
- else
- rtl8225_host_pci_init(dev);
-
- write_nic_dword(dev, RF_TIMING, 0x000a8008);
-
- brsr = read_nic_word(dev, BRSR);
-
- write_nic_word(dev, BRSR, 0xffff);
-
- write_nic_dword(dev, RF_PARA, 0x100044);
-
- #if 1 //0->1
- rtl8180_set_mode(dev, EPROM_CMD_CONFIG);
- write_nic_byte(dev, CONFIG3, 0x44);
- rtl8180_set_mode(dev, EPROM_CMD_NORMAL);
- #endif
-
- if(priv->card_type == USB){
- rtl8185_rf_pins_enable(dev);
-
- mdelay(1000);
- }
-
- write_rtl8225(dev, 0x0, 0x67); mdelay(1);
-
-
- write_rtl8225(dev, 0x1, 0xfe0); mdelay(1);
-
- write_rtl8225(dev, 0x2, 0x44d); mdelay(1);
-
- write_rtl8225(dev, 0x3, 0x441); mdelay(1);
-
- if(priv->card_type == USB)
- write_rtl8225(dev, 0x4, 0x486);
- else
- write_rtl8225(dev, 0x4, 0x8be);
-
- mdelay(1);
-
- /* version B & C */
-
- if(priv->card_type == USB)
- write_rtl8225(dev, 0x5, 0xbc0);
- else if(priv->card_type == MINIPCI)
- write_rtl8225(dev, 0x5, 0xbc0 + 3 +(6<<3));
- else
- write_rtl8225(dev, 0x5, 0xbc0 + (6<<3));
-
- mdelay(1);
-// }
-
- write_rtl8225(dev, 0x6, 0xae6); mdelay(1);
-
- write_rtl8225(dev, 0x7, ((priv->card_type == USB)? 0x82a : rtl8225_chan[channel])); mdelay(1);
-
- write_rtl8225(dev, 0x8, 0x1f); mdelay(1);
-
- write_rtl8225(dev, 0x9, 0x334); mdelay(1);
-
- write_rtl8225(dev, 0xa, 0xfd4); mdelay(1);
-
- write_rtl8225(dev, 0xb, 0x391); mdelay(1);
-
- write_rtl8225(dev, 0xc, 0x50); mdelay(1);
-
-
- write_rtl8225(dev, 0xd, 0x6db); mdelay(1);
-
- write_rtl8225(dev, 0xe, 0x29); mdelay(1);
-
- write_rtl8225(dev, 0xf, 0x914);
-
- if(priv->card_type == USB){
- //force_pci_posting(dev);
- mdelay(100);
- }
-
- write_rtl8225(dev, 0x2, 0xc4d);
-
- if(priv->card_type == USB){
- // force_pci_posting(dev);
- mdelay(200);
-
- write_rtl8225(dev, 0x2, 0x44d);
-
- // force_pci_posting(dev);
- mdelay(100);
-
- }//End of if(priv->card_type == USB)
- /* FIXME!! rtl8187 we have to check if calibrarion
- * is successful and eventually cal. again (repeat
- * the two write on reg 2)
- */
- force_pci_posting(dev);
-
- mdelay(100); //200 for 8187
-
- //if(priv->card_type != USB) /* maybe not needed even for 8185 */
-// write_rtl8225(dev, 0x7, rtl8225_chan[channel]);
-
- write_rtl8225(dev, 0x0, 0x127);
-
- for(i=0;i<95;i++){
- write_rtl8225(dev, 0x1, (u8)(i+1));
-
- /* version B & C & D*/
-
- write_rtl8225(dev, 0x2, rtl8225bcd_rxgain[i]);
- }
-
- write_rtl8225(dev, 0x0, 0x27);
-
-
-// //if(priv->card_type != USB){
-// write_rtl8225(dev, 0x2, 0x44d);
-// write_rtl8225(dev, 0x7, rtl8225_chan[channel]);
-// write_rtl8225(dev, 0x2, 0x47d);
-//
-// force_pci_posting(dev);
-// mdelay(100);
-//
-// write_rtl8225(dev, 0x2, 0x44d);
-// //}
-
- write_rtl8225(dev, 0x0, 0x22f);
-
- if(priv->card_type != USB)
- rtl8185_rf_pins_enable(dev);
-
- for(i=0;i<128;i++){
- write_phy_ofdm(dev, 0xb, rtl8225_agc[i]);
-
- mdelay(1);
- write_phy_ofdm(dev, 0xa, (u8)i+ 0x80);
-
- mdelay(1);
- }
-
- force_pci_posting(dev);
- mdelay(1);
-
- write_phy_ofdm(dev, 0x0, 0x1); mdelay(1);
- write_phy_ofdm(dev, 0x1, 0x2); mdelay(1);
- write_phy_ofdm(dev, 0x2, ((priv->card_type == USB)? 0x42 : 0x62)); mdelay(1);
- write_phy_ofdm(dev, 0x3, 0x0); mdelay(1);
- write_phy_ofdm(dev, 0x4, 0x0); mdelay(1);
- write_phy_ofdm(dev, 0x5, 0x0); mdelay(1);
- write_phy_ofdm(dev, 0x6, 0x40); mdelay(1);
- write_phy_ofdm(dev, 0x7, 0x0); mdelay(1);
- write_phy_ofdm(dev, 0x8, 0x40); mdelay(1);
- write_phy_ofdm(dev, 0x9, 0xfe); mdelay(1);
-
- /* ver C & D */
- write_phy_ofdm(dev, 0xa, 0x9); mdelay(1);
-
- //write_phy_ofdm(dev, 0x18, 0xef);
- // }
- //}
- write_phy_ofdm(dev, 0xb, 0x80); mdelay(1);
-
- write_phy_ofdm(dev, 0xc, 0x1);mdelay(1);
-
-
- //if(priv->card_type != USB)
- //write_phy_ofdm(dev, 0xd, 0x33); // <>
-
- write_phy_ofdm(dev, 0xe, 0xd3);mdelay(1);
-
-
- write_phy_ofdm(dev, 0xf, 0x38);mdelay(1);
-/*ver D & 8187*/
-// }
-
-// if(priv->card_8185 == 1 && priv->card_8185_Bversion)
-// write_phy_ofdm(dev, 0x10, 0x04);/*ver B*/
-// else
- write_phy_ofdm(dev, 0x10, 0x84);mdelay(1);
-/*ver C & D & 8187*/
-
- write_phy_ofdm(dev, 0x11, 0x06);mdelay(1);
-/*agc resp time 700*/
-
-
-// if(priv->card_8185 == 2){
- /* Ver D & 8187*/
- write_phy_ofdm(dev, 0x12, 0x20);mdelay(1);
-
- write_phy_ofdm(dev, 0x13, 0x20);mdelay(1);
-
- write_phy_ofdm(dev, 0x14, 0x0); mdelay(1);
- write_phy_ofdm(dev, 0x15, 0x40); mdelay(1);
- write_phy_ofdm(dev, 0x16, 0x0); mdelay(1);
- write_phy_ofdm(dev, 0x17, 0x40); mdelay(1);
-
-// if (priv->card_type == USB)
-// write_phy_ofdm(dev, 0x18, 0xef);
-
- write_phy_ofdm(dev, 0x18, 0xef);mdelay(1);
-
-
- write_phy_ofdm(dev, 0x19, 0x19); mdelay(1);
- write_phy_ofdm(dev, 0x1a, 0x20); mdelay(1);
-
-// if (priv->card_type != USB){
-// if(priv->card_8185 == 1 && priv->card_8185_Bversion)
-// write_phy_ofdm(dev, 0x1b, 0x66); /* Ver B */
-// else
- write_phy_ofdm(dev, 0x1b, 0x76);mdelay(1);
- /* Ver C & D */ //FIXME:MAYBE not needed
-// }
-
- write_phy_ofdm(dev, 0x1c, 0x4);mdelay(1);
-
- /*ver D & 8187*/
- write_phy_ofdm(dev, 0x1e, 0x95);mdelay(1);
-
- write_phy_ofdm(dev, 0x1f, 0x75); mdelay(1);
-
-// }
-
- write_phy_ofdm(dev, 0x20, 0x1f);mdelay(1);
-
- write_phy_ofdm(dev, 0x21, 0x27);mdelay(1);
-
- write_phy_ofdm(dev, 0x22, 0x16);mdelay(1);
-
-// if(priv->card_type != USB)
- //write_phy_ofdm(dev, 0x23, 0x43); //FIXME maybe not needed // <>
-
- write_phy_ofdm(dev, 0x24, 0x46); mdelay(1);
- write_phy_ofdm(dev, 0x25, 0x20); mdelay(1);
- write_phy_ofdm(dev, 0x26, 0x90); mdelay(1);
- write_phy_ofdm(dev, 0x27, 0x88); mdelay(1);
-/* Ver C & D & 8187*/
-
- // <> Set init. gain to m74dBm.
- write_phy_ofdm(dev, 0x0d, 0x43); mdelay(1);
- write_phy_ofdm(dev, 0x1b, 0x76); mdelay(1);
- write_phy_ofdm(dev, 0x1d, 0xc5); mdelay(1);
- write_phy_ofdm(dev, 0x23, 0x78); mdelay(1);
-
- //if(priv->card_type == USB);
- // rtl8225_set_gain_usb(dev, 1); /* FIXME this '2' is random */
-
- write_phy_cck(dev, 0x0, 0x98); mdelay(1);
- write_phy_cck(dev, 0x3, 0x20); mdelay(1);
- write_phy_cck(dev, 0x4, 0x7e); mdelay(1);
- write_phy_cck(dev, 0x5, 0x12); mdelay(1);
- write_phy_cck(dev, 0x6, 0xfc); mdelay(1);
- write_phy_cck(dev, 0x7, 0x78);mdelay(1);
- /* Ver C & D & 8187*/
-
- write_phy_cck(dev, 0x8, 0x2e);mdelay(1);
-
- write_phy_cck(dev, 0x10, ((priv->card_type == USB) ? 0x9b: 0x93)); mdelay(1);
- write_phy_cck(dev, 0x11, 0x88); mdelay(1);
- write_phy_cck(dev, 0x12, 0x47); mdelay(1);
- write_phy_cck(dev, 0x13, 0xd0); /* Ver C & D & 8187*/
-
- write_phy_cck(dev, 0x19, 0x0);
- write_phy_cck(dev, 0x1a, 0xa0);
- write_phy_cck(dev, 0x1b, 0x8);
- write_phy_cck(dev, 0x40, 0x86); /* CCK Carrier Sense Threshold */
-
- write_phy_cck(dev, 0x41, 0x8d);mdelay(1);
-
-
- write_phy_cck(dev, 0x42, 0x15); mdelay(1);
- write_phy_cck(dev, 0x43, 0x18); mdelay(1);
- write_phy_cck(dev, 0x44, 0x1f); mdelay(1);
- write_phy_cck(dev, 0x45, 0x1e); mdelay(1);
- write_phy_cck(dev, 0x46, 0x1a); mdelay(1);
- write_phy_cck(dev, 0x47, 0x15); mdelay(1);
- write_phy_cck(dev, 0x48, 0x10); mdelay(1);
- write_phy_cck(dev, 0x49, 0xa); mdelay(1);
- write_phy_cck(dev, 0x4a, 0x5); mdelay(1);
- write_phy_cck(dev, 0x4b, 0x2); mdelay(1);
- write_phy_cck(dev, 0x4c, 0x5);mdelay(1);
-
-
- write_nic_byte(dev, 0x5b, 0x0d); mdelay(1);
-
-
-
-// <>
-// // TESTR 0xb 8187
-// write_phy_cck(dev, 0x10, 0x93);// & 0xfb);
-//
-// //if(priv->card_type != USB){
-// write_phy_ofdm(dev, 0x2, 0x62);
-// write_phy_ofdm(dev, 0x6, 0x0);
-// write_phy_ofdm(dev, 0x8, 0x0);
-// //}
-
- rtl8225_SetTXPowerLevel(dev, channel);
-
- write_phy_cck(dev, 0x10, 0x9b); mdelay(1); /* Rx ant A, 0xdb for B */
- write_phy_ofdm(dev, 0x26, 0x90); mdelay(1); /* Rx ant A, 0x10 for B */
-
- rtl8185_tx_antenna(dev, 0x3); /* TX ant A, 0x0 for B */
-
- /* switch to high-speed 3-wire
- * last digit. 2 for both cck and ofdm
- */
- if(priv->card_type == USB)
- write_nic_dword(dev, 0x94, 0x3dc00002);
- else{
- write_nic_dword(dev, 0x94, 0x15c00002);
- rtl8185_rf_pins_enable(dev);
- }
-
-// if(priv->card_type != USB)
-// rtl8225_set_gain(dev, 4); /* FIXME this '1' is random */ // <>
-// rtl8225_set_mode(dev, 1); /* FIXME start in B mode */ // <>
-//
-// /* make sure is waken up! */
-// write_rtl8225(dev,0x4, 0x9ff);
-// rtl8180_set_anaparam(dev, RTL8225_ANAPARAM_ON);
-// rtl8185_set_anaparam2(dev, RTL8225_ANAPARAM2_ON);
-
- rtl8225_rf_set_chan(dev, priv->chan);
-
- write_nic_word(dev,BRSR,brsr);
-
-}
Index: b/drivers/staging/rtl8187se/r8180_rtl8225.h
===================================================================
--- a/drivers/staging/rtl8187se/r8180_rtl8225.h
+++ b/drivers/staging/rtl8187se/r8180_rtl8225.h
@@ -29,11 +29,7 @@ void rtl8225_host_usb_init(struct net_de
void write_rtl8225(struct net_device *dev, u8 adr, u16 data);
void RF_WriteReg(struct net_device *dev, u8 offset, u32 data);
u32 RF_ReadReg(struct net_device *dev, u8 offset);
-void rtl8225_rf_init(struct net_device *dev);
void rtl8225_rf_set_chan(struct net_device *dev,short ch);
-void rtl8225_rf_close(struct net_device *dev);
-void rtl8225_rf_sleep(struct net_device *dev);
-void rtl8225_rf_wakeup(struct net_device *dev);
void rtl8180_set_mode(struct net_device *dev,int mode);
void rtl8180_set_mode(struct net_device *dev,int mode);
bool SetZebraRFPowerState8185(struct net_device *dev,RT_RF_POWER_STATE eRFPowerState);
next prev parent reply other threads:[~2009-06-28 14:14 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-28 14:18 [PATCH 01/18] Staging: rtl8187se: remove ENABLE_DOT11D ifdefs Bartlomiej Zolnierkiewicz
2009-06-28 14:18 ` [PATCH 02/18] Staging: rtl8187se: remove CONFIG_RTL8180_PM ifdefs Bartlomiej Zolnierkiewicz
2009-06-28 14:18 ` [PATCH 03/18] Staging: rtl8187se: remove THOMAS_TURBO ifdefs Bartlomiej Zolnierkiewicz
2009-06-28 14:19 ` [PATCH 04/18] Staging: rtl8187se: remove CONFIG_RTL818x_S ifdefs Bartlomiej Zolnierkiewicz
2009-06-28 14:19 ` [PATCH 05/18] Staging: rtl8187se: remove CONFIG_RTL8185B ifdefs Bartlomiej Zolnierkiewicz
2009-06-28 14:19 ` [PATCH 06/18] Staging: rtl8187se: remove CONFIG_RTL8180_IO_MAP ifdefs Bartlomiej Zolnierkiewicz
2009-06-28 14:19 ` [PATCH 07/18] Staging: rtl8187se: remove dead code Bartlomiej Zolnierkiewicz
2009-06-28 14:19 ` [PATCH 08/18] Staging: rtl8187se: remove unused radio frontends Bartlomiej Zolnierkiewicz
2009-06-28 14:19 ` [PATCH 09/18] Staging: rtl8187se: remove debugging code from r8180_core.c Bartlomiej Zolnierkiewicz
2009-06-28 14:19 ` Bartlomiej Zolnierkiewicz [this message]
2009-06-28 14:19 ` [PATCH 11/18] Staging: rtl8187se: cleanup r8180_rtl8225.c Bartlomiej Zolnierkiewicz
2009-06-28 14:19 ` [PATCH 12/18] Staging: rtl8187se: merge r8180_rtl8225.c with r8180_rtl8225z2.c Bartlomiej Zolnierkiewicz
2009-06-28 14:20 ` [PATCH 13/18] Staging: rtl8187se: cleanup r8180_pm.c Bartlomiej Zolnierkiewicz
2009-06-28 14:20 ` [PATCH 14/18] Staging: rtl8187se: merge r8180_pm.c with r8180_core.c Bartlomiej Zolnierkiewicz
2009-06-28 14:20 ` [PATCH 15/18] Staging: rtl8187se: remove unused definitions from r8180_hw.h Bartlomiej Zolnierkiewicz
2009-06-28 14:20 ` [PATCH 16/18] Staging: rtl8187se: remove unused definitions from r8180.h Bartlomiej Zolnierkiewicz
2009-06-28 14:20 ` [PATCH 17/18] Staging: rtl8187se: cleanup r8180_rtl8225z2.c Bartlomiej Zolnierkiewicz
2009-06-28 14:20 ` [PATCH 18/18] Staging: rtl8187se: cleanup r8180_core.c Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090628141945.8761.87017.sendpatchset@localhost.localdomain \
--to=bzolnier@gmail.com \
--cc=gregkh@suse.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.