[ath9k-devel] r52n - ar9220 miniPCi 11n

[Luis R. Rodriguez <lrodriguez@atheros.com>]

On Mon, Jul 20, 2009 at 12:14:37PM -0700, Sinan Akman wrote:
> Luis R. Rodriguez wrote:
> > On Sat, Jul 18, 2009 at 05:07:49PM -0700, Sinan Akman wrote:
> >> Luis R. Rodriguez wrote:
> >>> Curious if anyone has tested ath9k with this card or any ar9220s. It
> >>> should have our ar9280 MAC.
> >>>
> >>> http://www.mikrotik-shop.de/product_info.php?info=p513_MikroTik-RouterBoard-R52N.html
> >>    FWIW, I tested R2N briefly which has ar9223 instead and it works in AP with simple PSK
> >> config.
> >
> > Nice, added to the wiki external products page, thanks, do you have the output of loading
> > a recent ath9k driver with that?
> 
>    from dmesg :
> 
>    phy0: Selected rate control algorithm 'ath9k_rate_control'
>    Registered led device: ath9k-phy0::radio
>    Registered led device: ath9k-phy0::assoc
>    Registered led device: ath9k-phy0::tx
>    Registered led device: ath9k-phy0::rx
>    phy0: Atheros AR9280 MAC/BB Rev:2 AR5133 RF Rev:d0: mem=0xc50e0000, irq=18

Thanks, I was looking for the AR5133, the radio.

> 
>    also :
> 
>    # lspci
>    [..]
>    00:11.0 Network controller: Atheros Communications Inc. AR922X Wireless Network
>    Adapter (rev 01)
> 
>    # uname -a
>    Linux uclibc 2.6.30 #1 Thu Jul 2 18:23:32 EDT 2009 ppc unknown
> 
>    This is with hostapd v0.6.9.
> 
>    I also see enter/exit power save mode continuously :
> 
>    Jul 20 02:53:09 uclibc user.debug kernel: wlan0: STA 00:0f:66:70:87:37 aid 1
>    exits power save mode
>    Jul 20 02:54:12 uclibc user.debug kernel: wlan0: STA 00:0f:66:70:87:37 aid 1
>    enters power save mode
>    Jul 20 02:54:14 uclibc user.debug kernel: wlan0: STA 00:0f:66:70:87:37 aid 1
>    exits power save mode
>    ....

Who is 00:0f:66:70:87:37?

  Luis

> >
> >>    I'll also test R52N when I receive it and have time in the coming weeks.
> >> Let me know if you are interested in a particular config.
> >
> > That would be great, thanks.
> 
>    I'll update you on R52N hopefully later in the week. Let me know
> if you need any other log output.
> 
>    -- sinan