All of lore.kernel.org
 help / color / mirror / Atom feed
From: 刘海坤 <lhk518@163.com>
To: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>
Subject: Re: Xen-devel Digest, Vol 52, Issue 178
Date: Thu, 16 Jul 2009 17:36:28 +0800	[thread overview]
Message-ID: <200907161736267655716@163.com> (raw)
In-Reply-To: 4A38D765.427F33.20102@m12-63.163.com


[-- Attachment #1.1: Type: text/plain, Size: 9874 bytes --]

Hi, all
        I want to reduce the checkpoint size of a VM by memory exclusion. I try to find out all the free pages by reference count at VMM-level, As they declared that:
         /* Page is on a free list: ((count_info & PGC_count_mask) == 0). */ , in struct page_info which is defined in /xen/include/asm-x86/mm.h, but  unfortunately, all the pages in a idle VM accords with this condition. I  prints out  the reference count of all memory pages, all of them are  equal to or bigger than 2. Anyone can tell me the reason? and how can I find out the free pages in a guest OS?


best regards



haikun liu
2009-07-16



发件人： xen-devel-request@lists.xensource.com
发送时间： 2009-06-17 19:45:40
收件人： xen-devel@lists.xensource.com
抄送： 
主题： Xen-devel Digest, Vol 52, Issue 178

Send Xen-devel mailing list submissions to
xen-devel@lists.xensource.com

To subscribe or unsubscribe via the World Wide Web, visit
http://lists.xensource.com/mailman/listinfo/xen-devel
or, via email, send a message with subject or body 'help' to
xen-devel-request@lists.xensource.com

You can reach the person managing the list at
xen-devel-owner@lists.xensource.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Xen-devel digest..."


Today's Topics:

   1. Qemu nic rate limit (=?gb2312?B?yfLG9MH6?=)
   2. [PATCH] xend: pci: find_parent: should return string rather
      than int (Cui, Dexuan)
   3. Re: [PATCH] xend: pci: find_parent: should return string
      rather than int (Simon Horman)
   4. RE: [PATCH] xend: pci: find_parent: should return string
      rather than int (Cui, Dexuan)


----------------------------------------------------------------------

Message: 1
Date: Wed, 17 Jun 2009 17:40:35 +0800
From: =?gb2312?B?yfLG9MH6?=  <shen.qilong@21vianet.com >
Subject: [Xen-devel] Qemu nic rate limit
To:  <xen-devel@lists.xensource.com >
Message-ID:  <002801c9ef2f$aa158c10$0138a8c0@freecloud >
Content-Type: text/plain; charset="gb2312"



I want to limit my NIC rate in DomU. I had found some paper and done some
test. Now I can limit NIC rate in DomU which had installed PV driver, but I
can’t limit NIC rate in DomU which had the NIC emulated by qemu.

Can anyone help me to limit the nic (qemu created) rate in domU.



-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.xensource.com/archives/html/xen-devel/attachments/20090617/6bf62481/attachment.html

------------------------------

Message: 2
Date: Wed, 17 Jun 2009 19:02:27 +0800
From: "Cui, Dexuan"  <dexuan.cui@intel.com >
Subject: [Xen-devel] [PATCH] xend: pci: find_parent: should return
string rather than int
To: Keir Fraser  <keir.fraser@eu.citrix.com >, Simon Horman
<horms@verge.net.au >
Cc: "xen-devel@lists.xensource.com"  <xen-devel@lists.xensource.com >
Message-ID:
<EADF0A36011179459010BDF5142A457501C9E2AFB5@pdsmsx502.ccr.corp.intel.com >
Content-Type: text/plain; charset="gb2312"

Using changeset 19783: 61ec78692b13, device assignment can't work: 
e.g., in find_the_uppermost_pci_bridge(), 
 parent = dev_parent.find_parent()
...
 dev_parent = PciDevice(parent),
we can see parent['domain'] is int and in PciDevice's __init__, int(dev['domain'], 16) would fail:
TypeError: int() can't convert non-string with explicit base

The patch fixes the issue.

Signed-off-by: Dexuan Cui  <dexuan.cui@intel.com >

diff -r 61ec78692b13 tools/python/xen/util/pci.py
--- a/tools/python/xen/util/pci.py  Wed Jun 17 07:39:27 2009 +0100
+++ b/tools/python/xen/util/pci.py  Wed Jun 17 18:35:31 2009 +0800
@@ -547,12 +547,12 @@ class PciDevice:
             else:
                 dev = {}
                 lst = parent.split(':')
-                dev['domain'] = int(lst[0], 16)
-                dev['bus'] = int(lst[1], 16)
+                dev['domain'] = '%04x' % int(lst[0], 16)
+                dev['bus'] = '%02x' % int(lst[1], 16)
                 lst = lst[2]
                 lst = lst.split('.')
-                dev['slot'] = int(lst[0], 16)
-                dev['func'] = int(lst[1], 16)
+                dev['slot'] = '%02x' % int(lst[0], 16)
+                dev['func'] = '%x' % int(lst[1], 16)
             return dev
         except OSError, (errno, strerr):
             raise PciDeviceParseError('Can not locate the parent of %s',

------------------------------

Message: 3
Date: Wed, 17 Jun 2009 21:31:08 +1000
From: Simon Horman  <horms@verge.net.au >
Subject: [Xen-devel] Re: [PATCH] xend: pci: find_parent: should return
string rather than int
To: "Cui, Dexuan"  <dexuan.cui@intel.com >
Cc: "xen-devel@lists.xensource.com"  <xen-devel@lists.xensource.com >,
Keir Fraser  <keir.fraser@eu.citrix.com >
Message-ID:  <20090617113102.GA3504@verge.net.au >
Content-Type: text/plain; charset=us-ascii

On Wed, Jun 17, 2009 at 07:02:27PM +0800, Cui, Dexuan wrote:
> Using changeset 19783: 61ec78692b13, device assignment can't work: 
> e.g., in find_the_uppermost_pci_bridge(), 
>  parent = dev_parent.find_parent()
> ...
>  dev_parent = PciDevice(parent),
> we can see parent['domain'] is int and in PciDevice's __init__, int(dev['domain'], 16) would fail:
> TypeError: int() can't convert non-string with explicit base
> 
> The patch fixes the issue.

Hi Dexuan,

sorry about that. The fix looks good to me.

Could you tell me a bit about what config/command you
ran to produce this problem? I'd like to add something
to the tests that I run.

Acked-by: Simon Horman  <horms@verge.net.au >

> 
> diff -r 61ec78692b13 tools/python/xen/util/pci.py
> --- a/tools/python/xen/util/pci.py  Wed Jun 17 07:39:27 2009 +0100
> +++ b/tools/python/xen/util/pci.py  Wed Jun 17 18:35:31 2009 +0800
> @@ -547,12 +547,12 @@ class PciDevice:
>              else:
>                  dev = {}
>                  lst = parent.split(':')
> -                dev['domain'] = int(lst[0], 16)
> -                dev['bus'] = int(lst[1], 16)
> +                dev['domain'] = '%04x' % int(lst[0], 16)
> +                dev['bus'] = '%02x' % int(lst[1], 16)
>                  lst = lst[2]
>                  lst = lst.split('.')
> -                dev['slot'] = int(lst[0], 16)
> -                dev['func'] = int(lst[1], 16)
> +                dev['slot'] = '%02x' % int(lst[0], 16)
> +                dev['func'] = '%x' % int(lst[1], 16)
>              return dev
>          except OSError, (errno, strerr):
>              raise PciDeviceParseError('Can not locate the parent of %s',



------------------------------

Message: 4
Date: Wed, 17 Jun 2009 19:40:47 +0800
From: "Cui, Dexuan"  <dexuan.cui@intel.com >
Subject: [Xen-devel] RE: [PATCH] xend: pci: find_parent: should return
string rather than int
To: Simon Horman  <horms@verge.net.au >
Cc: "xen-devel@lists.xensource.com"  <xen-devel@lists.xensource.com >,
Keir Fraser  <keir.fraser@eu.citrix.com >
Message-ID:
<EADF0A36011179459010BDF5142A457501C9E2AFB7@pdsmsx502.ccr.corp.intel.com >
Content-Type: text/plain; charset="us-ascii"

Hi Simon,
Attached is my host info of 'lspci'.
I pciback.hide 01:00.0 and 00:1b.0 and when I tried to statically assign 01:00.0 to guest, I got the " TypeError: int() can't convert non-string with explicit base".

Thanks,
-- Dexuan



-----Original Message-----
From: Simon Horman [mailto:horms@verge.net.au] 
Sent: 2009?6?17? 19:31
To: Cui, Dexuan
Cc: Keir Fraser; xen-devel@lists.xensource.com
Subject: Re: [PATCH] xend: pci: find_parent: should return string rather than int

On Wed, Jun 17, 2009 at 07:02:27PM +0800, Cui, Dexuan wrote:
> Using changeset 19783: 61ec78692b13, device assignment can't work: 
> e.g., in find_the_uppermost_pci_bridge(), 
>  parent = dev_parent.find_parent()
> ...
>  dev_parent = PciDevice(parent),
> we can see parent['domain'] is int and in PciDevice's __init__, int(dev['domain'], 16) would fail:
> TypeError: int() can't convert non-string with explicit base
> 
> The patch fixes the issue.

Hi Dexuan,

sorry about that. The fix looks good to me.

Could you tell me a bit about what config/command you
ran to produce this problem? I'd like to add something
to the tests that I run.

Acked-by: Simon Horman  <horms@verge.net.au >

> 
> diff -r 61ec78692b13 tools/python/xen/util/pci.py
> --- a/tools/python/xen/util/pci.py  Wed Jun 17 07:39:27 2009 +0100
> +++ b/tools/python/xen/util/pci.py  Wed Jun 17 18:35:31 2009 +0800
> @@ -547,12 +547,12 @@ class PciDevice:
>              else:
>                  dev = {}
>                  lst = parent.split(':')
> -                dev['domain'] = int(lst[0], 16)
> -                dev['bus'] = int(lst[1], 16)
> +                dev['domain'] = '%04x' % int(lst[0], 16)
> +                dev['bus'] = '%02x' % int(lst[1], 16)
>                  lst = lst[2]
>                  lst = lst.split('.')
> -                dev['slot'] = int(lst[0], 16)
> -                dev['func'] = int(lst[1], 16)
> +                dev['slot'] = '%02x' % int(lst[0], 16)
> +                dev['func'] = '%x' % int(lst[1], 16)
>              return dev
>          except OSError, (errno, strerr):
>              raise PciDeviceParseError('Can not locate the parent of %s',
-------------- next part --------------
A non-text attachment was scrubbed...
Name: lspci.log
Type: application/octet-stream
Size: 38257 bytes
Desc: lspci.log
Url : http://lists.xensource.com/archives/html/xen-devel/attachments/20090617/960358fa/lspci.obj

------------------------------

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel


End of Xen-devel Digest, Vol 52, Issue 178
******************************************

[-- Attachment #1.2: Type: text/html, Size: 24382 bytes --]

[-- Attachment #2: Type: text/plain, Size: 138 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

           reply	other threads:[~2009-07-16  9:36 UTC|newest]

Thread overview: expand[flat|nested]  mbox.gz  Atom feed
 [parent not found: <4A38D765.427F33.20102@m12-63.163.com>]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200907161736267655716@163.com \
    --to=lhk518@163.com \
    --cc=xen-devel@lists.xensource.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.