From: Andrew Lunn <andrew.lunn@ascom.ch>
To: "B.A.T.M.A.N" <b.a.t.m.a.n@lists.open-mesh.net>
Subject: [B.A.T.M.A.N.] [batman-adv] Cleanup soft_interface.[ch]
Date: Sat, 18 Jul 2009 16:57:32 +0200 [thread overview]
Message-ID: <20090718145732.GP4656@ma.tech.ascom.ch> (raw)
Make soft-interface.[ch] clean with respect to the 2.6.29 checkpatch
script. Exceptions are long lines with debug_log and using
KERNEL_VERSION.
Signed-off-by: Andrew Lunn <andrew.lunn@ascom.ch>
Index: batman-adv-kernelland/soft-interface.c
===================================================================
--- batman-adv-kernelland/soft-interface.c (revision 1351)
+++ batman-adv-kernelland/soft-interface.c (working copy)
@@ -17,10 +17,6 @@
*
*/
-
-
-
-
#include "main.h"
#include "soft-interface.h"
#include "hard-interface.h"
@@ -33,30 +29,23 @@
#include <linux/etherdevice.h>
#include "compat.h"
+static uint16_t bcast_seqno = 1; /* give own bcast messages seq numbers to avoid
+ * broadcast storms */
+static int32_t skb_packets;
+static int32_t skb_bad_packets;
+static int32_t lock_dropped;
-
-
-
-static uint16_t bcast_seqno = 1; /* give own bcast messages seq numbers to avoid broadcast storms */
-static int32_t skb_packets = 0;
-static int32_t skb_bad_packets = 0;
-static int32_t lock_dropped = 0;
-
-unsigned char mainIfAddr[] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
-static unsigned char mainIfAddr_default[] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
-
-
-
-
+unsigned char mainIfAddr[ETH_ALEN];
+static unsigned char mainIfAddr_default[ETH_ALEN];
static int bat_get_settings(struct net_device *dev, struct ethtool_cmd *cmd);
-static void bat_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info);
+static void bat_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info);
static u32 bat_get_msglevel(struct net_device *dev);
static void bat_set_msglevel(struct net_device *dev, u32 value);
static u32 bat_get_link(struct net_device *dev);
static u32 bat_get_rx_csum(struct net_device *dev);
static int bat_set_rx_csum(struct net_device *dev, u32 data);
-
static const struct ethtool_ops bat_ethtool_ops = {
.get_settings = bat_get_settings,
.get_drvinfo = bat_get_drvinfo,
@@ -67,7 +56,6 @@
.set_rx_csum = bat_set_rx_csum
};
-
void set_main_if_addr(uint8_t *addr)
{
memcpy(mainIfAddr, addr, ETH_ALEN);
@@ -90,11 +78,7 @@
if (result < 0)
return result;
}
- /* TODO: remove this later. it's just for verification. */
- if ((skb_packets & 0xFF) == 0) /* report every 256 packets */
- debug_log(LOG_TYPE_NOTICE, "(%d/%d skbs had to be re-expanded)\n", skb_bad_packets, skb_packets);
-
skb_push(skb, len);
return 0;
}
@@ -132,7 +116,8 @@
dev->features |= NETIF_F_NO_CSUM;
dev->mtu = hardif_min_mtu();
- dev->hard_header_len = BAT_HEADER_LEN; /* reserve more space in the skbuff for our header */
+ dev->hard_header_len = BAT_HEADER_LEN; /* reserve more space in the
+ * skbuff for our header */
/* generate random address */
*(u16 *)dev_addr = __constant_htons(0x00FF);
@@ -207,7 +192,8 @@
/* batman packet type: broadcast */
bcast_packet->packet_type = BAT_BCAST;
- /* hw address of first interface is the orig mac because only this mac is known throughout the mesh */
+ /* hw address of first interface is the orig mac because only
+ * this mac is known throughout the mesh */
memcpy(bcast_packet->orig, mainIfAddr, ETH_ALEN);
/* set broadcast sequence number */
bcast_packet->seqno = htons(bcast_seqno);
@@ -220,8 +206,10 @@
/* unicast packet */
} else {
- /* simply spin_lock()ing can deadlock when the lock is already hold. */
- /* TODO: defer the work in a working queue instead of dropping */
+ /* simply spin_lock()ing can deadlock when the lock is already
+ * hold. */
+ /* TODO: defer the work in a working queue instead of
+ * dropping */
if (!spin_trylock(&orig_hash_lock)) {
lock_dropped++;
debug_log(LOG_TYPE_NOTICE, "%d packets dropped because lock was hold\n", lock_dropped);
@@ -229,14 +217,16 @@
}
/* get routing information */
- orig_node = ((struct orig_node *)hash_find(orig_hash, ethhdr->h_dest));
+ orig_node = ((struct orig_node *)hash_find(orig_hash,
+ ethhdr->h_dest));
/* check for hna host */
if (orig_node == NULL)
orig_node = transtable_search(ethhdr->h_dest);
- if ((orig_node != NULL) && (orig_node->batman_if != NULL) && (orig_node->router != NULL)) {
-
+ if ((orig_node != NULL) &&
+ (orig_node->batman_if != NULL) &&
+ (orig_node->router != NULL)) {
if (my_skb_push(skb, sizeof(struct unicast_packet)) < 0)
goto unlock;
@@ -254,12 +244,12 @@
if (orig_node->batman_if->if_active != IF_ACTIVE)
goto unlock;
- send_raw_packet(skb->data, skb->len, orig_node->batman_if->net_dev->dev_addr, orig_node->router->addr, orig_node->batman_if);
-
+ send_raw_packet(skb->data, skb->len,
+ orig_node->batman_if->net_dev->dev_addr,
+ orig_node->router->addr,
+ orig_node->batman_if);
} else {
-
goto unlock;
-
}
spin_unlock(&orig_hash_lock);
@@ -271,10 +261,8 @@
unlock:
spin_unlock(&orig_hash_lock);
-
dropped:
priv->stats.tx_dropped++;
-
end:
kfree_skb(skb);
return 0;
@@ -327,7 +315,8 @@
return 0;
}
-static void bat_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+static void bat_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
{
strcpy(info->driver, "B.A.T.M.A.N. advanced");
strcpy(info->version, SOURCE_VERSION);
@@ -359,4 +348,3 @@
{
return -EOPNOTSUPP;
}
-
Index: batman-adv-kernelland/soft-interface.h
===================================================================
--- batman-adv-kernelland/soft-interface.h (revision 1351)
+++ batman-adv-kernelland/soft-interface.h (working copy)
@@ -17,10 +17,6 @@
*
*/
-
-
-
-
void set_main_if_addr(uint8_t *addr);
int main_if_was_up(void);
void interface_setup(struct net_device *dev);
reply other threads:[~2009-07-18 14:57 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090718145732.GP4656@ma.tech.ascom.ch \
--to=andrew.lunn@ascom.ch \
--cc=b.a.t.m.a.n@lists.open-mesh.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.