From: npiggin@suse.de
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-fsdevel@vger.kernel.org, linux-ext4@vger.kernel.org,
Christoph Hellwig <hch@lst.de>
Subject: [patch 5/5] ext2: convert to use the new truncate convention.
Date: Sun, 16 Aug 2009 20:25:38 +1000 [thread overview]
Message-ID: <20090816102856.846088617@suse.de> (raw)
In-Reply-To: 20090816102533.329473921@suse.de
[-- Attachment #1: ext2-new-truncate.patch --]
[-- Type: text/plain, Size: 8258 bytes --]
I also have some questions, marked with XXX.
Cc: linux-ext4@vger.kernel.org
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
---
fs/ext2/ext2.h | 1
fs/ext2/file.c | 2
fs/ext2/inode.c | 138 +++++++++++++++++++++++++++++++++++++++++++++-----------
3 files changed, 113 insertions(+), 28 deletions(-)
Index: linux-2.6/fs/ext2/inode.c
===================================================================
--- linux-2.6.orig/fs/ext2/inode.c
+++ linux-2.6/fs/ext2/inode.c
@@ -53,6 +53,8 @@ static inline int ext2_inode_is_fast_sym
inode->i_blocks - ea_blocks == 0);
}
+static void ext2_truncate_blocks(struct inode *inode, loff_t offset);
+
/*
* Called at the last iput() if i_nlink is zero.
*/
@@ -66,9 +68,10 @@ void ext2_delete_inode (struct inode * i
mark_inode_dirty(inode);
ext2_write_inode(inode, inode_needs_sync(inode));
+ /* XXX: where is truncate_inode_pages? */
inode->i_size = 0;
if (inode->i_blocks)
- ext2_truncate (inode);
+ ext2_truncate_blocks(inode, 0);
ext2_free_inode (inode);
return;
@@ -761,8 +764,33 @@ ext2_write_begin(struct file *file, stru
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
+ int ret;
+
*pagep = NULL;
- return __ext2_write_begin(file, mapping, pos, len, flags, pagep,fsdata);
+ ret = __ext2_write_begin(file, mapping, pos, len, flags, pagep,fsdata);
+ if (ret < 0) {
+ struct inode *inode = mapping->host;
+ loff_t isize = inode->i_size;
+ if (pos + len > isize)
+ ext2_truncate_blocks(inode, isize);
+ }
+ return ret;
+}
+
+static int ext2_write_end(struct file *file, struct address_space *mapping,
+ loff_t pos, unsigned len, unsigned copied,
+ struct page *page, void *fsdata)
+{
+ int ret;
+
+ ret = generic_write_end(file, mapping, pos, len, copied, page, fsdata);
+ if (ret < len) {
+ struct inode *inode = mapping->host;
+ loff_t isize = inode->i_size;
+ if (pos + len > isize)
+ ext2_truncate_blocks(inode, isize);
+ }
+ return ret;
}
static int
@@ -770,13 +798,22 @@ ext2_nobh_write_begin(struct file *file,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
+ int ret;
+
/*
* Dir-in-pagecache still uses ext2_write_begin. Would have to rework
* directory handling code to pass around offsets rather than struct
* pages in order to make this work easily.
*/
- return nobh_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
+ ret = nobh_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
ext2_get_block);
+ if (ret < 0) {
+ struct inode *inode = mapping->host;
+ loff_t isize = inode->i_size;
+ if (pos + len > isize)
+ ext2_truncate_blocks(inode, isize);
+ }
+ return ret;
}
static int ext2_nobh_writepage(struct page *page,
@@ -796,9 +833,15 @@ ext2_direct_IO(int rw, struct kiocb *ioc
{
struct file *file = iocb->ki_filp;
struct inode *inode = file->f_mapping->host;
+ ssize_t ret;
- return blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
+ ret = blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
offset, nr_segs, ext2_get_block, NULL);
+ if (ret < 0 && (rw & WRITE)) {
+ loff_t isize = inode->i_size;
+ ext2_truncate_blocks(inode, isize);
+ }
+ return ret;
}
static int
@@ -813,7 +856,7 @@ const struct address_space_operations ex
.writepage = ext2_writepage,
.sync_page = block_sync_page,
.write_begin = ext2_write_begin,
- .write_end = generic_write_end,
+ .write_end = ext2_write_end,
.bmap = ext2_bmap,
.direct_IO = ext2_direct_IO,
.writepages = ext2_writepages,
@@ -1020,7 +1063,7 @@ static void ext2_free_branches(struct in
ext2_free_data(inode, p, q);
}
-void ext2_truncate(struct inode *inode)
+static void __ext2_truncate_blocks(struct inode *inode, loff_t offset)
{
__le32 *i_data = EXT2_I(inode)->i_data;
struct ext2_inode_info *ei = EXT2_I(inode);
@@ -1032,27 +1075,8 @@ void ext2_truncate(struct inode *inode)
int n;
long iblock;
unsigned blocksize;
-
- if (!(S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
- S_ISLNK(inode->i_mode)))
- return;
- if (ext2_inode_is_fast_symlink(inode))
- return;
- if (IS_APPEND(inode) || IS_IMMUTABLE(inode))
- return;
-
blocksize = inode->i_sb->s_blocksize;
- iblock = (inode->i_size + blocksize-1)
- >> EXT2_BLOCK_SIZE_BITS(inode->i_sb);
-
- if (mapping_is_xip(inode->i_mapping))
- xip_truncate_page(inode->i_mapping, inode->i_size);
- else if (test_opt(inode->i_sb, NOBH))
- nobh_truncate_page(inode->i_mapping,
- inode->i_size, ext2_get_block);
- else
- block_truncate_page(inode->i_mapping,
- inode->i_size, ext2_get_block);
+ iblock = (offset + blocksize-1) >> EXT2_BLOCK_SIZE_BITS(inode->i_sb);
n = ext2_block_to_path(inode, iblock, offsets, NULL);
if (n == 0)
@@ -1120,6 +1144,59 @@ do_indirects:
ext2_discard_reservation(inode);
mutex_unlock(&ei->truncate_mutex);
+}
+
+static void ext2_truncate_blocks(struct inode *inode, loff_t offset)
+{
+ /*
+ * XXX: it seems like a bug here that we don't allow
+ * IS_APPEND inode to have blocks-past-i_size trimmed off.
+ * review and fix this.
+ */
+ if (!(S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
+ S_ISLNK(inode->i_mode)))
+ return -EINVAL;
+ if (ext2_inode_is_fast_symlink(inode))
+ return -EINVAL;
+ if (IS_APPEND(inode) || IS_IMMUTABLE(inode))
+ return -EPERM;
+ __ext2_truncate_blocks(inode, offset);
+}
+
+int ext2_setsize(struct inode *inode, loff_t newsize)
+{
+ loff_t oldsize;
+ int error;
+
+ error = inode_newsize_ok(inode, newsize);
+ if (error)
+ return error;
+
+ if (!(S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
+ S_ISLNK(inode->i_mode)))
+ return -EINVAL;
+ if (ext2_inode_is_fast_symlink(inode))
+ return -EINVAL;
+ if (IS_APPEND(inode) || IS_IMMUTABLE(inode))
+ return -EPERM;
+
+ if (mapping_is_xip(inode->i_mapping))
+ error = xip_truncate_page(inode->i_mapping, newsize);
+ else if (test_opt(inode->i_sb, NOBH))
+ error = nobh_truncate_page(inode->i_mapping,
+ newsize, ext2_get_block);
+ else
+ error = block_truncate_page(inode->i_mapping,
+ newsize, ext2_get_block);
+ if (error)
+ return error;
+
+ oldsize = inode->i_size;
+ i_size_write(inode, newsize);
+ truncate_pagecache(inode, oldsize, newsize);
+
+ __ext2_truncate_blocks(inode, newsize);
+
inode->i_mtime = inode->i_ctime = CURRENT_TIME_SEC;
if (inode_needs_sync(inode)) {
sync_mapping_buffers(inode->i_mapping);
@@ -1127,6 +1204,8 @@ do_indirects:
} else {
mark_inode_dirty(inode);
}
+
+ return 0;
}
static struct ext2_inode *ext2_get_inode(struct super_block *sb, ino_t ino,
@@ -1459,6 +1538,13 @@ int ext2_setattr(struct dentry *dentry,
if (error)
return error;
}
+ if (iattr->ia_valid & ATTR_SIZE) {
+ error = ext2_setsize(inode, iattr->ia_size);
+ if (error)
+ return error;
+ iattr->ia_valid &= ~ATTR_SIZE;
+ /* strip ATTR_SIZE for inode_setattr */
+ }
error = inode_setattr(inode, iattr);
if (!error && (iattr->ia_valid & ATTR_MODE))
error = ext2_acl_chmod(inode);
Index: linux-2.6/fs/ext2/ext2.h
===================================================================
--- linux-2.6.orig/fs/ext2/ext2.h
+++ linux-2.6/fs/ext2/ext2.h
@@ -122,7 +122,6 @@ extern int ext2_write_inode (struct inod
extern void ext2_delete_inode (struct inode *);
extern int ext2_sync_inode (struct inode *);
extern int ext2_get_block(struct inode *, sector_t, struct buffer_head *, int);
-extern void ext2_truncate (struct inode *);
extern int ext2_setattr (struct dentry *, struct iattr *);
extern void ext2_set_inode_flags(struct inode *inode);
extern void ext2_get_inode_flags(struct ext2_inode_info *);
Index: linux-2.6/fs/ext2/file.c
===================================================================
--- linux-2.6.orig/fs/ext2/file.c
+++ linux-2.6/fs/ext2/file.c
@@ -77,13 +77,13 @@ const struct file_operations ext2_xip_fi
#endif
const struct inode_operations ext2_file_inode_operations = {
- .truncate = ext2_truncate,
#ifdef CONFIG_EXT2_FS_XATTR
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
.listxattr = ext2_listxattr,
.removexattr = generic_removexattr,
#endif
+ .new_truncate = 1,
.setattr = ext2_setattr,
.permission = ext2_permission,
.fiemap = ext2_fiemap,
next prev parent reply other threads:[~2009-08-16 10:31 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-16 10:25 [patch 0/5] new truncate sequence npiggin
2009-08-16 10:25 ` [patch 1/5] fs: new truncate helpers npiggin
2009-08-16 10:25 ` [patch 2/5] fs: use " npiggin
2009-08-16 10:25 ` npiggin-l3A5Bk7waGM
2009-08-16 10:25 ` [patch 3/5] fs: introduce new truncate sequence npiggin
2009-08-16 19:39 ` Christoph Hellwig
2009-08-17 6:38 ` Nick Piggin
2009-08-17 16:41 ` Nick Piggin
2009-08-17 18:06 ` Christoph Hellwig
2009-08-18 9:19 ` Nick Piggin
2009-08-16 10:25 ` [patch 4/5] tmpfs: convert to use the new truncate convention npiggin
2009-08-16 18:38 ` Hugh Dickins
2009-08-17 7:32 ` Nick Piggin
2009-08-16 10:25 ` npiggin [this message]
2009-08-16 20:16 ` [patch 5/5] ext2: " Christoph Hellwig
2009-08-17 6:42 ` Nick Piggin
2009-08-17 11:09 ` Boaz Harrosh
2009-08-17 16:44 ` Nick Piggin
-- strict thread matches above, loose matches on Subject: below --
2009-07-10 7:30 [patch 0/5] new truncate sequence patchset npiggin
2009-07-10 7:30 ` [patch 5/5] ext2: convert to use the new truncate convention npiggin
2009-09-01 18:29 ` Jan Kara
2009-09-02 9:14 ` Nick Piggin
2009-09-02 11:14 ` Jan Kara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090816102856.846088617@suse.de \
--to=npiggin@suse.de \
--cc=akpm@linux-foundation.org \
--cc=hch@lst.de \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.