All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH/RFC 1/2]: arm: Kirkwood: Split PHY-related initialization to a common file
Date: Tue, 7 Jul 2009 22:37:53 +0200	[thread overview]
Message-ID: <20090707203753.GP30172@game.jcrosoft.org> (raw)
In-Reply-To: <20090702151937.6ad3a500@marrow.netinsight.se>

On 15:19 Thu 02 Jul     , Simon Kagstrom wrote:
> Split PHY-related initialization to a common file
> 
> The mv881116 PHY initialization is split out to a common file to enable
> code reuse between different boards.
please note if that will be share with non Marvell code this is not the right
place to store it
> 
> Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
> ---
>  board/Marvell/common/mv881116.c       |   65 +++++++++++++++++++++++++++++++++
>  board/Marvell/common/mv881116.h       |   29 +++++++++++++++
>  board/Marvell/sheevaplug/Makefile     |    2 +-
>  board/Marvell/sheevaplug/sheevaplug.c |   32 ++---------------
>  board/Marvell/sheevaplug/sheevaplug.h |    8 ----
>  5 files changed, 98 insertions(+), 38 deletions(-)
>  create mode 100644 board/Marvell/common/mv881116.c
>  create mode 100644 board/Marvell/common/mv881116.h
> 
> diff --git a/board/Marvell/common/mv881116.c b/board/Marvell/common/mv881116.c
> new file mode 100644
> index 0000000..9f5c7f1
> --- /dev/null
> +++ b/board/Marvell/common/mv881116.c
> @@ -0,0 +1,65 @@
> +/*
> + * (C) Copyright 2009
> + * Marvell Semiconductor <www.marvell.com>
> + * Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
> + *
as you just move code for an file to an other please let the original
Copyright header
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
<snip>
> diff --git a/board/Marvell/common/mv881116.h b/board/Marvell/common/mv881116.h
> new file mode 100644
> index 0000000..f1fe13f
> --- /dev/null
> +++ b/board/Marvell/common/mv881116.h
> @@ -0,0 +1,29 @@
> +/*
> + * (C) Copyright 2009
> + * Marvell Semiconductor <www.marvell.com>
> + * Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
> + *
same here

> diff --git a/board/Marvell/sheevaplug/Makefile b/board/Marvell/sheevaplug/Makefile
> index e378b5b..05c979d 100644
> --- a/board/Marvell/sheevaplug/Makefile
> +++ b/board/Marvell/sheevaplug/Makefile
> @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
>  
>  LIB	= $(obj)lib$(BOARD).a
>  
> -COBJS	:= sheevaplug.o
> +COBJS	:= sheevaplug.o ../common/mv881116.o
please create a common Makefile
>  
>  SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
>  OBJS	:= $(addprefix $(obj),$(COBJS))
> diff --git a/board/Marvell/sheevaplug/sheevaplug.c b/board/Marvell/sheevaplug/sheevaplug.c
> index 547126a..f018a46 100644
> --- a/board/Marvell/sheevaplug/sheevaplug.c
> +++ b/board/Marvell/sheevaplug/sheevaplug.c
> @@ -27,6 +27,7 @@
>  #include <asm/arch/kirkwood.h>
>  #include <asm/arch/mpp.h>
>  #include "sheevaplug.h"
> +#include "../common/mv881116.h"
Best Regards,
J.

  parent reply	other threads:[~2009-07-07 20:37 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-07-02 13:18 [U-Boot] [PATCH/RFC 0/2]: arm: Kirkwood: OpenRD base board support Simon Kagstrom
2009-07-02 13:19 ` [U-Boot] [PATCH/RFC 1/2]: arm: Kirkwood: Split PHY-related initialization to a common file Simon Kagstrom
2009-07-03  4:21   ` Prafulla Wadaskar
2009-07-07 20:37   ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2009-07-08  6:36     ` Prafulla Wadaskar
2009-07-08  6:43     ` Simon Kagstrom
2009-07-08  7:04       ` Prafulla Wadaskar
2009-07-02 13:20 ` [U-Boot] [PATCH/RFC 2/2]: arm: Kirkwood: Support for the OpenRD base board Simon Kagstrom
2009-07-03  4:14   ` Prafulla Wadaskar
2009-07-03  4:26 ` [U-Boot] [PATCH/RFC 0/2]: arm: Kirkwood: OpenRD base board support Prafulla Wadaskar
2009-07-07  8:35   ` Prafulla Wadaskar
2009-07-07  8:47     ` Simon Kagstrom

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090707203753.GP30172@game.jcrosoft.org \
    --to=plagnioj@jcrosoft.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.