All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Marek Vasut <marek.vasut@gmail.com>
Cc: alsa-devel@alsa-project.org,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	linux-input@vger.kernel.org
Subject: Re: [PATCH 2/2] Add possibility to control the GPIO_STATUS shift
Date: Fri, 17 Jul 2009 15:52:03 +0100	[thread overview]
Message-ID: <20090717145203.GA15061@rakim.wolfsonmicro.main> (raw)
In-Reply-To: <200907171645.21352.marek.vasut@gmail.com>

On Fri, Jul 17, 2009 at 04:45:21PM +0200, Marek Vasut wrote:

> From 1ea286d088993e05b5b374a08ee6f933242d3561 Mon Sep 17 00:00:00 2001
> From: Marek Vasut <marek.vasut@gmail.com>
> Date: Thu, 4 Jun 2009 21:56:59 +0200
> Subject: [PATCH 2/2] Add possibility to control the GPIO_STATUS shift
> 
> This patch allows tweaking the behaviour of GPIO_STATUS register
> shift quirk that's in wm97xx-core. The problem with GPIO_STATUS
> register being shifted by one doesn't appear on all hardware it
> seems and causes problems with accelerated touchscreen drivers on
> Palm hardware. Therefore an accelerated touchscreen driver can select
> if the shift is/isn't happening on the hardware.

Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

> 
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> ---
>  drivers/input/touchscreen/mainstone-wm97xx.c |    3 +++
>  drivers/input/touchscreen/wm97xx-core.c      |    6 ++++--
>  include/linux/wm97xx.h                       |    7 +++++++
>  3 files changed, 14 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c
> index de02f87..e000ab3 100644
> --- a/drivers/input/touchscreen/mainstone-wm97xx.c
> +++ b/drivers/input/touchscreen/mainstone-wm97xx.c
> @@ -198,6 +198,9 @@ static int wm97xx_acc_startup(struct wm97xx *wm)
>  	if (machine_is_palmt5() || machine_is_palmtx() || machine_is_palmld()) {
>  		pen_int = 1;
>  		irq = 27;
> +		/* There is some obscure mutant of WM9712 interbred with WM9713
> +		 * used on Palm HW */
> +		wm->variant = WM97xx_WM1613;
>  	} else if (machine_is_mainstone() && pen_int)
>  		irq = 4;
>  
> diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
> index 2957d48..252eb11 100644
> --- a/drivers/input/touchscreen/wm97xx-core.c
> +++ b/drivers/input/touchscreen/wm97xx-core.c
> @@ -204,7 +204,7 @@ void wm97xx_set_gpio(struct wm97xx *wm, u32 gpio,
>  	else
>  		reg &= ~gpio;
>  
> -	if (wm->id == WM9712_ID2)
> +	if (wm->id == WM9712_ID2 && wm->variant != WM97xx_WM1613)
>  		wm97xx_reg_write(wm, AC97_GPIO_STATUS, reg << 1);
>  	else
>  		wm97xx_reg_write(wm, AC97_GPIO_STATUS, reg);
> @@ -307,7 +307,7 @@ static void wm97xx_pen_irq_worker(struct work_struct *work)
>  					 WM97XX_GPIO_13);
>  		}
>  
> -		if (wm->id == WM9712_ID2)
> +		if (wm->id == WM9712_ID2 && wm->variant != WM97xx_WM1613)
>  			wm97xx_reg_write(wm, AC97_GPIO_STATUS, (status &
>  						~WM97XX_GPIO_13) << 1);
>  		else
> @@ -582,6 +582,8 @@ static int wm97xx_probe(struct device *dev)
>  
>  	wm->id = wm97xx_reg_read(wm, AC97_VENDOR_ID2);
>  
> +	wm->variant = WM97xx_GENERIC;
> +
>  	dev_info(wm->dev, "detected a wm97%02x codec\n", wm->id & 0xff);
>  
>  	switch (wm->id & 0xff) {
> diff --git a/include/linux/wm97xx.h b/include/linux/wm97xx.h
> index 6f69968..0c98781 100644
> --- a/include/linux/wm97xx.h
> +++ b/include/linux/wm97xx.h
> @@ -16,6 +16,12 @@
>  #include <linux/platform_device.h>
>  
>  /*
> + * WM97xx variants
> + */
> +#define	WM97xx_GENERIC			0x0000
> +#define	WM97xx_WM1613			0x1613
> +
> +/*
>   * WM97xx AC97 Touchscreen registers
>   */
>  #define AC97_WM97XX_DIGITISER1		0x76
> @@ -283,6 +289,7 @@ struct wm97xx {
>  	unsigned pen_is_down:1;		/* Pen is down */
>  	unsigned aux_waiting:1;		/* aux measurement waiting */
>  	unsigned pen_probably_down:1;	/* used in polling mode */
> +	u16 variant;			/* WM97xx chip variant */
>  	u16 suspend_mode;               /* PRP in suspend mode */
>  };
>  
> -- 
> 1.6.3.3
> 

  reply	other threads:[~2009-07-17 14:52 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <200907171001.16889.marek.vasut@gmail.com>
2009-07-17 10:32 ` [PATCH 2/2] Add possibility to control the GPIO_STATUS shift Mark Brown
2009-07-17 11:12   ` Marek Vasut
2009-07-17 11:22     ` Mark Brown
2009-07-17 11:26       ` Marek Vasut
2009-07-17 11:43         ` Mark Brown
2009-07-17 11:53           ` Marek Vasut
2009-07-17 12:11             ` Mark Brown
2009-07-17 14:45               ` Marek Vasut
2009-07-17 14:52                 ` Mark Brown [this message]
2009-07-21  5:45                   ` Dmitry Torokhov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090717145203.GA15061@rakim.wolfsonmicro.main \
    --to=broonie@opensource.wolfsonmicro.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=linux-input@vger.kernel.org \
    --cc=marek.vasut@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.