[U-Boot] [PATCH 02/03 v3] Add support for Olimex SAM9-L9261 SBC

[Dimitar Dimitrov <dinuxbg@gmail.com>]

The SAM9-L9261 board support is based on code for AT91SAM9261EK. Networking
is missing and will be added after the DM9000 support for AT91 boards is
fixed to comply with U-Boot guide-lines.
---
 MAINTAINERS                          |    3 +
 MAKEALL                              |    1 +
 Makefile                             |   17 +++
 board/olimex/sam9_l9261/Makefile     |   56 ++++++++
 board/olimex/sam9_l9261/config.mk    |    1 +
 board/olimex/sam9_l9261/led.c        |   43 +++++++
 board/olimex/sam9_l9261/partition.c  |   40 ++++++
 board/olimex/sam9_l9261/sam9_l9261.c |  214 +++++++++++++++++++++++++++++++
 include/configs/sam9_l9261.h         |  230 ++++++++++++++++++++++++++++++++++
 tools/Makefile                       |    3 +
 tools/logos/olimex.bmp               |  Bin 0 -> 27510 bytes
 11 files changed, 608 insertions(+), 0 deletions(-)
 create mode 100644 board/olimex/sam9_l9261/Makefile
 create mode 100644 board/olimex/sam9_l9261/config.mk
 create mode 100644 board/olimex/sam9_l9261/led.c
 create mode 100644 board/olimex/sam9_l9261/partition.c
 create mode 100644 board/olimex/sam9_l9261/sam9_l9261.c
 create mode 100644 include/configs/sam9_l9261.h
 create mode 100644 tools/logos/olimex.bmp

diff --git a/MAINTAINERS b/MAINTAINERS
index 575a7ec..dfcccf5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -133,6 +133,9 @@ Jon Diekema <jon.diekema@smiths-aerospace.com>
 
 	sbc8260		MPC8260
 
+Dimitar Dimitrov <dinuxbg@gmail.com>
+	sam9_l9261	AT91SAM9261
+
 Dirk Eibach <eibach@gdsys.de>
 
 	gdppc440etx	PPC440EP/GR
diff --git a/MAKEALL b/MAKEALL
index 020ff73..ecabfcf 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -599,6 +599,7 @@ LIST_at91="			\
 	m501sk			\
 	pm9261			\
 	pm9263			\
+	sam9_l9261		\
 "
 
 #########################################################################
diff --git a/Makefile b/Makefile
index 090e645..b19c3b0 100644
--- a/Makefile
+++ b/Makefile
@@ -2847,6 +2847,23 @@ at91sam9g45ekes_config	:	unconfig
 pm9263_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
 
+sam9_l9261_nandflash_config \
+sam9_l9261_dataflash_cs0_config \
+sam9_l9261_dataflash_cs3_config \
+sam9_l9261_config	:	unconfig
+	@mkdir -p $(obj)include
+	@if [ "$(findstring _nandflash,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in NAND FLASH" ; \
+	elif [ "$(findstring dataflash_cs3,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \
+	else \
+		echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+	fi;
+	@$(MKCONFIG) -a sam9_l9261 arm arm926ejs sam9_l9261 olimex  at91
+
 ########################################################################
 ## ARM Integrator boards - see doc/README-integrator for more info.
 integratorap_config	\
diff --git a/board/olimex/sam9_l9261/Makefile b/board/olimex/sam9_l9261/Makefile
new file mode 100644
index 0000000..3a1e163
--- /dev/null
+++ b/board/olimex/sam9_l9261/Makefile
@@ -0,0 +1,56 @@
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian.pop@leadtechdesign.com>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS-y += sam9_l9261.o
+COBJS-y += led.o
+COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/olimex/sam9_l9261/config.mk b/board/olimex/sam9_l9261/config.mk
new file mode 100644
index 0000000..ff2cfd1
--- /dev/null
+++ b/board/olimex/sam9_l9261/config.mk
@@ -0,0 +1 @@
+TEXT_BASE = 0x23f00000
diff --git a/board/olimex/sam9_l9261/led.c b/board/olimex/sam9_l9261/led.c
new file mode 100644
index 0000000..5d1c5f2
--- /dev/null
+++ b/board/olimex/sam9_l9261/led.c
@@ -0,0 +1,43 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9261.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+void coloured_LED_init(void)
+{
+	/* Enable clock */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOA);
+
+	at91_set_gpio_output(CONFIG_RED_LED, 1);
+	at91_set_gpio_output(CONFIG_GREEN_LED, 1);
+	at91_set_gpio_output(CONFIG_YELLOW_LED, 1);
+
+	at91_set_gpio_value(CONFIG_RED_LED, 0);
+	at91_set_gpio_value(CONFIG_GREEN_LED, 1);
+	at91_set_gpio_value(CONFIG_YELLOW_LED, 1);
+}
diff --git a/board/olimex/sam9_l9261/partition.c b/board/olimex/sam9_l9261/partition.c
new file mode 100644
index 0000000..c739b11
--- /dev/null
+++ b/board/olimex/sam9_l9261/partition.c
@@ -0,0 +1,40 @@
+/*
+ * (C) Copyright 2008
+ * Ulf Samuelsson <ulf@atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+#include <common.h>
+#include <config.h>
+#include <asm/hardware.h>
+#include <dataflash.h>
+
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
+
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
+	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
+	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3, 3}
+};
+
+/*define the area offsets*/
+dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
+	{0x00000000, 0x000041FF, FLAG_PROTECT_SET,   0, "Bootstrap"},
+	{0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
+	{0x00008400, 0x00041FFF, FLAG_PROTECT_SET,   0, "U-Boot"},
+	{0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0,	"Kernel"},
+	{0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0,	"FS"},
+};
diff --git a/board/olimex/sam9_l9261/sam9_l9261.c b/board/olimex/sam9_l9261/sam9_l9261.c
new file mode 100644
index 0000000..3880204
--- /dev/null
+++ b/board/olimex/sam9_l9261/sam9_l9261.c
@@ -0,0 +1,214 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9261.h>
+#include <asm/arch/at91sam9261_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+#include <lcd.h>
+#include <atmel_lcdc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+#ifdef CONFIG_CMD_NAND
+static void at91sam9261_nand_hw_init(void)
+{
+	unsigned long csa;
+
+	/* Enable CS3 */
+	csa = at91_sys_read(AT91_MATRIX_EBICSA);
+	at91_sys_write(AT91_MATRIX_EBICSA,
+		       csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+
+	/* Configure SMC CS3 for NAND/SmartMedia */
+	at91_sys_write(AT91_SMC_SETUP(3),
+		       AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
+		       AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
+	at91_sys_write(AT91_SMC_PULSE(3),
+		       AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
+		       AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
+	at91_sys_write(AT91_SMC_CYCLE(3),
+		       AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
+	at91_sys_write(AT91_SMC_MODE(3),
+		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+		       AT91_SMC_EXNWMODE_DISABLE |
+#ifdef CONFIG_SYS_NAND_DBW_16
+		       AT91_SMC_DBW_16 |
+#else /* CONFIG_SYS_NAND_DBW_8 */
+		       AT91_SMC_DBW_8 |
+#endif
+		       AT91_SMC_TDF_(2));
+
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOC);
+
+	/* Configure RDY/BSY */
+	at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+
+	/* Enable NandFlash */
+	at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+	at91_set_gpio_output(AT91_PIN_PC14, 1);
+
+	at91_set_A_periph(AT91_PIN_PC0, 0);	/* NANDOE */
+	at91_set_A_periph(AT91_PIN_PC1, 0);	/* NANDWE */
+}
+#endif
+
+#ifdef CONFIG_LCD
+vidinfo_t panel_info = {
+	vl_col:		320,
+	vl_row:		240,
+	vl_clk:		4965000,
+	vl_sync:	0 /*ATMEL_LCDC_INVLINE_INVERTED |
+			ATMEL_LCDC_INVFRAME_INVERTED */,
+	vl_bpix:	3,
+	vl_tft:		1,
+	vl_hsync_len:	30,
+	vl_left_margin:	20,
+	vl_right_margin:38,
+	vl_vsync_len:	3,
+	vl_upper_margin:4,
+	vl_lower_margin:15,
+	mmio:		AT91SAM9261_LCDC_BASE,
+};
+
+void lcd_enable(void)
+{
+	at91_set_gpio_output(AT91_PIN_PA12, 0);  /* power up */
+}
+
+void lcd_disable(void)
+{
+	at91_set_gpio_output(AT91_PIN_PA12, 1);  /* power down */
+}
+
+static void at91sam9261_lcd_hw_init(void)
+{
+	at91_set_A_periph(AT91_PIN_PB0, 0);	/* LCDVSYNC */
+	at91_set_A_periph(AT91_PIN_PB1, 0);	/* LCDHSYNC */
+	at91_set_A_periph(AT91_PIN_PB2, 0);	/* LCDDOTCK */
+	at91_set_A_periph(AT91_PIN_PB3, 0);	/* LCDDEN */
+
+	at91_set_A_periph(AT91_PIN_PB5, 0);	/* LCDD R0 */
+	at91_set_A_periph(AT91_PIN_PB6, 0);	/* LCDD R1 */
+	at91_set_A_periph(AT91_PIN_PB7, 0);	/* LCDD R2 */
+	at91_set_A_periph(AT91_PIN_PB8, 0);	/* LCDD R3 */
+	at91_set_A_periph(AT91_PIN_PB9, 0);	/* LCDD R4 */
+	at91_set_A_periph(AT91_PIN_PB10, 0);	/* LCDD R5 */
+	at91_set_A_periph(AT91_PIN_PB11, 0);	/* LCDD R6 */
+	at91_set_A_periph(AT91_PIN_PB12, 0);	/* LCDD R7 */
+
+	at91_set_A_periph(AT91_PIN_PB13, 0);	/* LCDD G0 */
+	at91_set_A_periph(AT91_PIN_PB14, 0);	/* LCDD G1 */
+	at91_set_A_periph(AT91_PIN_PB15, 0);	/* LCDD G2 */
+	at91_set_A_periph(AT91_PIN_PB16, 0);	/* LCDD G3 */
+	at91_set_A_periph(AT91_PIN_PB17, 0);	/* LCDD G4 */
+	at91_set_A_periph(AT91_PIN_PB18, 0);	/* LCDD G5 */
+	at91_set_A_periph(AT91_PIN_PB19, 0);	/* LCDD G6 */
+	at91_set_A_periph(AT91_PIN_PB20, 0);	/* LCDD G7 */
+
+	at91_set_B_periph(AT91_PIN_PB21, 0);	/* LCDD B0 */
+	at91_set_B_periph(AT91_PIN_PB22, 0);	/* LCDD B1 */
+	at91_set_B_periph(AT91_PIN_PB23, 0);	/* LCDD B2 */
+	at91_set_B_periph(AT91_PIN_PB24, 0);	/* LCDD B3 */
+	at91_set_B_periph(AT91_PIN_PB25, 0);	/* LCDD B4 */
+	at91_set_B_periph(AT91_PIN_PB26, 0);	/* LCDD B5 */
+	at91_set_B_periph(AT91_PIN_PB27, 0);	/* LCDD B6 */
+	at91_set_B_periph(AT91_PIN_PB28, 0);	/* LCDD B7 */
+
+	at91_sys_write(AT91_PMC_SCER, AT91_PMC_HCK1);
+
+	gd->fb_base = AT91SAM9261_SRAM_BASE;
+}
+
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+
+void lcd_show_board_info(void)
+{
+	ulong dram_size, nand_size;
+	int i;
+	char temp[32];
+
+	lcd_printf ("%s\n", U_BOOT_VERSION);
+	lcd_printf ("(C) 2009 Olimex Ltd\n");
+	lcd_printf ("support at olimex.com\n");
+	lcd_printf ("%s CPU at %s MHz\n",
+		AT91_CPU_NAME,
+		strmhz(temp, get_cpu_clk_rate()));
+
+	dram_size = 0;
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+		dram_size += gd->bd->bi_dram[i].size;
+	nand_size = 0;
+	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+		nand_size += nand_info[i].size;
+	lcd_printf ("  %ld MB SDRAM, %ld MB NAND\n",
+		dram_size >> 20,
+		nand_size >> 20 );
+}
+#endif /* CONFIG_LCD_INFO */
+#endif
+
+int board_init(void)
+{
+	/* Enable Ctrlc */
+	console_init_f();
+
+	/* arch number of AT91SAM9261EK-Board */
+	gd->bd->bi_arch_number = MACH_TYPE_SAM9_L9261;
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+	at91_serial_hw_init();
+#ifdef CONFIG_CMD_NAND
+	at91sam9261_nand_hw_init();
+#endif
+#ifdef CONFIG_HAS_DATAFLASH
+	at91_spi0_hw_init(1 << 0);
+#endif
+#ifdef CONFIG_LCD
+	at91sam9261_lcd_hw_init();
+#endif
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+	return 0;
+}
+
diff --git a/include/configs/sam9_l9261.h b/include/configs/sam9_l9261.h
new file mode 100644
index 0000000..5cc550a
--- /dev/null
+++ b/include/configs/sam9_l9261.h
@@ -0,0 +1,230 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * Configuation settings for the SAM9-L9261 board, based on the
+ * AT91SAM9261EK board configuration.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* ARM asynchronous clock */
+#define AT91_CPU_NAME		"AT91SAM9261"
+#define AT91_MAIN_CLOCK		18432000	/* 18.432 MHz crystal */
+#define CONFIG_SYS_HZ		1000
+
+#define CONFIG_ARM926EJS	1	/* This is an ARM926EJS Core	*/
+#define CONFIG_AT91SAM9261	1	/* It's an Atmel AT91SAM9261 SoC*/
+#define CONFIG_SAM9_L9261	1	/* on an SAM9_L9261 Board	*/
+#define CONFIG_ARCH_CPU_INIT
+#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
+
+#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG	1
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_ATMEL_USART	1
+#undef CONFIG_USART0
+#undef CONFIG_USART1
+#undef CONFIG_USART2
+#define CONFIG_USART3		1	/* USART 3 is DBGU */
+
+/* LCD */
+#define CONFIG_LCD			1
+#define LCD_BPP				LCD_COLOR8
+#define CONFIG_LCD_LOGO			1
+#undef LCD_TEST_PATTERN
+#define CONFIG_LCD_INFO			1
+#define CONFIG_LCD_INFO_BELOW_LOGO	1
+#define CONFIG_LCD_INVERTED_CLOCK	1
+#define CONFIG_SYS_WHITE_ON_BLACK	1
+#define CONFIG_ATMEL_LCD		1
+#define CONFIG_ATMEL_LCD_BGR555		1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
+
+/* LED */
+#define CONFIG_AT91_LED
+#define	CONFIG_RED_LED		AT91_PIN_PA23	/* this is the power led */
+#define	CONFIG_GREEN_LED	AT91_PIN_PA13	/* this is the user1 led */
+#define	CONFIG_YELLOW_LED	AT91_PIN_PA14	/* this is the user2 led */
+
+#define CONFIG_BOOTDELAY	3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE	1
+#define CONFIG_BOOTP_BOOTPATH		1
+#define CONFIG_BOOTP_GATEWAY		1
+#define CONFIG_BOOTP_HOSTNAME		1
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
+
+#define CONFIG_CMD_PING		1
+#define CONFIG_CMD_DHCP		1
+#define CONFIG_CMD_NAND		1
+#define CONFIG_CMD_USB		1
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS		1
+#define PHYS_SDRAM			0x20000000
+#define PHYS_SDRAM_SIZE			0x04000000	/* 64 megs */
+
+/* DataFlash */
+#define CONFIG_ATMEL_DATAFLASH_SPI
+#define CONFIG_HAS_DATAFLASH		1
+#define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
+#define CONFIG_SYS_MAX_DATAFLASH_BANKS		2
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3	0xD0000000	/* CS3 */
+#define AT91_SPI_CLK			15000000
+#define DATAFLASH_TCSS			(0x1a << 16)
+#define DATAFLASH_TCHS			(0x1 << 24)
+
+/* NAND flash */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE		1
+#define CONFIG_SYS_NAND_BASE			0x40000000
+#define CONFIG_SYS_NAND_DBW_8			1
+/* our ALE is AD22 */
+#define CONFIG_SYS_NAND_MASK_ALE		(1 << 22)
+/* our CLE is AD21 */
+#define CONFIG_SYS_NAND_MASK_CLE		(1 << 21)
+#define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
+#define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC15
+#endif
+
+/* NOR flash - no real flash on this board */
+#define CONFIG_SYS_NO_FLASH			1
+
+/* Ethernet */
+#define CONFIG_NET_MULTI		1
+#define CONFIG_DRIVER_DM9000		1
+#define CONFIG_DM9000_BASE		0x30000000
+#define DM9000_IO			CONFIG_DM9000_BASE
+#define DM9000_DATA			(CONFIG_DM9000_BASE + 4)
+#define CONFIG_DM9000_USE_16BIT		1
+#define CONFIG_DM9000_NO_SROM		1
+#define CONFIG_NET_RETRY_COUNT		20
+
+/* USB */
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_OHCI_NEW		1
+#define CONFIG_DOS_PARTITION		1
+#define CONFIG_SYS_USB_OHCI_CPU_INIT		1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00500000
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9261"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
+#define CONFIG_USB_STORAGE		1
+#define CONFIG_CMD_FAT			1
+
+#define CONFIG_SYS_LOAD_ADDR			0x22000000
+
+#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END			0x23e00000
+
+#ifdef CONFIG_SYS_USE_DATAFLASH_CS0
+
+/* bootstrap + u-boot + env + linux in dataflash on CS0 */
+#define CONFIG_ENV_IS_IN_DATAFLASH	1
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
+#define CONFIG_ENV_OFFSET	0x4200
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE		0x4200
+#define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
+				"root=/dev/mtdblock0 "			\
+				"mtdparts=at91_nand:-(root) "		\
+				"rw rootfstype=jffs2"
+
+#elif CONFIG_SYS_USE_DATAFLASH_CS3
+
+/* bootstrap + u-boot + env + linux in dataflash on CS3 */
+#define CONFIG_ENV_IS_IN_DATAFLASH	1
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 + 0x8400)
+#define CONFIG_ENV_OFFSET	0x4200
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE		0x4200
+#define CONFIG_BOOTCOMMAND	"cp.b 0xD0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
+				"root=/dev/mtdblock0 "			\
+				"mtdparts=at91_nand:-(root) "		\
+				"rw rootfstype=jffs2"
+
+#else /* CONFIG_SYS_USE_NANDFLASH */
+
+/* bootstrap + u-boot + env + linux in nandflash */
+#define CONFIG_ENV_IS_IN_NAND	1
+#define CONFIG_ENV_OFFSET		0x60000
+#define CONFIG_ENV_OFFSET_REDUND	0x80000
+#define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
+#define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
+				"root=/dev/mtdblock5 "			\
+				"mtdparts=at91_nand:128k(bootstrap)ro,"	\
+				"256k(uboot)ro,128k(env1)ro,"		\
+				"128k(env2)ro,2M(linux),-(root) "	\
+				"rw rootfstype=jffs2"
+
+#endif
+
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
+
+#define CONFIG_SYS_PROMPT		"U-Boot> "
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP		1
+#define CONFIG_CMDLINE_EDITING	1
+
+#define ROUND(A, B)		(((A) + (B)) & ~((B) - 1))
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* 128 bytes for initial data */
+
+#define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif
diff --git a/tools/Makefile b/tools/Makefile
index 43c284c..c56c56a 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -122,6 +122,9 @@ endif
 ifeq ($(VENDOR),atmel)
 LOGO_BMP= logos/atmel.bmp
 endif
+ifeq ($(VENDOR),olimex)
+LOGO_BMP= logos/olimex.bmp
+endif
 ifeq ($(VENDOR),ronetix)
 LOGO_BMP= logos/ronetix.bmp
 endif
diff --git a/tools/logos/olimex.bmp b/tools/logos/olimex.bmp
new file mode 100644
index 0000000000000000000000000000000000000000..a787d71dd6b9da0f3122d0cce16845bf18e04610
GIT binary patch
literal 27510
zcmeI0J8~w)7KDGn5J3bUHVeRH4fyN<d+@PYu2z66>UB=$c~y5yNX!JS%c!$5zdTi4
z`e)|CufP5I$76i`-M;_ae*N_Hc>La;Pmk~0_s8R}&yUBCKg?ghv~~aW^77KZ%Ri6j
z=jXQmdcL04*EjO@?fTMJ`0juEb>B_>qrdOwzMJ|6>g4|1+;>yoK%Ly5oBM9+8>kcg
zzcIJCZ{WUx`v&eCxNqRTf%^vT8 at O-a?KdF*T0)b=YX9-@<d-&{&Ua3Z9+=F((s?^8
zyY}at#?Hw%eMRNU$!Yv?jbN7BB7>Fg16;P9xx%B0%XxWu{9%Eov)&b%t90-CY&Uad
z2NfTi_3?Ov%ZIzHIhvMbCA>0~AbTCFsp^rM>?=NXYn at UF$8Ud|d)BOr4Ggnc#H-mJ
zW$hLQ at +m^-4Tcl#@!f#}YmH=j^1`<Bq#qWbs?veRlwn%o<4d at Cnqgrf#THB%2pGav
zPmoX*E52;oUTRsrOA at 1^!VqcD-AK57#+l?uvsqJ8=A@wY(-m~)z9IX{6SX+cIx-gx
z+>K-hPdm`Aq^jd>jFo`fC-9-RY!5rNpePRiVvuSdBU_DqX)S*FltO&QN at Ru;!PK$s
z6fq{hlmy{D?NDBYihOP)IPv6ptdlCoq!Ti=sG{$fg5Ja}X~MG#t?Uwld4IQ-j(sK#
z3+O5#3rj24u7-bK$YhKvm7wdnIOiTMv*}qU<F37>PRPcWUT at h@=WK=Ttlv`3JY2>d
z(n`dd<4DgGv9<T5nVN<#<ZDxrKW*HBW7D?cANoG;>o{dN7LAb2Wr}q}i(?5hPqO^U
z4cXZJFtehmwS{GT8UVr#OTI{x>qf>El%EQ~RLh+fgjZ-#g-mj}%0$<@%*BklAA=bq
zoY`ub><M@DMCXW<91S{HYD!~12^kWpPiQV6RZOdCMS_rJ+06=_4P+uT=p9ni)cg+|
zpB(B=>3VL-xQk?&AY=)3_(bOrT>u&v at 5cRsEtf;{x;#7v at fAym%p<F61s|Od6$Toz
zZv#^^3?OPqTbyYqd4q=dNY;eN8Oajr@QKbLx&Sm}-xj21oJd$MV<k9L4B0XWku#E2
zwStdMi256+rgo63l~z)YDk=fiO5u7dLgWp|N=G9{oOvTX5y-xc2Tdk+fg&)G;A%y+
z3L->~Lsr^CjyUsr3g7>DD9OgiVUSrx^&l--tf*BG+2M~`$T2kYS_-=>;5LF!JWNqD
zv at 0rz6yV?~czaePA;OTAwvZ#vJbyJZf40ydKQ-4blF6pBc29|qo>Z$)Lgb8Or7h%$
zGtYf$8Uo(j8*Gd*Yy&8fh%IOg+bc9=Uf>B4hOB^h13BW%BXGswd5Y|7Mw8iFnBUc!
zW6il*(eZ=I6--F7W!gdoapvg at HEibK#Th<qjM=Nzh!92{De6`zA at 6lJee1amAA&Z9
zP3B&%iia at iP*JsF3Hb`|Mn9VKHL91)e0uRL?j9lUbvJG9+Jz568^b0ulR8L_isn^i
z#usH~7D859LXJ4|<VMnr!)y#nP@P*VR9>erw5wtULkl4*Eg?sodGa1<#$h%FC8*A=
z6)LY&7&=rwgrP-{m3ELL&OCXKG~+NEgA!Ed)(Vx^DGVJdAHvWg$VxlN5oeyhh=jnK
z60<$wlew2tv6Q&SPurstaFwCulf|TJ<Z98I!fOg>QzqdEf#G+HRq+TW9jH~56XrBe
zj~k{PR1jxgPvN_($rHl2a%~(LoM^9RQxBNKJbn>mr5)smGjF6P0=hNOTNMwgIF7Vc
zlW&NM1lOTWteC8%AmciP7#(;+oe0t~WcE22gKdqc3%7r<RD6n at VrUU$r5)smGjF6P
z0=fp!WX@d>tzBVQg+pzWt%S||mijTEUOF8);>;WAiGWT9noR7%iclw+s`RM}Lu(LO
z>1gDLGjF6P0=fp!WMUUmL<UJ%DNU)Mm{|x}X$d*v%p2*6fUW^Fnb-x2z(j&8m1z|e
zGYcUrEg?soc_Td$&^3T26T7G)E|m(_f_fE1h#ZHkw1pgT=8d!r=&zn^j2s3TDGaR?
z!G)w|LC^``<<DX|fqz>>I2$}qgK>YM_eyGUBhe?eB1DcuRx*>%ffyZlO~LNUM3liN
z9;R0WP1%9e^i5uKfql{mLKcCL$oF16F!-kSW86hj6TPKoR at hXu((pEt6(h?dODOY1
z4m<Pc?IlLx)psMK^eHpd5FtVS6ly**#t;i2FRRciBSt6lkkZEiW>JAn3azD(Z6ZLb
z9Id_z3oM&V1z8}6n|QE{(hgj;=-PV<UlmGAY0^XphrtAC4^uRx%_SvQEPhgq)3bS5
z>-5V_9AM1I`#RnV5ARaVsH7eQrA>-&-HR(3QvKxXacEAJlb%}Z9L`(}pcJMk3WvPB
zj~~$1GP^yKbYoF*caDfnXEWJE)F+?ZB`F-Tusyb2^DbM^h1?VEkhzr5KT|lE+ at g@}
zp(&ek5y5ApF}w`g>=M$_Fg0CdxQ1S2u=h-dLgV*^WU3Y+e)b$l7KpcIoERmI{<JNu
z!1zOgQ3beCiVi`P4ccmD-6yFFs;ZnbbeV`r==X$3EX9LRxFu5u1ct(e067#<E|I;)
z&un26p^lR>!r8nOM4p^gTG;G4J0l^Pk<F_%$eTomc`NHaNnKFY#A8kjBQrNFNew1f
ze8*U*0&TX=OhjlAQ)U=B5$dqCeNI?gs;@ZBbZoFA4IRT_)Pl$7mJMOmkA8PtJ%<9;
zTNOHeH`gyi*#mAJ_+>b(FA0q)g+ngF+nn)`vm75Hba-H at eItebee*xs_S%cMLtZPt
zfwud;VbFV4%^}}&BR8A(b<vlzq(gq_p|J0VZhLXFb;^sa8^3ShzJdD&?i;vo;Dc}A
w)2B!K=P|#1 at ZMkgcI|4~#f<-b=|}zW^Q~*?AD#Ql-GKat8c&zqOTB@A01O0K1ONa4

literal 0
HcmV?d00001

-- 
1.5.6.1