All of lore.kernel.org
 help / color / mirror / Atom feed
From: "John W. Linville" <linville@tuxdriver.com>
To: davem@davemloft.net
Cc: linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: pull request: wireless-2.6 2009-07-08
Date: Wed, 8 Jul 2009 16:37:45 -0400	[thread overview]
Message-ID: <20090708203745.GK4253@tuxdriver.com> (raw)

Dave,

Here is a collection of bug fixes, build fixes, and minor hardware
enablement patches intended for 2.6.31.  I don't think there is anything
controversial.

Please let me know if there are problems!

Thanks,

John

---

Individual patches are available here:

	http://www.kernel.org/pub/linux/kernel/people/linville/wireless-2.6/

---

The following changes since commit 0ca1b08eba627b4245efd0f71b55a062bf163777:
  David S. Miller (1):
        Revert "p54: Use SKB list handling helpers instead of by-hand code."

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git master

Andrey Yurovsky (1):
      mac80211: fix allocation in mesh_queue_preq

Clyde McPherson (2):
      b43: Add support for 4318E
      ssb: Add support for 4318E

Hin-Tak Leung (1):
      zd1211rw: adding SONY IFU-WLM2 (054c:0257) as a zd1211b device

Jaswinder Singh Rajput (1):
      includecheck fix: include/linux, rfkill.h

Jay Sternberg (1):
      Atheros Kconfig needs to be dependent on WLAN_80211

Jiri Slaby (1):
      Wireless: nl80211, fix lock imbalance

Johannes Berg (4):
      hp-wmi: fix rfkill bug
      cfg80211: fix refcount leak
      mac80211_hwsim: avoid NULL access
      mac80211: fix docbook

Larry Finger (2):
      b43/b43legacy: fix radio LED initialization
      p54: tx refused but queue active

Luciano Coelho (1):
      mac80211: minstrel: avoid accessing negative indices in rix_to_ndx()

Pascal Terjan (1):
      zd1211rw: 07b8:6001 is a ZD1211B

Samuel Ortiz (1):
      iwmc3200wifi: add Kconfig help

Vasanthakumar Thiagarajan (1):
      ath9k: Fix leak in tx descriptor

 Documentation/DocBook/mac80211.tmpl        |    2 --
 drivers/net/wireless/ath/Kconfig           |    1 +
 drivers/net/wireless/ath/ath9k/xmit.c      |    9 ++++++++-
 drivers/net/wireless/b43/b43.h             |    1 +
 drivers/net/wireless/b43/main.c            |    7 +++++--
 drivers/net/wireless/b43/pcmcia.c          |    1 +
 drivers/net/wireless/b43legacy/b43legacy.h |    1 +
 drivers/net/wireless/b43legacy/main.c      |    7 +++++--
 drivers/net/wireless/iwmc3200wifi/Kconfig  |    9 +++++++++
 drivers/net/wireless/mac80211_hwsim.c      |    1 +
 drivers/net/wireless/p54/p54common.c       |    5 +++--
 drivers/net/wireless/zd1211rw/zd_usb.c     |    3 ++-
 drivers/platform/x86/hp-wmi.c              |    2 +-
 drivers/ssb/pcmcia.c                       |    6 ++++--
 include/linux/rfkill.h                     |    1 -
 net/mac80211/mesh_hwmp.c                   |    2 +-
 net/mac80211/rc80211_minstrel.c            |    5 ++++-
 net/wireless/nl80211.c                     |    1 +
 net/wireless/scan.c                        |    1 -
 19 files changed, 48 insertions(+), 17 deletions(-)

diff --git a/Documentation/DocBook/mac80211.tmpl b/Documentation/DocBook/mac80211.tmpl
index e369866..f3f37f1 100644
--- a/Documentation/DocBook/mac80211.tmpl
+++ b/Documentation/DocBook/mac80211.tmpl
@@ -184,8 +184,6 @@ usage should require reading the full document.
 !Finclude/net/mac80211.h ieee80211_ctstoself_get
 !Finclude/net/mac80211.h ieee80211_ctstoself_duration
 !Finclude/net/mac80211.h ieee80211_generic_frame_duration
-!Finclude/net/mac80211.h ieee80211_get_hdrlen_from_skb
-!Finclude/net/mac80211.h ieee80211_hdrlen
 !Finclude/net/mac80211.h ieee80211_wake_queue
 !Finclude/net/mac80211.h ieee80211_stop_queue
 !Finclude/net/mac80211.h ieee80211_wake_queues
diff --git a/drivers/net/wireless/ath/Kconfig b/drivers/net/wireless/ath/Kconfig
index d26e7b4..eb0337c 100644
--- a/drivers/net/wireless/ath/Kconfig
+++ b/drivers/net/wireless/ath/Kconfig
@@ -1,5 +1,6 @@
 config ATH_COMMON
 	tristate "Atheros Wireless Cards"
+	depends on WLAN_80211
 	depends on ATH5K || ATH9K || AR9170_USB
 
 source "drivers/net/wireless/ath/ath5k/Kconfig"
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index b61a071..4ccf48e 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -355,7 +355,14 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq,
 		}
 
 		if (bf_next == NULL) {
-			INIT_LIST_HEAD(&bf_head);
+			/*
+			 * Make sure the last desc is reclaimed if it
+			 * not a holding desc.
+			 */
+			if (!bf_last->bf_stale)
+				list_move_tail(&bf->list, &bf_head);
+			else
+				INIT_LIST_HEAD(&bf_head);
 		} else {
 			ASSERT(!list_empty(bf_q));
 			list_move_tail(&bf->list, &bf_head);
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index f580c28..4044806 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -648,6 +648,7 @@ struct b43_wl {
 	u8 nr_devs;
 
 	bool radiotap_enabled;
+	bool radio_enabled;
 
 	/* The beacon we are currently using (AP or IBSS mode).
 	 * This beacon stuff is protected by the irq_lock. */
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 6456afe..e71c8d9 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -3497,8 +3497,8 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
 	if (phy->ops->set_rx_antenna)
 		phy->ops->set_rx_antenna(dev, antenna);
 
-	if (!!conf->radio_enabled != phy->radio_on) {
-		if (conf->radio_enabled) {
+	if (wl->radio_enabled != phy->radio_on) {
+		if (wl->radio_enabled) {
 			b43_software_rfkill(dev, false);
 			b43info(dev->wl, "Radio turned on by software\n");
 			if (!dev->radio_hw_enable) {
@@ -4339,6 +4339,7 @@ static int b43_op_start(struct ieee80211_hw *hw)
 	wl->beacon0_uploaded = 0;
 	wl->beacon1_uploaded = 0;
 	wl->beacon_templates_virgin = 1;
+	wl->radio_enabled = 1;
 
 	mutex_lock(&wl->mutex);
 
@@ -4378,6 +4379,7 @@ static void b43_op_stop(struct ieee80211_hw *hw)
 	if (b43_status(dev) >= B43_STAT_STARTED)
 		b43_wireless_core_stop(dev);
 	b43_wireless_core_exit(dev);
+	wl->radio_enabled = 0;
 	mutex_unlock(&wl->mutex);
 
 	cancel_work_sync(&(wl->txpower_adjust_work));
@@ -4560,6 +4562,7 @@ static int b43_wireless_core_attach(struct b43_wldev *dev)
 		B43_WARN_ON(1);
 
 	dev->phy.gmode = have_2ghz_phy;
+	dev->phy.radio_on = 1;
 	tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0;
 	b43_wireless_core_reset(dev, tmp);
 
diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c
index 3cfc303..6c3a749 100644
--- a/drivers/net/wireless/b43/pcmcia.c
+++ b/drivers/net/wireless/b43/pcmcia.c
@@ -35,6 +35,7 @@
 
 static /*const */ struct pcmcia_device_id b43_pcmcia_tbl[] = {
 	PCMCIA_DEVICE_MANF_CARD(0x2D0, 0x448),
+	PCMCIA_DEVICE_MANF_CARD(0x2D0, 0x476),
 	PCMCIA_DEVICE_NULL,
 };
 
diff --git a/drivers/net/wireless/b43legacy/b43legacy.h b/drivers/net/wireless/b43legacy/b43legacy.h
index 77fda14..038baa8 100644
--- a/drivers/net/wireless/b43legacy/b43legacy.h
+++ b/drivers/net/wireless/b43legacy/b43legacy.h
@@ -607,6 +607,7 @@ struct b43legacy_wl {
 	u8 nr_devs;
 
 	bool radiotap_enabled;
+	bool radio_enabled;
 
 	/* The beacon we are currently using (AP or IBSS mode).
 	 * This beacon stuff is protected by the irq_lock. */
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index e5136fb..c4973c1 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -2689,8 +2689,8 @@ static int b43legacy_op_dev_config(struct ieee80211_hw *hw,
 	/* Antennas for RX and management frame TX. */
 	b43legacy_mgmtframe_txantenna(dev, antenna_tx);
 
-	if (!!conf->radio_enabled != phy->radio_on) {
-		if (conf->radio_enabled) {
+	if (wl->radio_enabled != phy->radio_on) {
+		if (wl->radio_enabled) {
 			b43legacy_radio_turn_on(dev);
 			b43legacyinfo(dev->wl, "Radio turned on by software\n");
 			if (!dev->radio_hw_enable)
@@ -3441,6 +3441,7 @@ static int b43legacy_op_start(struct ieee80211_hw *hw)
 	wl->beacon0_uploaded = 0;
 	wl->beacon1_uploaded = 0;
 	wl->beacon_templates_virgin = 1;
+	wl->radio_enabled = 1;
 
 	mutex_lock(&wl->mutex);
 
@@ -3479,6 +3480,7 @@ static void b43legacy_op_stop(struct ieee80211_hw *hw)
 	if (b43legacy_status(dev) >= B43legacy_STAT_STARTED)
 		b43legacy_wireless_core_stop(dev);
 	b43legacy_wireless_core_exit(dev);
+	wl->radio_enabled = 0;
 	mutex_unlock(&wl->mutex);
 }
 
@@ -3620,6 +3622,7 @@ static int b43legacy_wireless_core_attach(struct b43legacy_wldev *dev)
 		have_bphy = 1;
 
 	dev->phy.gmode = (have_gphy || have_bphy);
+	dev->phy.radio_on = 1;
 	tmp = dev->phy.gmode ? B43legacy_TMSLOW_GMODE : 0;
 	b43legacy_wireless_core_reset(dev, tmp);
 
diff --git a/drivers/net/wireless/iwmc3200wifi/Kconfig b/drivers/net/wireless/iwmc3200wifi/Kconfig
index 1eccb6d..030401d 100644
--- a/drivers/net/wireless/iwmc3200wifi/Kconfig
+++ b/drivers/net/wireless/iwmc3200wifi/Kconfig
@@ -4,6 +4,15 @@ config IWM
 	depends on CFG80211
 	select WIRELESS_EXT
 	select FW_LOADER
+	help
+	  The Intel Wireless Multicomm 3200 hardware is a combo
+	  card with GPS, Bluetooth, WiMax and 802.11 radios. It
+	  runs over SDIO and is typically found on Moorestown
+	  based platform. This driver takes care of the 802.11
+	  part, which is a fullmac one.
+
+	  If you choose to build it as a module, it'll be called
+	  iwmc3200wifi.ko.
 
 config IWM_DEBUG
 	bool "Enable full debugging output in iwmc3200wifi"
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index e789c6e..a111bda 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -418,6 +418,7 @@ static bool mac80211_hwsim_tx_frame(struct ieee80211_hw *hw,
 			continue;
 
 		if (!data2->started || !hwsim_ps_rx_ok(data2, skb) ||
+		    !data->channel || !data2->channel ||
 		    data->channel->center_freq != data2->channel->center_freq ||
 		    !(data->group & data2->group))
 			continue;
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index 48d81d9..22ca122 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -912,13 +912,14 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb)
 		}
 
 		__skb_unlink(entry, &priv->tx_queue);
-		spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
 
 		frame_len = entry->len;
 		entry_hdr = (struct p54_hdr *) entry->data;
 		entry_data = (struct p54_tx_data *) entry_hdr->data;
-		priv->tx_stats[entry_data->hw_queue].len--;
+		if (priv->tx_stats[entry_data->hw_queue].len)
+			priv->tx_stats[entry_data->hw_queue].len--;
 		priv->stats.dot11ACKFailureCount += payload->tries - 1;
+		spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
 
 		/*
 		 * Frames in P54_QUEUE_FWSCAN and P54_QUEUE_BEACON are
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index 14a19ba..0e6e446 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -38,7 +38,6 @@ static struct usb_device_id usb_ids[] = {
 	/* ZD1211 */
 	{ USB_DEVICE(0x0ace, 0x1211), .driver_info = DEVICE_ZD1211 },
 	{ USB_DEVICE(0x0ace, 0xa211), .driver_info = DEVICE_ZD1211 },
-	{ USB_DEVICE(0x07b8, 0x6001), .driver_info = DEVICE_ZD1211 },
 	{ USB_DEVICE(0x126f, 0xa006), .driver_info = DEVICE_ZD1211 },
 	{ USB_DEVICE(0x6891, 0xa727), .driver_info = DEVICE_ZD1211 },
 	{ USB_DEVICE(0x0df6, 0x9071), .driver_info = DEVICE_ZD1211 },
@@ -61,6 +60,7 @@ static struct usb_device_id usb_ids[] = {
 	{ USB_DEVICE(0x157e, 0x300a), .driver_info = DEVICE_ZD1211 },
 	{ USB_DEVICE(0x0105, 0x145f), .driver_info = DEVICE_ZD1211 },
 	/* ZD1211B */
+	{ USB_DEVICE(0x054c, 0x0257), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x0ace, 0x1215), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x0ace, 0xb215), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x157e, 0x300d), .driver_info = DEVICE_ZD1211B },
@@ -87,6 +87,7 @@ static struct usb_device_id usb_ids[] = {
 	{ USB_DEVICE(0x0471, 0x1237), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x07fa, 0x1196), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x0df6, 0x0036), .driver_info = DEVICE_ZD1211B },
+	{ USB_DEVICE(0x07b8, 0x6001), .driver_info = DEVICE_ZD1211B },
 	/* "Driverless" devices that need ejecting */
 	{ USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER },
 	{ USB_DEVICE(0x0ace, 0x20ff), .driver_info = DEVICE_INSTALLER },
diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index 4ac2311..ca50856 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -171,7 +171,7 @@ static int hp_wmi_tablet_state(void)
 static int hp_wmi_set_block(void *data, bool blocked)
 {
 	unsigned long b = (unsigned long) data;
-	int query = BIT(b + 8) | ((!!blocked) << b);
+	int query = BIT(b + 8) | ((!blocked) << b);
 
 	return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, query);
 }
diff --git a/drivers/ssb/pcmcia.c b/drivers/ssb/pcmcia.c
index fbfadba..d288608 100644
--- a/drivers/ssb/pcmcia.c
+++ b/drivers/ssb/pcmcia.c
@@ -678,7 +678,8 @@ int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
 			sprom->board_rev = tuple.TupleData[1];
 			break;
 		case SSB_PCMCIA_CIS_PA:
-			GOTO_ERROR_ON(tuple.TupleDataLen != 9,
+			GOTO_ERROR_ON((tuple.TupleDataLen != 9) &&
+				      (tuple.TupleDataLen != 10),
 				      "pa tpl size");
 			sprom->pa0b0 = tuple.TupleData[1] |
 				 ((u16)tuple.TupleData[2] << 8);
@@ -718,7 +719,8 @@ int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
 			sprom->antenna_gain.ghz5.a3 = tuple.TupleData[1];
 			break;
 		case SSB_PCMCIA_CIS_BFLAGS:
-			GOTO_ERROR_ON(tuple.TupleDataLen != 3,
+			GOTO_ERROR_ON((tuple.TupleDataLen != 3) &&
+				      (tuple.TupleDataLen != 5),
 				      "bfl tpl size");
 			sprom->boardflags_lo = tuple.TupleData[1] |
 					 ((u16)tuple.TupleData[2] << 8);
diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
index e73e242..2ce2983 100644
--- a/include/linux/rfkill.h
+++ b/include/linux/rfkill.h
@@ -99,7 +99,6 @@ enum rfkill_user_states {
 #undef RFKILL_STATE_UNBLOCKED
 #undef RFKILL_STATE_HARD_BLOCKED
 
-#include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/mutex.h>
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index 003cb47..f49ef28 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -637,7 +637,7 @@ static void mesh_queue_preq(struct mesh_path *mpath, u8 flags)
 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 	struct mesh_preq_queue *preq_node;
 
-	preq_node = kmalloc(sizeof(struct mesh_preq_queue), GFP_KERNEL);
+	preq_node = kmalloc(sizeof(struct mesh_preq_queue), GFP_ATOMIC);
 	if (!preq_node) {
 		printk(KERN_DEBUG "Mesh HWMP: could not allocate PREQ node\n");
 		return;
diff --git a/net/mac80211/rc80211_minstrel.c b/net/mac80211/rc80211_minstrel.c
index b218b98..37771ab 100644
--- a/net/mac80211/rc80211_minstrel.c
+++ b/net/mac80211/rc80211_minstrel.c
@@ -66,7 +66,7 @@ rix_to_ndx(struct minstrel_sta_info *mi, int rix)
 	for (i = rix; i >= 0; i--)
 		if (mi->r[i].rix == rix)
 			break;
-	WARN_ON(mi->r[i].rix != rix);
+	WARN_ON(i < 0);
 	return i;
 }
 
@@ -181,6 +181,9 @@ minstrel_tx_status(void *priv, struct ieee80211_supported_band *sband,
 			break;
 
 		ndx = rix_to_ndx(mi, ar[i].idx);
+		if (ndx < 0)
+			continue;
+
 		mi->r[ndx].attempts += ar[i].count;
 
 		if ((i != IEEE80211_TX_MAX_RATES - 1) && (ar[i + 1].idx < 0))
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 241bddd..43bdb13 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -447,6 +447,7 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
 
 	rdev = __cfg80211_drv_from_info(info);
 	if (IS_ERR(rdev)) {
+		mutex_unlock(&cfg80211_mutex);
 		result = PTR_ERR(rdev);
 		goto unlock;
 	}
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index e95b638..f8e71b3 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -366,7 +366,6 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev,
 	found = rb_find_bss(dev, res);
 
 	if (found) {
-		kref_get(&found->ref);
 		found->pub.beacon_interval = res->pub.beacon_interval;
 		found->pub.tsf = res->pub.tsf;
 		found->pub.signal = res->pub.signal;
-- 
John W. Linville		Someday the world will need a hero, and you
linville@tuxdriver.com			might be all we have.  Be ready.
			¡Viva Honduras Libre!

             reply	other threads:[~2009-07-08 21:00 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-07-08 20:37 John W. Linville [this message]
2009-07-09  1:14 ` pull request: wireless-2.6 2009-07-08 David Miller
2009-07-09  1:14   ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090708203745.GK4253@tuxdriver.com \
    --to=linville@tuxdriver.com \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.