From: Ivo van Doorn <ivdoorn@gmail.com>
To: John Linville <linville@tuxdriver.com>
Cc: users@rt2x00.serialmonkey.com, linux-wireless@vger.kernel.org
Subject: [PATCH] rt2x00: use wiphy rfkill interface
Date: Wed, 1 Jul 2009 15:17:35 +0200 [thread overview]
Message-ID: <200907011517.35638.IvDoorn@gmail.com> (raw)
Remove the input_polldev from rt2x00 and replace it with
the rfkill interface offered by the wiphy structure. This
simplifies the entire rfkill handling in rt2x00 and allows
us to remove the CONFIG_RT2X00_LIB_RFKILL option and always
enables rfkill capabilities.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/Kconfig | 8 --
drivers/net/wireless/rt2x00/Makefile | 1 -
drivers/net/wireless/rt2x00/rt2400pci.c | 7 +--
drivers/net/wireless/rt2x00/rt2500pci.c | 7 +--
drivers/net/wireless/rt2x00/rt2500usb.c | 7 +--
drivers/net/wireless/rt2x00/rt2800usb.c | 7 +--
drivers/net/wireless/rt2x00/rt2x00.h | 13 +---
drivers/net/wireless/rt2x00/rt2x00dev.c | 2 -
drivers/net/wireless/rt2x00/rt2x00lib.h | 21 +----
drivers/net/wireless/rt2x00/rt2x00mac.c | 9 ++
drivers/net/wireless/rt2x00/rt2x00rfkill.c | 127 ----------------------------
drivers/net/wireless/rt2x00/rt61pci.c | 7 +--
drivers/net/wireless/rt2x00/rt73usb.c | 7 +--
13 files changed, 20 insertions(+), 203 deletions(-)
delete mode 100644 drivers/net/wireless/rt2x00/rt2x00rfkill.c
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index b6e8fb4..96f9d61 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -142,14 +142,6 @@ config RT2X00_LIB_FIRMWARE
config RT2X00_LIB_CRYPTO
boolean
-config RT2X00_LIB_RFKILL
- boolean
- default y if (RT2X00_LIB=y && INPUT=y) || (RT2X00_LIB=m && INPUT!=n)
- select INPUT_POLLDEV
-
-comment "rt2x00 rfkill support disabled due to modularized INPUT and built-in rt2x00"
- depends on RT2X00_LIB=y && INPUT=m
-
config RT2X00_LIB_LEDS
boolean
default y if (RT2X00_LIB=y && LEDS_CLASS=y) || (RT2X00_LIB=m && LEDS_CLASS!=n)
diff --git a/drivers/net/wireless/rt2x00/Makefile b/drivers/net/wireless/rt2x00/Makefile
index 2d1be47..912f5f6 100644
--- a/drivers/net/wireless/rt2x00/Makefile
+++ b/drivers/net/wireless/rt2x00/Makefile
@@ -5,7 +5,6 @@ rt2x00lib-y += rt2x00queue.o
rt2x00lib-y += rt2x00link.o
rt2x00lib-$(CONFIG_RT2X00_LIB_DEBUGFS) += rt2x00debug.o
rt2x00lib-$(CONFIG_RT2X00_LIB_CRYPTO) += rt2x00crypto.o
-rt2x00lib-$(CONFIG_RT2X00_LIB_RFKILL) += rt2x00rfkill.o
rt2x00lib-$(CONFIG_RT2X00_LIB_FIRMWARE) += rt2x00firmware.o
rt2x00lib-$(CONFIG_RT2X00_LIB_LEDS) += rt2x00leds.o
rt2x00lib-$(CONFIG_RT2X00_LIB_HT) += rt2x00ht.o
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 435f945..d8035e3 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -199,7 +199,6 @@ static const struct rt2x00debug rt2400pci_rt2x00debug = {
};
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
-#ifdef CONFIG_RT2X00_LIB_RFKILL
static int rt2400pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
@@ -207,9 +206,6 @@ static int rt2400pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
rt2x00pci_register_read(rt2x00dev, GPIOCSR, ®);
return rt2x00_get_field32(reg, GPIOCSR_BIT0);
}
-#else
-#define rt2400pci_rfkill_poll NULL
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
#ifdef CONFIG_RT2X00_LIB_LEDS
static void rt2400pci_brightness_set(struct led_classdev *led_cdev,
@@ -1391,10 +1387,8 @@ static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
/*
* Detect if this device has an hardware controlled radio.
*/
-#ifdef CONFIG_RT2X00_LIB_RFKILL
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
/*
* Check if the BBP tuning should be enabled.
@@ -1573,6 +1567,7 @@ static const struct ieee80211_ops rt2400pci_mac80211_ops = {
.get_tx_stats = rt2x00mac_get_tx_stats,
.get_tsf = rt2400pci_get_tsf,
.tx_last_beacon = rt2400pci_tx_last_beacon,
+ .rfkill_poll = rt2x00mac_rfkill_poll,
};
static const struct rt2x00lib_ops rt2400pci_rt2x00_ops = {
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 08b30d0..c123e28 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -199,7 +199,6 @@ static const struct rt2x00debug rt2500pci_rt2x00debug = {
};
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
-#ifdef CONFIG_RT2X00_LIB_RFKILL
static int rt2500pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
@@ -207,9 +206,6 @@ static int rt2500pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
rt2x00pci_register_read(rt2x00dev, GPIOCSR, ®);
return rt2x00_get_field32(reg, GPIOCSR_BIT0);
}
-#else
-#define rt2500pci_rfkill_poll NULL
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
#ifdef CONFIG_RT2X00_LIB_LEDS
static void rt2500pci_brightness_set(struct led_classdev *led_cdev,
@@ -1548,10 +1544,8 @@ static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
/*
* Detect if this device has an hardware controlled radio.
*/
-#ifdef CONFIG_RT2X00_LIB_RFKILL
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
/*
* Check if the BBP tuning should be enabled.
@@ -1872,6 +1866,7 @@ static const struct ieee80211_ops rt2500pci_mac80211_ops = {
.get_tx_stats = rt2x00mac_get_tx_stats,
.get_tsf = rt2500pci_get_tsf,
.tx_last_beacon = rt2500pci_tx_last_beacon,
+ .rfkill_poll = rt2x00mac_rfkill_poll,
};
static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = {
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 66daf68..795706d 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -277,7 +277,6 @@ static const struct rt2x00debug rt2500usb_rt2x00debug = {
};
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
-#ifdef CONFIG_RT2X00_LIB_RFKILL
static int rt2500usb_rfkill_poll(struct rt2x00_dev *rt2x00dev)
{
u16 reg;
@@ -285,9 +284,6 @@ static int rt2500usb_rfkill_poll(struct rt2x00_dev *rt2x00dev)
rt2500usb_register_read(rt2x00dev, MAC_CSR19, ®);
return rt2x00_get_field32(reg, MAC_CSR19_BIT7);
}
-#else
-#define rt2500usb_rfkill_poll NULL
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
#ifdef CONFIG_RT2X00_LIB_LEDS
static void rt2500usb_brightness_set(struct led_classdev *led_cdev,
@@ -1601,10 +1597,8 @@ static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
/*
* Detect if this device has an hardware controlled radio.
*/
-#ifdef CONFIG_RT2X00_LIB_RFKILL
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
/*
* Check if the BBP tuning should be disabled.
@@ -1905,6 +1899,7 @@ static const struct ieee80211_ops rt2500usb_mac80211_ops = {
.bss_info_changed = rt2x00mac_bss_info_changed,
.conf_tx = rt2x00mac_conf_tx,
.get_tx_stats = rt2x00mac_get_tx_stats,
+ .rfkill_poll = rt2x00mac_rfkill_poll,
};
static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = {
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 3756166..a204e66 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -264,7 +264,6 @@ static const struct rt2x00debug rt2800usb_rt2x00debug = {
};
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
-#ifdef CONFIG_RT2X00_LIB_RFKILL
static int rt2800usb_rfkill_poll(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
@@ -272,9 +271,6 @@ static int rt2800usb_rfkill_poll(struct rt2x00_dev *rt2x00dev)
rt2x00usb_register_read(rt2x00dev, GPIO_CTRL_CFG, ®);
return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2);
}
-#else
-#define rt2800usb_rfkill_poll NULL
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
#ifdef CONFIG_RT2X00_LIB_LEDS
static void rt2800usb_brightness_set(struct led_classdev *led_cdev,
@@ -2385,10 +2381,8 @@ static int rt2800usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
/*
* Detect if this device has an hardware controlled radio.
*/
-#ifdef CONFIG_RT2X00_LIB_RFKILL
if (rt2x00_get_field16(eeprom, EEPROM_NIC_HW_RADIO))
__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
/*
* Store led settings, for correct led behaviour.
@@ -2800,6 +2794,7 @@ static const struct ieee80211_ops rt2800usb_mac80211_ops = {
.conf_tx = rt2800usb_conf_tx,
.get_tx_stats = rt2x00mac_get_tx_stats,
.get_tsf = rt2800usb_get_tsf,
+ .rfkill_poll = rt2x00mac_rfkill_poll,
};
static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 509ab90..de3f13a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -657,18 +657,6 @@ struct rt2x00_dev {
enum ieee80211_band curr_band;
/*
- * rfkill structure for RF state switching support.
- * This will only be compiled in when required.
- */
-#ifdef CONFIG_RT2X00_LIB_RFKILL
- unsigned long rfkill_state;
-#define RFKILL_STATE_ALLOCATED 1
-#define RFKILL_STATE_REGISTERED 2
-#define RFKILL_STATE_BLOCKED 3
- struct input_polled_dev *rfkill_poll_dev;
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
-
- /*
* If enabled, the debugfs interface structures
* required for deregistration of debugfs.
*/
@@ -998,6 +986,7 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw,
u32 changes);
int rt2x00mac_conf_tx(struct ieee80211_hw *hw, u16 queue,
const struct ieee80211_tx_queue_params *params);
+void rt2x00mac_rfkill_poll(struct ieee80211_hw *hw);
/*
* Driver allocation handlers.
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 41e3379..4fff3a8 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -871,7 +871,6 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
*/
rt2x00link_register(rt2x00dev);
rt2x00leds_register(rt2x00dev);
- rt2x00rfkill_allocate(rt2x00dev);
rt2x00debug_register(rt2x00dev);
set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
@@ -903,7 +902,6 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
* Free extra components
*/
rt2x00debug_deregister(rt2x00dev);
- rt2x00rfkill_free(rt2x00dev);
rt2x00leds_unregister(rt2x00dev);
/*
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index 39e00b3..2c3c239 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -30,10 +30,8 @@
/*
* Interval defines
- * Both the link tuner as the rfkill will be called once per second.
*/
#define LINK_TUNE_INTERVAL round_jiffies_relative(HZ)
-#define RFKILL_POLL_INTERVAL 1000
/*
* rt2x00_rate: Per rate device information
@@ -386,29 +384,18 @@ static inline void rt2x00ht_create_tx_descriptor(struct queue_entry *entry,
/*
* RFkill handlers.
*/
-#ifdef CONFIG_RT2X00_LIB_RFKILL
-void rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev);
-void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev);
-void rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev);
-void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev);
-#else
static inline void rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev)
{
+ if (test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
+ wiphy_rfkill_start_polling(rt2x00dev->hw->wiphy);
}
static inline void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev)
{
+ if (test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
+ wiphy_rfkill_stop_polling(rt2x00dev->hw->wiphy);
}
-static inline void rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev)
-{
-}
-
-static inline void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev)
-{
-}
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
-
/*
* LED handlers
*/
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index 475a3ed..b7e0ddd 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -688,3 +688,12 @@ int rt2x00mac_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
return 0;
}
EXPORT_SYMBOL_GPL(rt2x00mac_conf_tx);
+
+void rt2x00mac_rfkill_poll(struct ieee80211_hw *hw)
+{
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+ bool blocked = !!rt2x00dev->ops->lib->rfkill_poll(rt2x00dev);
+
+ wiphy_rfkill_set_hw_state(hw->wiphy, blocked);
+}
+EXPORT_SYMBOL_GPL(rt2x00mac_rfkill_poll);
diff --git a/drivers/net/wireless/rt2x00/rt2x00rfkill.c b/drivers/net/wireless/rt2x00/rt2x00rfkill.c
deleted file mode 100644
index b6d4c67..0000000
--- a/drivers/net/wireless/rt2x00/rt2x00rfkill.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the
- Free Software Foundation, Inc.,
- 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-/*
- Module: rt2x00rfkill
- Abstract: rt2x00 rfkill routines.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include "rt2x00.h"
-#include "rt2x00lib.h"
-
-static void rt2x00rfkill_poll(struct input_polled_dev *poll_dev)
-{
- struct rt2x00_dev *rt2x00dev = poll_dev->private;
- int state, old_state;
-
- if (!test_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state) ||
- !test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
- return;
-
- /*
- * Poll latest state, if the state is different then the previous state,
- * we should generate an input event.
- */
- state = !!rt2x00dev->ops->lib->rfkill_poll(rt2x00dev);
- old_state = !!test_bit(RFKILL_STATE_BLOCKED, &rt2x00dev->rfkill_state);
-
- if (old_state != state) {
- input_report_switch(poll_dev->input, SW_RFKILL_ALL, state);
- change_bit(RFKILL_STATE_BLOCKED, &rt2x00dev->rfkill_state);
- }
-}
-
-void rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev)
-{
- if (!test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state) ||
- test_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state))
- return;
-
- if (input_register_polled_device(rt2x00dev->rfkill_poll_dev)) {
- ERROR(rt2x00dev, "Failed to register polled device.\n");
- return;
- }
-
- __set_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state);
-
- /*
- * Force initial poll which will detect the initial device state,
- * and correctly sends the signal to the input layer about this
- * state.
- */
- rt2x00rfkill_poll(rt2x00dev->rfkill_poll_dev);
-}
-
-void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev)
-{
- if (!test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state) ||
- !test_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state))
- return;
-
- input_unregister_polled_device(rt2x00dev->rfkill_poll_dev);
-
- __clear_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state);
-}
-
-void rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev)
-{
- struct input_polled_dev *poll_dev;
-
- if (test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state) ||
- !test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
- return;
-
- poll_dev = input_allocate_polled_device();
- if (!poll_dev) {
- ERROR(rt2x00dev, "Failed to allocate polled device.\n");
- return;
- }
-
- poll_dev->private = rt2x00dev;
- poll_dev->poll = rt2x00rfkill_poll;
- poll_dev->poll_interval = RFKILL_POLL_INTERVAL;
-
- poll_dev->input->name = rt2x00dev->ops->name;
- poll_dev->input->phys = wiphy_name(rt2x00dev->hw->wiphy);
- poll_dev->input->id.bustype = BUS_HOST;
- poll_dev->input->id.vendor = 0x1814;
- poll_dev->input->id.product = rt2x00dev->chip.rt;
- poll_dev->input->id.version = rt2x00dev->chip.rev;
- poll_dev->input->dev.parent = wiphy_dev(rt2x00dev->hw->wiphy);
- poll_dev->input->evbit[0] = BIT(EV_SW);
- poll_dev->input->swbit[0] = BIT(SW_RFKILL_ALL);
-
- rt2x00dev->rfkill_poll_dev = poll_dev;
-
- __set_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state);
-}
-
-void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev)
-{
- if (!__test_and_clear_bit(RFKILL_STATE_ALLOCATED,
- &rt2x00dev->rfkill_state))
- return;
-
- input_free_polled_device(rt2x00dev->rfkill_poll_dev);
- rt2x00dev->rfkill_poll_dev = NULL;
-}
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 49b29ff..8a49d99 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -237,7 +237,6 @@ static const struct rt2x00debug rt61pci_rt2x00debug = {
};
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
-#ifdef CONFIG_RT2X00_LIB_RFKILL
static int rt61pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
@@ -245,9 +244,6 @@ static int rt61pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
rt2x00pci_register_read(rt2x00dev, MAC_CSR13, ®);
return rt2x00_get_field32(reg, MAC_CSR13_BIT5);
}
-#else
-#define rt61pci_rfkill_poll NULL
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
#ifdef CONFIG_RT2X00_LIB_LEDS
static void rt61pci_brightness_set(struct led_classdev *led_cdev,
@@ -2338,10 +2334,8 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
/*
* Detect if this device has an hardware controlled radio.
*/
-#ifdef CONFIG_RT2X00_LIB_RFKILL
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
/*
* Read frequency offset and RF programming sequence.
@@ -2728,6 +2722,7 @@ static const struct ieee80211_ops rt61pci_mac80211_ops = {
.conf_tx = rt61pci_conf_tx,
.get_tx_stats = rt2x00mac_get_tx_stats,
.get_tsf = rt61pci_get_tsf,
+ .rfkill_poll = rt2x00mac_rfkill_poll,
};
static const struct rt2x00lib_ops rt61pci_rt2x00_ops = {
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index c188488..ad2898c 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -183,7 +183,6 @@ static const struct rt2x00debug rt73usb_rt2x00debug = {
};
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
-#ifdef CONFIG_RT2X00_LIB_RFKILL
static int rt73usb_rfkill_poll(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
@@ -191,9 +190,6 @@ static int rt73usb_rfkill_poll(struct rt2x00_dev *rt2x00dev)
rt2x00usb_register_read(rt2x00dev, MAC_CSR13, ®);
return rt2x00_get_field32(reg, MAC_CSR13_BIT7);
}
-#else
-#define rt73usb_rfkill_poll NULL
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
#ifdef CONFIG_RT2X00_LIB_LEDS
static void rt73usb_brightness_set(struct led_classdev *led_cdev,
@@ -1863,10 +1859,8 @@ static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
/*
* Detect if this device has an hardware controlled radio.
*/
-#ifdef CONFIG_RT2X00_LIB_RFKILL
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
/*
* Read frequency offset.
@@ -2253,6 +2247,7 @@ static const struct ieee80211_ops rt73usb_mac80211_ops = {
.conf_tx = rt73usb_conf_tx,
.get_tx_stats = rt2x00mac_get_tx_stats,
.get_tsf = rt73usb_get_tsf,
+ .rfkill_poll = rt2x00mac_rfkill_poll,
};
static const struct rt2x00lib_ops rt73usb_rt2x00_ops = {
--
1.6.3.1
next reply other threads:[~2009-07-01 13:17 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-01 13:17 Ivo van Doorn [this message]
2009-07-01 15:05 ` [PATCH] rt2x00: use wiphy rfkill interface Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200907011517.35638.IvDoorn@gmail.com \
--to=ivdoorn@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=users@rt2x00.serialmonkey.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.