From: wysochanski@sourceware.org <wysochanski@sourceware.org>
To: lvm-devel@redhat.com
Subject: LVM2/test/api vgtest.c
Date: 27 Jul 2009 17:44:58 -0000 [thread overview]
Message-ID: <20090727174458.22424.qmail@sourceware.org> (raw)
CVSROOT: /cvs/lvm2
Module name: LVM2
Changes by: wysochanski at sourceware.org 2009-07-27 17:44:58
Modified files:
test/api : vgtest.c
Log message:
Update test/api/vgtest.c to include lvm_vg_reduce.
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Acked-by: Dave Wysochanski <dwysocha@redhat.com>
Author: Dave Wysochanski <dwysocha@redhat.com>
Patches:
http://sourceware.org/cgi-bin/cvsweb.cgi/LVM2/test/api/vgtest.c.diff?cvsroot=lvm2&r1=1.5&r2=1.6
--- LVM2/test/api/vgtest.c 2009/07/26 20:29:56 1.5
+++ LVM2/test/api/vgtest.c 2009/07/27 17:44:58 1.6
@@ -26,8 +26,63 @@
vg_t *vg;
const char *vg_name = "my_vg";
const char *device = "/dev/loop3";
+const char *device2 = "/dev/loop4";
uint64_t size = 1024;
+#define vg_create(vg_name) \
+ printf("Creating VG %s\n", vg_name); \
+ vg = lvm_vg_create(handle, vg_name); \
+ if (!vg) { \
+ fprintf(stderr, "Error creating volume group %s\n", vg_name); \
+ goto bad; \
+ }
+#define vg_extend(vg, dev) \
+ printf("Extending VG %s by %s\n", vg_name, dev); \
+ status = lvm_vg_extend(vg, dev); \
+ if (status) { \
+ fprintf(stderr, "Error extending volume group %s " \
+ "with device %s\n", vg_name, dev); \
+ goto bad; \
+ }
+#define vg_commit(vg) \
+ printf("Committing VG %s to disk\n", vg_name); \
+ status = lvm_vg_write(vg); \
+ if (status) { \
+ fprintf(stderr, "Creation of volume group '%s' on " \
+ "device '%s' failed\n", \
+ lvm_vg_get_name(vg), device); \
+ goto bad; \
+ }
+#define vg_open(vg_name, mode) \
+ printf("Opening VG %s %s\n", vg_name, mode); \
+ vg = lvm_vg_open(handle, vg_name, mode, 0); \
+ if (!vg) { \
+ fprintf(stderr, "Error opening volume group %s\n", vg_name); \
+ goto bad; \
+ }
+#define vg_close(vg) \
+ printf("Closing VG %s\n", vg_name); \
+ if (lvm_vg_close(vg)) { \
+ fprintf(stderr, "Error closing volume group %s\n", vg_name); \
+ goto bad; \
+ }
+#define vg_reduce(vg, dev) \
+ printf("Reducing VG %s by %s\n", vg_name, dev); \
+ status = lvm_vg_reduce(vg, dev); \
+ if (status) { \
+ fprintf(stderr, "Error reducing volume group %s " \
+ "by device %s\n", vg_name, dev); \
+ goto bad; \
+ }
+#define vg_remove(vg) \
+ printf("Removing VG %s from system\n", vg_name); \
+ status = lvm_vg_remove(vg); \
+ if (status) { \
+ fprintf(stderr, "Revmoval of volume group '%s' failed\n", \
+ vg_name); \
+ goto bad; \
+ }
+
int main(int argc, char *argv[])
{
int status;
@@ -41,20 +96,8 @@
goto bad;
}
- printf("Creating VG %s\n", vg_name);
- vg = lvm_vg_create(handle, vg_name);
- if (!vg) {
- fprintf(stderr, "Error creating volume group %s\n", vg_name);
- goto bad;
- }
-
- printf("Extending VG %s\n", vg_name);
- status = lvm_vg_extend(vg, device);
- if (status) {
- fprintf(stderr, "Error extending volume group %s "
- "with device %s\n", vg_name, device);
- goto bad;
- }
+ vg_create(vg_name);
+ vg_extend(vg, device);
printf("Setting VG %s extent_size to %"PRIu64"\n", vg_name, size);
status = lvm_vg_set_extent_size(vg, size);
@@ -65,38 +108,27 @@
goto bad;
}
- printf("Committing VG %s to disk\n", vg_name);
- status = lvm_vg_write(vg);
- if (status) {
- fprintf(stderr, "Creation of volume group '%s' on "
- "device '%s' failed\n",
- vg_name, device);
- goto bad;
- }
+ vg_commit(vg);
+ vg_close(vg);
- printf("Closing VG %s\n", vg_name);
- if (lvm_vg_close(vg))
- goto bad;
- printf("Re-opening VG %s for reading\n", vg_name);
- vg = lvm_vg_open(handle, vg_name, "r", 0);
- if (!vg)
- goto bad;
- printf("Closing VG %s\n", vg_name);
- if (lvm_vg_close(vg))
- goto bad;
- printf("Re-opening VG %s for writing\n", vg_name);
- vg = lvm_vg_open(handle, vg_name, "w", 0);
- if (!vg)
- goto bad;
- printf("Removing VG %s from system\n", vg_name);
- status = lvm_vg_remove(vg);
- if (status) {
- fprintf(stderr, "Revmoval of volume group '%s' failed\n",
- vg_name);
- goto bad;
- }
+ vg_open(vg_name, "r");
+ vg_close(vg);
+
+ vg_open(vg_name, "w");
+ vg_extend(vg, device2);
+ vg_reduce(vg, device);
+ vg_commit(vg);
+ vg_close(vg);
+
+ vg_open(vg_name, "w");
+ vg_extend(vg, device);
+ vg_commit(vg);
+ vg_close(vg);
+
+ vg_open(vg_name, "w");
+ vg_remove(vg);
+ vg_close(vg);
- lvm_vg_close(vg);
lvm_destroy(handle);
printf("liblvm vgcreate unit test PASS\n");
_exit(0);
next reply other threads:[~2009-07-27 17:44 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-27 17:44 wysochanski [this message]
-- strict thread matches above, loose matches on Subject: below --
2009-09-04 19:17 LVM2/test/api vgtest.c wysochanski
2009-09-03 17:13 wysochanski
2009-07-22 22:25 wysochanski
2009-07-22 16:49 wysochanski
2009-07-22 3:13 wysochanski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090727174458.22424.qmail@sourceware.org \
--to=wysochanski@sourceware.org \
--cc=lvm-devel@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.