From: Subrata Modak <subrata@linux.vnet.ibm.com>
To: LTP Mailing List <ltp-list@lists.sourceforge.net>
Cc: Sachin P Sant <sachinp@linux.vnet.ibm.com>,
Mike Frysinger <vapier@gentoo.org>,
Michael Reed <mreed10@us.ibm.com>, Nate Straz <nate@refried.org>,
Paul Larson <paul.larson@ubuntu.com>,
Manoj Iyer <manoj.iyer@ubuntu.com>,
Balbir Singh <balbir@linux.vnet.ibm.com>
Subject: [LTP] [RESULTS v2] Results of test run for "Fault Injection Framework"
Date: Mon, 17 Aug 2009 17:40:50 +0530 [thread overview]
Message-ID: <20090817121048.8902.12251.sendpatchset@subratamodak.linux.ibm.com> (raw)
In-Reply-To: <20090817120835.8902.4597.sendpatchset@subratamodak.linux.ibm.com>
Again comes the actual test output the framework will generate. Below are the test
results with and without this Infrastructure on my following machine:
# uname -a
Linux 2.6.29-gcov #1 SMP Fri Jun 19 12:14:27 IST 2009 i686 i686 i386 GNU/Linux
================================================================================
# ./runltp -f math -o ltp_without_fault_injection.out
================================================================================
<<<test_start>>>
tag=abs01 stime=1250492520
cmdline="abs01"
contacts=""
analysis=exit
<<<test_output>>>
abs01 1 TPASS : Test passed
abs01 2 TPASS : Test passed
abs01 3 TPASS : Test passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=atof01 stime=1250492520
cmdline="atof01"
contacts=""
analysis=exit
<<<test_output>>>
atof01 1 TPASS : Test passed
atof01 2 TPASS : Test passed
atof01 3 TPASS : Test passed
atof01 4 TPASS : Test passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fptest01 stime=1250492520
cmdline="fptest01"
contacts=""
analysis=exit
<<<test_output>>>
fptest01 1 TPASS : PASS
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fptest02 stime=1250492520
cmdline="fptest02"
contacts=""
analysis=exit
<<<test_output>>>
fptest02 1 TPASS : PASS
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=nextafter01 stime=1250492520
cmdline="nextafter01"
contacts=""
analysis=exit
<<<test_output>>>
nextafter01 1 TPASS : Test passed
nextafter01 2 TPASS : Test passed
nextafter01 3 TPASS : Test passed
incrementing stop
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
================================================================================
================================================================================
# ./runltp -f math -F 6,15 -o ltp_with_fault_injection.out
================================================================================
<<<test_start>>>
tag=abs01 stime=1250492531
cmdline="abs01"
contacts=""
analysis=exit
<<<test_output>>>
abs01 1 TPASS : Test passed
abs01 2 TPASS : Test passed
abs01 3 TPASS : Test passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=abs01_loop_1under_fault_kernel stime=1250492531
cmdline="$LTPROOT/tools/insert_kernel_faults.sh 15; abs01"
contacts=""
analysis=exit
<<<test_output>>>
abs01 1 TPASS : Test passed
abs01 2 TPASS : Test passed
abs01 3 TPASS : Test passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=abs01_loop_2under_fault_kernel stime=1250492531
cmdline=" abs01 "
contacts=""
analysis=exit
<<<test_output>>>
abs01 1 TPASS : Test passed
abs01 2 TPASS : Test passed
abs01 3 TPASS : Test passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=abs01_loop_3under_fault_kernel stime=1250492531
cmdline=" abs01 "
contacts=""
analysis=exit
<<<test_output>>>
abs01 1 TPASS : Test passed
abs01 2 TPASS : Test passed
abs01 3 TPASS : Test passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=abs01_loop_4under_fault_kernel stime=1250492531
cmdline=" abs01 "
contacts=""
analysis=exit
<<<test_output>>>
abs01 1 TPASS : Test passed
abs01 2 TPASS : Test passed
abs01 3 TPASS : Test passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=abs01_loop_5under_fault_kernel stime=1250492531
cmdline=" abs01 "
contacts=""
analysis=exit
<<<test_output>>>
abs01 1 TPASS : Test passed
abs01 2 TPASS : Test passed
abs01 3 TPASS : Test passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=abs01_loop_6under_fault_kernel stime=1250492531
cmdline=" abs01 ; $LTPROOT/tools/restore_kernel_faults_default.sh; RC=$?; while [ $RC -ne 0 ]; do $LTPROOT/tools/restore_kernel_faults_default.sh; RC=$?; done"
contacts=""
analysis=exit
<<<test_output>>>
abs01 1 TPASS : Test passed
abs01 2 TPASS : Test passed
abs01 3 TPASS : Test passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=atof01 stime=1250492531
cmdline="atof01"
contacts=""
analysis=exit
<<<test_output>>>
atof01 1 TPASS : Test passed
atof01 2 TPASS : Test passed
atof01 3 TPASS : Test passed
atof01 4 TPASS : Test passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=atof01_loop_1under_fault_kernel stime=1250492531
cmdline="$LTPROOT/tools/insert_kernel_faults.sh 15; atof01"
contacts=""
analysis=exit
<<<test_output>>>
atof01 1 TPASS : Test passed
atof01 2 TPASS : Test passed
atof01 3 TPASS : Test passed
atof01 4 TPASS : Test passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=atof01_loop_2under_fault_kernel stime=1250492531
cmdline=" atof01 "
contacts=""
analysis=exit
<<<test_output>>>
atof01 1 TPASS : Test passed
atof01 2 TPASS : Test passed
atof01 3 TPASS : Test passed
atof01 4 TPASS : Test passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=atof01_loop_3under_fault_kernel stime=1250492531
cmdline=" atof01 "
contacts=""
analysis=exit
<<<test_output>>>
atof01 1 TPASS : Test passed
atof01 2 TPASS : Test passed
atof01 3 TPASS : Test passed
atof01 4 TPASS : Test passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=atof01_loop_4under_fault_kernel stime=1250492531
cmdline=" atof01 "
contacts=""
analysis=exit
<<<test_output>>>
atof01 1 TPASS : Test passed
atof01 2 TPASS : Test passed
atof01 3 TPASS : Test passed
atof01 4 TPASS : Test passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=atof01_loop_5under_fault_kernel stime=1250492531
cmdline=" atof01 "
contacts=""
analysis=exit
<<<test_output>>>
atof01 1 TPASS : Test passed
atof01 2 TPASS : Test passed
atof01 3 TPASS : Test passed
atof01 4 TPASS : Test passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=atof01_loop_6under_fault_kernel stime=1250492531
cmdline=" atof01 ; $LTPROOT/tools/restore_kernel_faults_default.sh; RC=$?; while [ $RC -ne 0 ]; do $LTPROOT/tools/restore_kernel_faults_default.sh; RC=$?; done"
contacts=""
analysis=exit
<<<test_output>>>
atof01 1 TPASS : Test passed
atof01 2 TPASS : Test passed
atof01 3 TPASS : Test passed
atof01 4 TPASS : Test passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fptest01 stime=1250492531
cmdline="fptest01"
contacts=""
analysis=exit
<<<test_output>>>
fptest01 1 TPASS : PASS
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fptest01_loop_1under_fault_kernel stime=1250492531
cmdline="$LTPROOT/tools/insert_kernel_faults.sh 15; fptest01"
contacts=""
analysis=exit
<<<test_output>>>
fptest01 1 TPASS : PASS
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fptest01_loop_2under_fault_kernel stime=1250492531
cmdline=" fptest01 "
contacts=""
analysis=exit
<<<test_output>>>
fptest01 1 TPASS : PASS
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fptest01_loop_3under_fault_kernel stime=1250492531
cmdline=" fptest01 "
contacts=""
analysis=exit
<<<test_output>>>
fptest01 1 TPASS : PASS
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fptest01_loop_4under_fault_kernel stime=1250492531
cmdline=" fptest01 "
contacts=""
analysis=exit
<<<test_output>>>
fptest01 1 TPASS : PASS
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fptest01_loop_5under_fault_kernel stime=1250492531
cmdline=" fptest01 "
contacts=""
analysis=exit
<<<test_output>>>
fptest01 1 TPASS : PASS
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fptest01_loop_6under_fault_kernel stime=1250492531
cmdline=" fptest01 ; $LTPROOT/tools/restore_kernel_faults_default.sh; RC=$?; while [ $RC -ne 0 ]; do $LTPROOT/tools/restore_kernel_faults_default.sh; RC=$?; done"
contacts=""
analysis=exit
<<<test_output>>>
fptest01 1 TPASS : PASS
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fptest02 stime=1250492531
cmdline="fptest02"
contacts=""
analysis=exit
<<<test_output>>>
fptest02 1 TPASS : PASS
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fptest02_loop_1under_fault_kernel stime=1250492531
cmdline="$LTPROOT/tools/insert_kernel_faults.sh 15; fptest02"
contacts=""
analysis=exit
<<<test_output>>>
fptest02 1 TPASS : PASS
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fptest02_loop_2under_fault_kernel stime=1250492531
cmdline=" fptest02 "
contacts=""
analysis=exit
<<<test_output>>>
fptest02 1 TPASS : PASS
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fptest02_loop_3under_fault_kernel stime=1250492531
cmdline=" fptest02 "
contacts=""
analysis=exit
<<<test_output>>>
fptest02 1 TPASS : PASS
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fptest02_loop_4under_fault_kernel stime=1250492531
cmdline=" fptest02 "
contacts=""
analysis=exit
<<<test_output>>>
fptest02 1 TPASS : PASS
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fptest02_loop_5under_fault_kernel stime=1250492531
cmdline=" fptest02 "
contacts=""
analysis=exit
<<<test_output>>>
fptest02 1 TPASS : PASS
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fptest02_loop_6under_fault_kernel stime=1250492531
cmdline=" fptest02 ; $LTPROOT/tools/restore_kernel_faults_default.sh; RC=$?; while [ $RC -ne 0 ]; do $LTPROOT/tools/restore_kernel_faults_default.sh; RC=$?; done"
contacts=""
analysis=exit
<<<test_output>>>
fptest02 1 TPASS : PASS
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=nextafter01 stime=1250492531
cmdline="nextafter01"
contacts=""
analysis=exit
<<<test_output>>>
nextafter01 1 TPASS : Test passed
nextafter01 2 TPASS : Test passed
nextafter01 3 TPASS : Test passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=nextafter01_loop_1under_fault_kernel stime=1250492531
cmdline="$LTPROOT/tools/insert_kernel_faults.sh 15; nextafter01"
contacts=""
analysis=exit
<<<test_output>>>
nextafter01 1 TPASS : Test passed
nextafter01 2 TPASS : Test passed
nextafter01 3 TPASS : Test passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=nextafter01_loop_2under_fault_kernel stime=1250492531
cmdline=" nextafter01 "
contacts=""
analysis=exit
<<<test_output>>>
nextafter01 1 TPASS : Test passed
nextafter01 2 TPASS : Test passed
nextafter01 3 TPASS : Test passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=nextafter01_loop_3under_fault_kernel stime=1250492531
cmdline=" nextafter01 "
contacts=""
analysis=exit
<<<test_output>>>
nextafter01 1 TPASS : Test passed
nextafter01 2 TPASS : Test passed
nextafter01 3 TPASS : Test passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=nextafter01_loop_4under_fault_kernel stime=1250492531
cmdline=" nextafter01 "
contacts=""
analysis=exit
<<<test_output>>>
nextafter01 1 TPASS : Test passed
nextafter01 2 TPASS : Test passed
nextafter01 3 TPASS : Test passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=nextafter01_loop_5under_fault_kernel stime=1250492531
cmdline=" nextafter01 "
contacts=""
analysis=exit
<<<test_output>>>
nextafter01 1 TPASS : Test passed
nextafter01 2 TPASS : Test passed
nextafter01 3 TPASS : Test passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=nextafter01_loop_6under_fault_kernel stime=1250492531
cmdline=" nextafter01 ; $LTPROOT/tools/restore_kernel_faults_default.sh; RC=$?; while [ $RC -ne 0 ]; do $LTPROOT/tools/restore_kernel_faults_default.sh; RC=$?; done"
contacts=""
analysis=exit
<<<test_output>>>
nextafter01 1 TPASS : Test passed
nextafter01 2 TPASS : Test passed
nextafter01 3 TPASS : Test passed
incrementing stop
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=2
<<<test_end>>>
================================================================================
Regards--
Subrata
------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Ltp-list mailing list
Ltp-list@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ltp-list
next prev parent reply other threads:[~2009-08-17 12:11 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-17 12:08 [LTP] [PATCH v2 00/05] Integration of "Fault Injection Framework" into LTP Subrata Modak
2009-08-17 12:08 ` [LTP] [PATCH v2 01/05] Provide all necessary information through ltp/README Subrata Modak
2009-08-17 12:09 ` [LTP] [PATCH v2 02/05] Add Script which would actually do the job of injecting faults Subrata Modak
2009-08-17 17:11 ` Garrett Cooper
2009-08-17 17:44 ` Subrata Modak
2009-08-17 12:09 ` [LTP] [PATCH v2 03/05] Add Script so the kernel is restored back to its original pristine form Subrata Modak
2009-08-17 12:10 ` [LTP] [PATCH v2 04/05] Add Script which will be at the heart of this infrastructure Subrata Modak
2009-08-17 12:10 ` [LTP] [PATCH v2 05/05] Add the necessary Interface and Option through "runltp" Subrata Modak
2009-08-17 12:10 ` Subrata Modak [this message]
2009-08-22 13:01 ` [LTP] [PATCH v2 00/05] Integration of "Fault Injection Framework" into LTP Subrata Modak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090817121048.8902.12251.sendpatchset@subratamodak.linux.ibm.com \
--to=subrata@linux.vnet.ibm.com \
--cc=balbir@linux.vnet.ibm.com \
--cc=ltp-list@lists.sourceforge.net \
--cc=manoj.iyer@ubuntu.com \
--cc=mreed10@us.ibm.com \
--cc=nate@refried.org \
--cc=paul.larson@ubuntu.com \
--cc=sachinp@linux.vnet.ibm.com \
--cc=vapier@gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.