From: Wu Fengguang <fengguang.wu@intel.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org
Subject: [PATCH] hda: add 2-channel mode to Intel ALC889/ALC889A models
Date: Thu, 30 Jul 2009 14:36:35 +0800 [thread overview]
Message-ID: <20090730063635.GA5525@localhost> (raw)
This 2-channel mode is useful in that it will broadcast
a 2-channel audio stream to all front/side/... ports.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
---
sound/pci/hda/patch_realtek.c | 44 ++++++++++++++++++--------------
1 file changed, 25 insertions(+), 19 deletions(-)
--- sound-2.6.orig/sound/pci/hda/patch_realtek.c
+++ sound-2.6/sound/pci/hda/patch_realtek.c
@@ -6682,18 +6682,27 @@ static struct hda_channel_mode alc883_3S
};
/*
+ * 2ch mode
+ */
+static struct hda_verb alc889_ch2_intel_init[] = {
+ { 0x14, AC_VERB_SET_CONNECT_SEL, 0x00 },
+ { 0x19, AC_VERB_SET_CONNECT_SEL, 0x00 },
+ { 0x16, AC_VERB_SET_CONNECT_SEL, 0x00 },
+ { 0x17, AC_VERB_SET_CONNECT_SEL, 0x00 },
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+ { } /* end */
+};
+
+/*
* 6ch mode
*/
static struct hda_verb alc889_ch6_intel_init[] = {
- { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
+ { 0x14, AC_VERB_SET_CONNECT_SEL, 0x00 },
+ { 0x19, AC_VERB_SET_CONNECT_SEL, 0x01 },
+ { 0x16, AC_VERB_SET_CONNECT_SEL, 0x02 },
+ { 0x17, AC_VERB_SET_CONNECT_SEL, 0x03 },
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
{ 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
{ } /* end */
};
@@ -6702,21 +6711,18 @@ static struct hda_verb alc889_ch6_intel_
* 8ch mode
*/
static struct hda_verb alc889_ch8_intel_init[] = {
- { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x14, AC_VERB_SET_CONNECT_SEL, 0x00 },
+ { 0x19, AC_VERB_SET_CONNECT_SEL, 0x01 },
+ { 0x16, AC_VERB_SET_CONNECT_SEL, 0x02 },
+ { 0x17, AC_VERB_SET_CONNECT_SEL, 0x03 },
+ { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x03 },
{ 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
{ 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x03 },
{ } /* end */
};
-static struct hda_channel_mode alc889_8ch_intel_modes[2] = {
+static struct hda_channel_mode alc889_8ch_intel_modes[3] = {
+ { 2, alc889_ch2_intel_init },
{ 6, alc889_ch6_intel_init },
{ 8, alc889_ch8_intel_init },
};
next reply other threads:[~2009-07-30 6:36 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-30 6:36 Wu Fengguang [this message]
2009-07-30 6:54 ` [PATCH] hda: add 2-channel mode to Intel ALC889/ALC889A models Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090730063635.GA5525@localhost \
--to=fengguang.wu@intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.