From: Johannes Berg <johannes@sipsolutions.net>
To: John Linville <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH 16/20 v4] cfg80211: implement iwpower
Date: Wed, 01 Jul 2009 21:26:57 +0200 [thread overview]
Message-ID: <20090701193421.266419695@sipsolutions.net> (raw)
In-Reply-To: 20090701192641.072258140@sipsolutions.net
Just on/off and timeout, and with a hacky cfg80211 method
until we figure out what we want, though this is probably
sufficient as we want to use pm_qos for wifi everywhere.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
---
drivers/net/wireless/iwmc3200wifi/cfg80211.c | 22 ++++++++
drivers/net/wireless/iwmc3200wifi/wext.c | 47 ------------------
include/net/cfg80211.h | 13 +++++
net/mac80211/Kconfig | 16 ------
net/mac80211/cfg.c | 26 ++++++++++
net/mac80211/mlme.c | 5 -
net/mac80211/wext.c | 70 ---------------------------
net/wireless/Kconfig | 16 ++++++
net/wireless/core.c | 11 +++-
net/wireless/wext-compat.c | 60 +++++++++++++++++++++++
10 files changed, 151 insertions(+), 135 deletions(-)
--- wireless-testing.orig/include/net/cfg80211.h 2009-07-01 19:57:56.000000000 +0200
+++ wireless-testing/include/net/cfg80211.h 2009-07-01 20:29:35.000000000 +0200
@@ -1023,6 +1023,10 @@ struct cfg80211_ops {
#ifdef CONFIG_NL80211_TESTMODE
int (*testmode_cmd)(struct wiphy *wiphy, void *data, int len);
#endif
+
+ /* some temporary stuff to finish wext */
+ int (*set_power_mgmt)(struct wiphy *wiphy, struct net_device *dev,
+ bool enabled, int timeout);
};
/*
@@ -1262,6 +1266,8 @@ struct wireless_dev {
u8 bssid[ETH_ALEN];
u8 ssid[IEEE80211_MAX_SSID_LEN];
s8 default_key, default_mgmt_key;
+ bool ps;
+ int ps_timeout;
} wext;
#endif
};
@@ -1606,6 +1612,13 @@ int cfg80211_wext_giwtxpower(struct net_
struct iw_request_info *info,
union iwreq_data *data, char *keybuf);
+int cfg80211_wext_siwpower(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *wrq, char *extra);
+int cfg80211_wext_giwpower(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *wrq, char *extra);
+
/*
* callbacks for asynchronous cfg80211 methods, notification
* functions and BSS handling helpers
--- wireless-testing.orig/net/mac80211/Kconfig 2009-07-01 19:31:59.000000000 +0200
+++ wireless-testing/net/mac80211/Kconfig 2009-07-01 20:29:35.000000000 +0200
@@ -14,22 +14,6 @@ config MAC80211
comment "CFG80211 needs to be enabled for MAC80211"
depends on CFG80211=n
-config MAC80211_DEFAULT_PS
- bool "enable powersave by default"
- depends on MAC80211
- default y
- help
- This option enables powersave mode by default.
-
- If this causes your applications to misbehave you should fix your
- applications instead -- they need to register their network
- latency requirement, see Documentation/power/pm_qos_interface.txt.
-
-config MAC80211_DEFAULT_PS_VALUE
- int
- default 1 if MAC80211_DEFAULT_PS
- default 0
-
menu "Rate control algorithm selection"
depends on MAC80211 != n
--- wireless-testing.orig/net/mac80211/wext.c 2009-07-01 19:57:56.000000000 +0200
+++ wireless-testing/net/mac80211/wext.c 2009-07-01 20:29:35.000000000 +0200
@@ -255,72 +255,6 @@ static int ieee80211_ioctl_giwrate(struc
return 0;
}
-static int ieee80211_ioctl_siwpower(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *wrq,
- char *extra)
-{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
- struct ieee80211_conf *conf = &local->hw.conf;
- int timeout = 0;
- bool ps;
-
- if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_PS))
- return -EOPNOTSUPP;
-
- if (sdata->vif.type != NL80211_IFTYPE_STATION)
- return -EINVAL;
-
- if (wrq->disabled) {
- ps = false;
- timeout = 0;
- goto set;
- }
-
- switch (wrq->flags & IW_POWER_MODE) {
- case IW_POWER_ON: /* If not specified */
- case IW_POWER_MODE: /* If set all mask */
- case IW_POWER_ALL_R: /* If explicitely state all */
- ps = true;
- break;
- default: /* Otherwise we ignore */
- return -EINVAL;
- }
-
- if (wrq->flags & ~(IW_POWER_MODE | IW_POWER_TIMEOUT))
- return -EINVAL;
-
- if (wrq->flags & IW_POWER_TIMEOUT)
- timeout = wrq->value / 1000;
-
- set:
- if (ps == sdata->u.mgd.powersave && timeout == conf->dynamic_ps_timeout)
- return 0;
-
- sdata->u.mgd.powersave = ps;
- conf->dynamic_ps_timeout = timeout;
-
- if (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)
- ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
-
- ieee80211_recalc_ps(local, -1);
-
- return 0;
-}
-
-static int ieee80211_ioctl_giwpower(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *extra)
-{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-
- wrqu->power.disabled = !sdata->u.mgd.powersave;
-
- return 0;
-}
-
/* Get wireless statistics. Called by /proc/net/wireless and by SIOCGIWSTATS */
static struct iw_statistics *ieee80211_get_wireless_stats(struct net_device *dev)
{
@@ -436,8 +370,8 @@ static const iw_handler ieee80211_handle
(iw_handler) cfg80211_wext_giwretry, /* SIOCGIWRETRY */
(iw_handler) cfg80211_wext_siwencode, /* SIOCSIWENCODE */
(iw_handler) cfg80211_wext_giwencode, /* SIOCGIWENCODE */
- (iw_handler) ieee80211_ioctl_siwpower, /* SIOCSIWPOWER */
- (iw_handler) ieee80211_ioctl_giwpower, /* SIOCGIWPOWER */
+ (iw_handler) cfg80211_wext_siwpower, /* SIOCSIWPOWER */
+ (iw_handler) cfg80211_wext_giwpower, /* SIOCGIWPOWER */
(iw_handler) NULL, /* -- hole -- */
(iw_handler) NULL, /* -- hole -- */
(iw_handler) cfg80211_wext_siwgenie, /* SIOCSIWGENIE */
--- wireless-testing.orig/net/wireless/Kconfig 2009-07-01 19:31:59.000000000 +0200
+++ wireless-testing/net/wireless/Kconfig 2009-07-01 20:29:35.000000000 +0200
@@ -26,6 +26,22 @@ config CFG80211_REG_DEBUG
If unsure, say N.
+config CFG80211_DEFAULT_PS
+ bool "enable powersave by default"
+ depends on CFG80211
+ default y
+ help
+ This option enables powersave mode by default.
+
+ If this causes your applications to misbehave you should fix your
+ applications instead -- they need to register their network
+ latency requirement, see Documentation/power/pm_qos_interface.txt.
+
+config CFG80211_DEFAULT_PS_VALUE
+ int
+ default 1 if CFG80211_DEFAULT_PS
+ default 0
+
config CFG80211_DEBUGFS
bool "cfg80211 DebugFS entries"
depends on CFG80211 && DEBUG_FS
--- wireless-testing.orig/net/wireless/core.c 2009-07-01 19:57:56.000000000 +0200
+++ wireless-testing/net/wireless/core.c 2009-07-01 20:29:35.000000000 +0200
@@ -550,12 +550,21 @@ static int cfg80211_netdev_notifier_call
}
wdev->netdev = dev;
wdev->sme_state = CFG80211_SME_IDLE;
+ mutex_unlock(&rdev->devlist_mtx);
#ifdef CONFIG_WIRELESS_EXT
wdev->wext.default_key = -1;
wdev->wext.default_mgmt_key = -1;
wdev->wext.connect.auth_type = NL80211_AUTHTYPE_AUTOMATIC;
+ wdev->wext.ps = CONFIG_CFG80211_DEFAULT_PS_VALUE;
+ wdev->wext.ps_timeout = 500;
+ if (rdev->ops->set_power_mgmt)
+ if (rdev->ops->set_power_mgmt(wdev->wiphy, dev,
+ wdev->wext.ps,
+ wdev->wext.ps_timeout)) {
+ /* assume this means it's off */
+ wdev->wext.ps = false;
+ }
#endif
- mutex_unlock(&rdev->devlist_mtx);
break;
case NETDEV_GOING_DOWN:
if (!wdev->ssid_len)
--- wireless-testing.orig/net/wireless/wext-compat.c 2009-07-01 19:57:56.000000000 +0200
+++ wireless-testing/net/wireless/wext-compat.c 2009-07-01 20:29:35.000000000 +0200
@@ -988,3 +988,63 @@ int cfg80211_wext_giwauth(struct net_dev
return -EOPNOTSUPP;
}
EXPORT_SYMBOL_GPL(cfg80211_wext_giwauth);
+
+int cfg80211_wext_siwpower(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *wrq, char *extra)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+ bool ps = wdev->wext.ps;
+ int timeout = wdev->wext.ps_timeout;
+ int err;
+
+ if (wdev->iftype != NL80211_IFTYPE_STATION)
+ return -EINVAL;
+
+ if (!rdev->ops->set_power_mgmt)
+ return -EOPNOTSUPP;
+
+ if (wrq->disabled) {
+ ps = false;
+ } else {
+ switch (wrq->flags & IW_POWER_MODE) {
+ case IW_POWER_ON: /* If not specified */
+ case IW_POWER_MODE: /* If set all mask */
+ case IW_POWER_ALL_R: /* If explicitely state all */
+ ps = true;
+ break;
+ default: /* Otherwise we ignore */
+ return -EINVAL;
+ }
+
+ if (wrq->flags & ~(IW_POWER_MODE | IW_POWER_TIMEOUT))
+ return -EINVAL;
+
+ if (wrq->flags & IW_POWER_TIMEOUT)
+ timeout = wrq->value / 1000;
+ }
+
+ err = rdev->ops->set_power_mgmt(wdev->wiphy, dev, ps, timeout);
+ if (err)
+ return err;
+
+ wdev->wext.ps = ps;
+ wdev->wext.ps_timeout = timeout;
+
+ return 0;
+
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_siwpower);
+
+int cfg80211_wext_giwpower(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *wrq, char *extra)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+
+ wrq->disabled = !wdev->wext.ps;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_giwpower);
--- wireless-testing.orig/net/mac80211/cfg.c 2009-07-01 19:31:59.000000000 +0200
+++ wireless-testing/net/mac80211/cfg.c 2009-07-01 20:29:35.000000000 +0200
@@ -1388,6 +1388,31 @@ int ieee80211_testmode_cmd(struct wiphy
}
#endif
+static int ieee80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev,
+ bool enabled, int timeout)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_conf *conf = &local->hw.conf;
+
+ if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_PS))
+ return -EOPNOTSUPP;
+
+ if (enabled == sdata->u.mgd.powersave &&
+ timeout == conf->dynamic_ps_timeout)
+ return 0;
+
+ sdata->u.mgd.powersave = enabled;
+ conf->dynamic_ps_timeout = timeout;
+
+ if (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)
+ ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
+
+ ieee80211_recalc_ps(local, -1);
+
+ return 0;
+}
+
struct cfg80211_ops mac80211_config_ops = {
.add_virtual_intf = ieee80211_add_iface,
.del_virtual_intf = ieee80211_del_iface,
@@ -1431,4 +1456,5 @@ struct cfg80211_ops mac80211_config_ops
.get_tx_power = ieee80211_get_tx_power,
.rfkill_poll = ieee80211_rfkill_poll,
CFG80211_TESTMODE_CMD(ieee80211_testmode_cmd)
+ .set_power_mgmt = ieee80211_set_power_mgmt,
};
--- wireless-testing.orig/net/mac80211/mlme.c 2009-07-01 19:57:56.000000000 +0200
+++ wireless-testing/net/mac80211/mlme.c 2009-07-01 20:29:35.000000000 +0200
@@ -2360,11 +2360,6 @@ void ieee80211_sta_setup_sdata(struct ie
ifmgd->flags |= IEEE80211_STA_WMM_ENABLED;
hw_flags = sdata->local->hw.flags;
-
- if (hw_flags & IEEE80211_HW_SUPPORTS_PS) {
- ifmgd->powersave = CONFIG_MAC80211_DEFAULT_PS_VALUE;
- sdata->local->hw.conf.dynamic_ps_timeout = 500;
- }
}
/* configuration hooks */
--- wireless-testing.orig/drivers/net/wireless/iwmc3200wifi/cfg80211.c 2009-07-01 19:31:59.000000000 +0200
+++ wireless-testing/drivers/net/wireless/iwmc3200wifi/cfg80211.c 2009-07-01 20:29:35.000000000 +0200
@@ -522,6 +522,27 @@ static int iwm_cfg80211_get_txpower(stru
return 0;
}
+static int iwm_cfg80211_set_power_mgmt(struct wiphy *wiphy,
+ struct net_device *dev,
+ bool enabled, int timeout)
+{
+ struct iwm_priv *iwm = wiphy_to_iwm(wiphy);
+ u32 power_index;
+
+ if (enabled)
+ power_index = IWM_POWER_INDEX_DEFAULT;
+ else
+ power_index = IWM_POWER_INDEX_MIN;
+
+ if (power_index == iwm->conf.power_index)
+ return 0;
+
+ iwm->conf.power_index = power_index;
+
+ return iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
+ CFG_POWER_INDEX, iwm->conf.power_index);
+}
+
static struct cfg80211_ops iwm_cfg80211_ops = {
.change_virtual_intf = iwm_cfg80211_change_iface,
.add_key = iwm_cfg80211_add_key,
@@ -534,6 +555,7 @@ static struct cfg80211_ops iwm_cfg80211_
.leave_ibss = iwm_cfg80211_leave_ibss,
.set_tx_power = iwm_cfg80211_set_txpower,
.get_tx_power = iwm_cfg80211_get_txpower,
+ .set_power_mgmt = iwm_cfg80211_set_power_mgmt,
};
struct wireless_dev *iwm_wdev_alloc(int sizeof_bus, struct device *dev)
--- wireless-testing.orig/drivers/net/wireless/iwmc3200wifi/wext.c 2009-07-01 19:31:59.000000000 +0200
+++ wireless-testing/drivers/net/wireless/iwmc3200wifi/wext.c 2009-07-01 20:29:35.000000000 +0200
@@ -238,49 +238,6 @@ static int iwm_set_wpa_version(struct iw
return 0;
}
-static int iwm_wext_siwpower(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *wrq, char *extra)
-{
- struct iwm_priv *iwm = ndev_to_iwm(dev);
- u32 power_index;
-
- if (wrq->disabled) {
- power_index = IWM_POWER_INDEX_MIN;
- goto set;
- } else
- power_index = IWM_POWER_INDEX_DEFAULT;
-
- switch (wrq->flags & IW_POWER_MODE) {
- case IW_POWER_ON:
- case IW_POWER_MODE:
- case IW_POWER_ALL_R:
- break;
- default:
- return -EINVAL;
- }
-
- set:
- if (power_index == iwm->conf.power_index)
- return 0;
-
- iwm->conf.power_index = power_index;
-
- return iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
- CFG_POWER_INDEX, iwm->conf.power_index);
-}
-
-static int iwm_wext_giwpower(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct iwm_priv *iwm = ndev_to_iwm(dev);
-
- wrqu->power.disabled = (iwm->conf.power_index == IWM_POWER_INDEX_MIN);
-
- return 0;
-}
-
static int iwm_set_key_mgt(struct iwm_priv *iwm, u8 key_mgt)
{
u8 *auth_type = &iwm->umac_profile->sec.auth_type;
@@ -458,8 +415,8 @@ static const iw_handler iwm_handlers[] =
(iw_handler) NULL, /* SIOCGIWRETRY */
(iw_handler) cfg80211_wext_siwencode, /* SIOCSIWENCODE */
(iw_handler) cfg80211_wext_giwencode, /* SIOCGIWENCODE */
- (iw_handler) iwm_wext_siwpower, /* SIOCSIWPOWER */
- (iw_handler) iwm_wext_giwpower, /* SIOCGIWPOWER */
+ (iw_handler) cfg80211_wext_siwpower, /* SIOCSIWPOWER */
+ (iw_handler) cfg80211_wext_giwpower, /* SIOCGIWPOWER */
(iw_handler) NULL, /* -- hole -- */
(iw_handler) NULL, /* -- hole -- */
(iw_handler) NULL, /* SIOCSIWGENIE */
--
next prev parent reply other threads:[~2009-07-01 19:36 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-01 19:26 [PATCH 00/20 v4] wireless patch dump Johannes Berg
2009-07-01 19:26 ` [PATCH 01/20 v4] wext: allow returning NULL stats Johannes Berg
2009-07-01 19:26 ` [PATCH 02/20 v4] mac80211: fix todo lock Johannes Berg
2009-07-01 19:26 ` [PATCH 03/20 v4] wext: default to y Johannes Berg
2009-07-01 19:26 ` [PATCH 04/20 v4] cfg80211: move break statement to correct place Johannes Berg
2009-07-01 19:26 ` [PATCH 05/20 v4] nl80211: clean up function definitions Johannes Berg
2009-07-01 19:26 ` [PATCH 06/20 v4] cfg80211: use proper allocation flags Johannes Berg
2009-07-01 19:26 ` [PATCH 07/20 v4] cfg80211: remove wireless_dev->bssid Johannes Berg
2009-07-01 19:26 ` [PATCH 08/20 v4] mac80211: tell SME about real auth state Johannes Berg
2009-07-01 19:26 ` [PATCH 09/20 v4] wext: constify extra argument to wireless_send_event Johannes Berg
2009-07-01 19:26 ` [PATCH 10/20 v4] cfg80211: introduce nl80211 testmode command Johannes Berg
2009-07-01 19:26 ` [PATCH 11/20 v4] mac80211: remove an unused function declaration Johannes Berg
2009-07-01 19:26 ` [PATCH 12/20 v4] wireless: define AKM suites Johannes Berg
2009-07-01 19:26 ` [PATCH 13/20 v4] cfg80211: connect/disconnect API Johannes Berg
2009-07-01 19:26 ` [PATCH 14/20 v4] cfg80211: emulate connect with auth/assoc Johannes Berg
2009-07-02 7:13 ` [PATCH 14/20 v4.1] " Johannes Berg
2009-07-01 19:26 ` [PATCH 15/20 v4] cfg80211: managed mode wext compatibility Johannes Berg
2009-07-02 23:55 ` [PATCH] iwmc3200wifi: cfg80211 managed mode port Samuel Ortiz
2009-07-03 8:02 ` Johannes Berg
2009-07-03 13:10 ` Samuel Ortiz
2009-07-05 1:37 ` Johannes Berg
2009-07-03 0:00 ` [PATCH] cfg80211: check for current_bss from giwrate Samuel Ortiz
2009-07-03 8:01 ` Johannes Berg
2009-07-01 19:26 ` Johannes Berg [this message]
2009-07-01 19:26 ` [PATCH 17/20 v4] cfg80211: implement IWAP for WDS Johannes Berg
2009-07-01 19:26 ` [PATCH 18/20 v4] cfg80211: implement IWRATE Johannes Berg
2009-07-01 19:27 ` [PATCH 19/20 v4] cfg80211: implement get_wireless_stats Johannes Berg
2009-07-01 19:27 ` [PATCH 20/20 v4] mac80211: re-add HT disabling Johannes Berg
2009-07-01 19:40 ` [PATCH 21/20 v4] mac80211: remove auth algorithm retry Johannes Berg
2009-07-01 19:41 ` [PATCH 22/20 v4] mac80211: remove dead code, clean up Johannes Berg
2009-07-02 7:58 ` [PATCH] cfg80211: send events for userspace SME Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090701193421.266419695@sipsolutions.net \
--to=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.