From: Florian Fainelli <florian@openwrt.org>
To: Ralf Baechle <ralf@linux-mips.org>
Cc: Maxime Bizon <mbizon@freebox.fr>, linux-mips@linux-mips.org
Subject: [PATCH 4/8] bcm63xx: add support for the BCM6338 SoC
Date: Fri, 7 Aug 2009 23:46:44 +0200 [thread overview]
Message-ID: <200908072346.45245.florian@openwrt.org> (raw)
This patch adds support for the BCM6338 SoC, it is very similar
to BCM6348 except that:
- the CPU frequency is not locked on PLL and is fixed
- there is only one Ethernet MAC therefore the DMA zone is twice smaller
Signed-off-by: Florian Fainelli <florian@openwrt.org>
---
diff --git a/arch/mips/bcm63xx/Kconfig b/arch/mips/bcm63xx/Kconfig
index 8c192e7..325f69a 100644
--- a/arch/mips/bcm63xx/Kconfig
+++ b/arch/mips/bcm63xx/Kconfig
@@ -1,6 +1,13 @@
menu "CPU support"
depends on BCM63XX
+config BCM63XX_CPU_6338
+ bool "support 6338 CPU"
+ select HW_HAS_PCI
+ select USB_ARCH_HAS_OHCI
+ select USB_OHCI_BIG_ENDIAN_DESC
+ select USB_OHCI_BIG_ENDIAN_MMIO
+
config BCM63XX_CPU_6348
bool "support 6348 CPU"
select HW_HAS_PCI
diff --git a/arch/mips/bcm63xx/clk.c b/arch/mips/bcm63xx/clk.c
index ae1f41f..d189965 100644
--- a/arch/mips/bcm63xx/clk.c
+++ b/arch/mips/bcm63xx/clk.c
@@ -49,7 +49,9 @@ static void enet_misc_set(struct clk *clk, int enable)
{
u32 mask;
- if (BCMCPU_IS_6348())
+ if (BCMCPU_IS_6338())
+ mask = CKCTL_6338_ENET_EN;
+ else if (BCMCPU_IS_6348())
mask = CKCTL_6348_ENET_EN;
else
/* BCMCPU_IS_6358 */
@@ -143,7 +145,9 @@ static void spi_set(struct clk *clk, int enable)
{
u32 mask;
- if (BCMCPU_IS_6348())
+ if (BCMCPU_IS_6338())
+ mask = CKCTL_6338_SPI_EN;
+ else if (BCMCPU_IS_6348())
mask = CKCTL_6348_SPI_EN;
else
/* BCMCPU_IS_6358 */
diff --git a/arch/mips/bcm63xx/cpu.c b/arch/mips/bcm63xx/cpu.c
index 9d6cfce..cb41855 100644
--- a/arch/mips/bcm63xx/cpu.c
+++ b/arch/mips/bcm63xx/cpu.c
@@ -4,6 +4,7 @@
* for more details.
*
* Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org>
*/
#include <linux/kernel.h>
@@ -26,6 +27,42 @@ static unsigned int bcm63xx_cpu_freq;
static unsigned int bcm63xx_memory_size;
/*
+ * 6338 register sets and irqs
+ */
+static const unsigned long bcm96338_regs_base[] = {
+ [RSET_DSL_LMEM] = BCM_6338_DSL_LMEM_BASE,
+ [RSET_PERF] = BCM_6338_PERF_BASE,
+ [RSET_TIMER] = BCM_6338_TIMER_BASE,
+ [RSET_WDT] = BCM_6338_WDT_BASE,
+ [RSET_UART0] = BCM_6338_UART0_BASE,
+ [RSET_GPIO] = BCM_6338_GPIO_BASE,
+ [RSET_SPI] = BCM_6338_SPI_BASE,
+ [RSET_OHCI0] = BCM_6338_OHCI0_BASE,
+ [RSET_OHCI_PRIV] = BCM_6338_OHCI_PRIV_BASE,
+ [RSET_USBH_PRIV] = BCM_6338_USBH_PRIV_BASE,
+ [RSET_UDC0] = BCM_6338_UDC0_BASE,
+ [RSET_MPI] = BCM_6338_MPI_BASE,
+ [RSET_PCMCIA] = BCM_6338_PCMCIA_BASE,
+ [RSET_SDRAM] = BCM_6338_SDRAM_BASE,
+ [RSET_DSL] = BCM_6338_DSL_BASE,
+ [RSET_ENET0] = BCM_6338_ENET0_BASE,
+ [RSET_ENET1] = BCM_6338_ENET1_BASE,
+ [RSET_ENETDMA] = BCM_6338_ENETDMA_BASE,
+ [RSET_MEMC] = BCM_6338_MEMC_BASE,
+ [RSET_DDR] = BCM_6338_DDR_BASE,
+};
+
+static const int bcm96338_irqs[] = {
+ [IRQ_TIMER] = BCM_6338_TIMER_IRQ,
+ [IRQ_UART0] = BCM_6338_UART0_IRQ,
+ [IRQ_DSL] = BCM_6338_DSL_IRQ,
+ [IRQ_ENET0] = BCM_6338_ENET0_IRQ,
+ [IRQ_ENET_PHY] = BCM_6338_ENET_PHY_IRQ,
+ [IRQ_ENET0_RXDMA] = BCM_6338_ENET0_RXDMA_IRQ,
+ [IRQ_ENET0_TXDMA] = BCM_6338_ENET0_TXDMA_IRQ,
+};
+
+/*
* 6348 register sets and irqs
*/
static const unsigned long bcm96348_regs_base[] = {
@@ -137,6 +174,10 @@ static unsigned int detect_cpu_clock(void)
{
unsigned int tmp, n1 = 0, n2 = 0, m1 = 0;
+ /* BCM6338 has a fixed 240 Mhz frequency */
+ if (BCMCPU_IS_6338())
+ return 240000000;
+
/*
* frequency depends on PLL configuration:
*/
@@ -170,7 +211,7 @@ static unsigned int detect_memory_size(void)
unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
u32 val;
- if (BCMCPU_IS_6348()) {
+ if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) {
val = bcm_sdram_readl(SDRAM_CFG_REG);
rows = (val & SDRAM_CFG_ROW_MASK) >> SDRAM_CFG_ROW_SHIFT;
cols = (val & SDRAM_CFG_COL_MASK) >> SDRAM_CFG_COL_SHIFT;
@@ -204,6 +245,13 @@ void __init bcm63xx_cpu_init(void)
expected_cpu_id = 0;
switch (c->cputype) {
+ /* BCM6338 as the same PrId as BCM3302 see
+ * arch/mips/kernel/cpu-probe.c */
+ case CPU_BCM3302:
+ expected_cpu_id = BCM6338_CPU_ID;
+ bcm63xx_regs_base = bcm96338_regs_base;
+ bcm63xx_irqs = bcm96338_irqs;
+ break;
case CPU_BCM6348:
expected_cpu_id = BCM6348_CPU_ID;
bcm63xx_regs_base = bcm96348_regs_base;
diff --git a/arch/mips/bcm63xx/dev-enet.c b/arch/mips/bcm63xx/dev-enet.c
index 188fa66..9f544ba 100644
--- a/arch/mips/bcm63xx/dev-enet.c
+++ b/arch/mips/bcm63xx/dev-enet.c
@@ -107,7 +107,10 @@ int __init bcm63xx_enet_register(int unit,
if (!shared_device_registered) {
shared_res[0].start = bcm63xx_regset_address(RSET_ENETDMA);
shared_res[0].end = shared_res[0].start;
- shared_res[0].end += RSET_ENETDMA_SIZE - 1;
+ if (BCMCPU_IS_6338())
+ shared_res[0].end += (RSET_ENETDMA_SIZE / 2) - 1;
+ else
+ shared_res[0].end += (RSET_ENETDMA_SIZE) - 1;
ret = platform_device_register(&bcm63xx_enet_shared_device);
if (ret)
diff --git a/arch/mips/bcm63xx/prom.c b/arch/mips/bcm63xx/prom.c
index d97ceed..6a41acb 100644
--- a/arch/mips/bcm63xx/prom.c
+++ b/arch/mips/bcm63xx/prom.c
@@ -25,7 +25,9 @@ void __init prom_init(void)
bcm_wdt_writel(WDT_STOP_2, WDT_CTL_REG);
/* disable all hardware blocks clock for now */
- if (BCMCPU_IS_6348())
+ if (BCMCPU_IS_6338())
+ mask = CKCTL_6338_ALL_SAFE_EN;
+ else if (BCMCPU_IS_6348())
mask = CKCTL_6348_ALL_SAFE_EN;
else
/* BCMCPU_IS_6358() */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
index 29b61fd..3c107d0 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
@@ -9,6 +9,7 @@
* compile time if only one CPU support is enabled (idea stolen from
* arm mach-types)
*/
+#define BCM6338_CPU_ID 0x6338
#define BCM6348_CPU_ID 0x6348
#define BCM6358_CPU_ID 0x6358
@@ -17,6 +18,19 @@ u16 __bcm63xx_get_cpu_id(void);
u16 bcm63xx_get_cpu_rev(void);
unsigned int bcm63xx_get_cpu_freq(void);
+#ifdef CONFIG_BCM63XX_CPU_6338
+# ifdef bcm63xx_get_cpu_id
+# undef bcm63xx_get_cpu_id
+# define bcm63xx_get_cpu_id() __bcm63xx_get_cpu_id()
+# define BCMCPU_RUNTIME_DETECT
+# else
+# define bcm63xx_get_cpu_id() BCM6338_CPU_ID
+# endif
+# define BCMCPU_IS_6338() (bcm63xx_get_cpu_id() == BCM6338_CPU_ID)
+#else
+# define BCMCPU_IS_6338() (0)
+#endif
+
#ifdef CONFIG_BCM63XX_CPU_6348
# ifdef bcm63xx_get_cpu_id
# undef bcm63xx_get_cpu_id
@@ -87,6 +101,36 @@ enum bcm63xx_regs_set {
#define RSET_PCMCIA_SIZE 12
/*
+ * 6338 register sets base address
+ */
+#define BCM_6338_DSL_LMEM_BASE (0xfff00000)
+#define BCM_6338_PERF_BASE (0xfffe0000)
+#define BCM_6338_BB_BASE (0xfffe0100)
+#define BCM_6338_TIMER_BASE (0xfffe0200)
+#define BCM_6338_WDT_BASE (0xfffe021c)
+#define BCM_6338_UART0_BASE (0xfffe0300)
+#define BCM_6338_GPIO_BASE (0xfffe0400)
+#define BCM_6338_SPI_BASE (0xfffe0c00)
+#define BCM_6338_UDC0_BASE (0xdeadbeef)
+#define BCM_6338_USBDMA_BASE (0xfffe2400)
+#define BCM_6338_OHCI0_BASE (0xdeadbeef)
+#define BCM_6338_OHCI_PRIV_BASE (0xfffe3000)
+#define BCM_6338_USBH_PRIV_BASE (0xdeadbeef)
+#define BCM_6338_MPI_BASE (0xfffe3160)
+#define BCM_6338_PCMCIA_BASE (0xdeadbeef)
+#define BCM_6338_SDRAM_REGS_BASE (0xfffe3100)
+#define BCM_6338_DSL_BASE (0xfffe1000)
+#define BCM_6338_SAR_BASE (0xfffe2000)
+#define BCM_6338_UBUS_BASE (0xdeadbeef)
+#define BCM_6338_ENET0_BASE (0xfffe2800)
+#define BCM_6338_ENET1_BASE (0xdeadbeef)
+#define BCM_6338_ENETDMA_BASE (0xfffe2400)
+#define BCM_6338_EHCI0_BASE (0xdeadbeef)
+#define BCM_6338_SDRAM_BASE (0xfffe3100)
+#define BCM_6338_MEMC_BASE (0xdeadbeef)
+#define BCM_6338_DDR_BASE (0xdeadbeef)
+
+/*
* 6348 register sets base address
*/
#define BCM_6348_DSL_LMEM_BASE (0xfff00000)
@@ -146,6 +190,52 @@ static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set)
#ifdef BCMCPU_RUNTIME_DETECT
return bcm63xx_regs_base[set];
#else
+#ifdef CONFIG_BCM63XX_CPU_6338
+ switch (set) {
+ case RSET_DSL_LMEM:
+ return BCM_6338_DSL_LMEM_BASE;
+ case RSET_PERF:
+ return BCM_6338_PERF_BASE;
+ case RSET_TIMER:
+ return BCM_6338_TIMER_BASE;
+ case RSET_WDT:
+ return BCM_6338_WDT_BASE;
+ case RSET_UART0:
+ return BCM_6338_UART0_BASE;
+ case RSET_GPIO:
+ return BCM_6338_GPIO_BASE;
+ case RSET_SPI:
+ return BCM_6338_SPI_BASE;
+ case RSET_UDC0:
+ return BCM_6338_UDC0_BASE;
+ case RSET_OHCI0:
+ return BCM_6338_OHCI0_BASE;
+ case RSET_OHCI_PRIV:
+ return BCM_6338_OHCI_PRIV_BASE;
+ case RSET_USBH_PRIV:
+ return BCM_6338_USBH_PRIV_BASE;
+ case RSET_MPI:
+ return BCM_6338_MPI_BASE;
+ case RSET_PCMCIA:
+ return BCM_6338_PCMCIA_BASE;
+ case RSET_DSL:
+ return BCM_6338_DSL_BASE;
+ case RSET_ENET0:
+ return BCM_6338_ENET0_BASE;
+ case RSET_ENET1:
+ return BCM_6338_ENET1_BASE;
+ case RSET_ENETDMA:
+ return BCM_6338_ENETDMA_BASE;
+ case RSET_EHCI0:
+ return BCM_6338_EHCI0_BASE;
+ case RSET_SDRAM:
+ return BCM_6338_SDRAM_BASE;
+ case RSET_MEMC:
+ return BCM_6338_MEMC_BASE;
+ case RSET_DDR:
+ return BCM_6338_DDR_BASE;
+ }
+#endif
#ifdef CONFIG_BCM63XX_CPU_6348
switch (set) {
case RSET_DSL_LMEM:
@@ -265,6 +355,27 @@ enum bcm63xx_irq {
};
/*
+ * 6338 irqs
+ */
+#define BCM_6338_TIMER_IRQ (IRQ_INTERNAL_BASE + 0)
+#define BCM_6338_SPI_IRQ (IRQ_INTERNAL_BASE + 1)
+#define BCM_6338_UART0_IRQ (IRQ_INTERNAL_BASE + 2)
+#define BCM_6338_DG_IRQ (IRQ_INTERNAL_BASE + 4)
+#define BCM_6338_DSL_IRQ (IRQ_INTERNAL_BASE + 5)
+#define BCM_6338_ATM_IRQ (IRQ_INTERNAL_BASE + 6)
+#define BCM_6338_UDC0_IRQ (IRQ_INTERNAL_BASE + 7)
+#define BCM_6338_ENET0_IRQ (IRQ_INTERNAL_BASE + 8)
+#define BCM_6338_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9)
+#define BCM_6338_SDRAM_IRQ (IRQ_INTERNAL_BASE + 10)
+#define BCM_6338_USB_CNTL_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 11)
+#define BCM_6338_USB_CNTL_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 12)
+#define BCM_6338_USB_BULK_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 13)
+#define BCM_6338_USB_BULK_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 14)
+#define BCM_6338_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 15)
+#define BCM_6338_ENET0_TXDMA_IRQ (IRQ_INTERNAL_BASE + 16)
+#define BCM_6338_SDIO_IRQ (IRQ_INTERNAL_BASE + 17)
+
+/*
* 6348 irqs
*/
#define BCM_6348_TIMER_IRQ (IRQ_INTERNAL_BASE + 0)
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
index 7b1dbb3..3249e8c 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
@@ -15,6 +15,20 @@
/* Clock Control register */
#define PERF_CKCTL_REG 0x4
+#define CKCTL_6338_ADSLPHY_EN (1 << 0)
+#define CKCTL_6338_MPI_EN (1 << 1)
+#define CKCTL_6338_DRAM_EN (1 << 2)
+#define CKCTL_6338_ENET_EN (1 << 4)
+#define CKCTL_6338_USBS_EN (1 << 4)
+#define CKCTL_6338_SAR_EN (1 << 5)
+#define CKCTL_6338_SPI_EN (1 << 9)
+
+#define CKCTL_6338_ALL_SAFE_EN (CKCTL_6338_ADSLPHY_EN | \
+ CKCTL_6338_MPI_EN | \
+ CKCTL_6338_ENET_EN | \
+ CKCTL_6338_SAR_EN | \
+ CKCTL_6338_SPI_EN)
+
#define CKCTL_6348_ADSLPHY_EN (1 << 0)
#define CKCTL_6348_MPI_EN (1 << 1)
#define CKCTL_6348_SDRAM_EN (1 << 2)
@@ -83,6 +97,25 @@
/* Soft Reset register */
#define PERF_SOFTRESET_REG 0x28
+#define SOFTRESET_6338_SPI_MASK (1 << 0)
+#define SOFTRESET_6338_ENET_MASK (1 << 2)
+#define SOFTRESET_6338_USBH_MASK (1 << 3)
+#define SOFTRESET_6338_USBS_MASK (1 << 4)
+#define SOFTRESET_6338_ADSL_MASK (1 << 5)
+#define SOFTRESET_6338_DMAMEM_MASK (1 << 6)
+#define SOFTRESET_6338_SAR_MASK (1 << 7)
+#define SOFTRESET_6338_ACLC_MASK (1 << 8)
+#define SOFTRESET_6338_ADSLMIPSPLL_MASK (1 << 10)
+#define SOFTRESET_6338_ALL (SOFTRESET_6338_SPI_MASK | \
+ SOFTRESET_6338_ENET_MASK | \
+ SOFTRESET_6338_USBH_MASK | \
+ SOFTRESET_6338_USBS_MASK | \
+ SOFTRESET_6338_ADSL_MASK | \
+ SOFTRESET_6338_DMAMEM_MASK | \
+ SOFTRESET_6338_SAR_MASK | \
+ SOFTRESET_6338_ACLC_MASK | \
+ SOFTRESET_6338_ADSLMIPSPLL_MASK)
+
#define SOFTRESET_6348_SPI_MASK (1 << 0)
#define SOFTRESET_6348_ENET_MASK (1 << 2)
#define SOFTRESET_6348_USBH_MASK (1 << 3)
diff --git a/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h b/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h
index 1a5c4b1..80c3aa2 100644
--- a/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h
@@ -24,7 +24,7 @@
#define cpu_has_smartmips 0
#define cpu_has_vtag_icache 0
-#if !defined(BCMCPU_RUNTIME_DETECT) && defined(CONFIG_BCMCPU_IS_6348)
+#if !defined(BCMCPU_RUNTIME_DETECT) && (defined(CONFIG_BCMCPU_IS_6348) || defined(CONFIG_CPU_IS_6338))
#define cpu_has_dc_aliases 0
#endif
next reply other threads:[~2009-08-07 21:48 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-07 21:46 Florian Fainelli [this message]
2009-08-08 18:48 ` [PATCH 4/8] bcm63xx: add support for the BCM6338 SoC Ralf Baechle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200908072346.45245.florian@openwrt.org \
--to=florian@openwrt.org \
--cc=linux-mips@linux-mips.org \
--cc=mbizon@freebox.fr \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.