From: "Kashyap, Desai" <kashyap.desai@lsi.com>
To: linux-scsi@vger.kernel.org
Cc: James.Bottomley@HansenPartnership.com, Eric.Moore@lsi.com,
Sathya.Prakash@lsi.com
Subject: [PATCH 1/7] mpt2sas : [Resend] Rescan topology from Interrupt context instead of work thread
Date: Thu, 20 Aug 2009 13:20:54 +0530 [thread overview]
Message-ID: <20090820075046.GB17192@lsi.com> (raw)
Following host reset its possible that the controller firmware could
assign new handles for devices, as well as adding or deleting devices. There is
code in the driver that will rescan the topology folowing host reset; updating
device handles, and remove devices that are no longer responding. This patch
will improve the responsivness by moving this rescaning from the delayed hotplug
worker thread to immediately following the host reset.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Reviewed-by: Eric Moore <Eric.moore@lsi.com>
---
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 35a1386..cc5a8da 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -3536,5 +3536,8 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
ioc->ioc_reset_in_progress = 0;
spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+
+ if (!r)
+ _base_reset_handler(ioc, MPT2_IOC_RUNNING);
return r;
}
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
index acdcff1..998a7b8 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
@@ -119,6 +119,7 @@
#define MPT2_IOC_PRE_RESET 1 /* prior to host reset */
#define MPT2_IOC_AFTER_RESET 2 /* just after host reset */
#define MPT2_IOC_DONE_RESET 3 /* links re-initialized */
+#define MPT2_IOC_RUNNING 4 /* shost running */
/*
* logging format
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 2e9a444..471c3b6 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -103,7 +103,6 @@ struct sense_info {
};
-#define MPT2SAS_RESCAN_AFTER_HOST_RESET (0xFFFF)
/**
* struct fw_event_work - firmware event struct
* @list: link list framework
@@ -2405,27 +2404,6 @@ _scsih_check_topo_delete_events(struct MPT2SAS_ADAPTER *ioc,
}
/**
- * _scsih_queue_rescan - queue a topology rescan from user context
- * @ioc: per adapter object
- *
- * Return nothing.
- */
-static void
-_scsih_queue_rescan(struct MPT2SAS_ADAPTER *ioc)
-{
- struct fw_event_work *fw_event;
-
- if (ioc->wait_for_port_enable_to_complete)
- return;
- fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC);
- if (!fw_event)
- return;
- fw_event->event = MPT2SAS_RESCAN_AFTER_HOST_RESET;
- fw_event->ioc = ioc;
- _scsih_fw_event_add(ioc, fw_event);
-}
-
-/**
* _scsih_flush_running_cmds - completing outstanding commands.
* @ioc: per adapter object
*
@@ -2456,46 +2434,6 @@ _scsih_flush_running_cmds(struct MPT2SAS_ADAPTER *ioc)
}
/**
- * mpt2sas_scsih_reset_handler - reset callback handler (for scsih)
- * @ioc: per adapter object
- * @reset_phase: phase
- *
- * The handler for doing any required cleanup or initialization.
- *
- * The reset phase can be MPT2_IOC_PRE_RESET, MPT2_IOC_AFTER_RESET,
- * MPT2_IOC_DONE_RESET
- *
- * Return nothing.
- */
-void
-mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
-{
- switch (reset_phase) {
- case MPT2_IOC_PRE_RESET:
- dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
- "MPT2_IOC_PRE_RESET\n", ioc->name, __func__));
- _scsih_fw_event_off(ioc);
- break;
- case MPT2_IOC_AFTER_RESET:
- dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
- "MPT2_IOC_AFTER_RESET\n", ioc->name, __func__));
- if (ioc->tm_cmds.status & MPT2_CMD_PENDING) {
- ioc->tm_cmds.status |= MPT2_CMD_RESET;
- mpt2sas_base_free_smid(ioc, ioc->tm_cmds.smid);
- complete(&ioc->tm_cmds.done);
- }
- _scsih_fw_event_on(ioc);
- _scsih_flush_running_cmds(ioc);
- break;
- case MPT2_IOC_DONE_RESET:
- dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
- "MPT2_IOC_DONE_RESET\n", ioc->name, __func__));
- _scsih_queue_rescan(ioc);
- break;
- }
-}
-
-/**
* _scsih_setup_eedp - setup MPI request for EEDP transfer
* @scmd: pointer to scsi command object
* @mpi_request: pointer to the SCSI_IO reqest message frame
@@ -5156,22 +5094,9 @@ static void
_scsih_remove_unresponding_devices(struct MPT2SAS_ADAPTER *ioc)
{
struct _sas_device *sas_device, *sas_device_next;
- struct _sas_node *sas_expander, *sas_expander_next;
+ struct _sas_node *sas_expander;
struct _raid_device *raid_device, *raid_device_next;
- unsigned long flags;
- _scsih_search_responding_sas_devices(ioc);
- _scsih_search_responding_raid_devices(ioc);
- _scsih_search_responding_expanders(ioc);
-
- spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
- ioc->shost_recovery = 0;
- if (ioc->shost->shost_state == SHOST_RECOVERY) {
- printk(MPT2SAS_INFO_FMT "putting controller into "
- "SHOST_RUNNING\n", ioc->name);
- scsi_host_set_state(ioc->shost, SHOST_RUNNING);
- }
- spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
list_for_each_entry_safe(sas_device, sas_device_next,
&ioc->sas_device_list, list) {
@@ -5207,16 +5132,63 @@ _scsih_remove_unresponding_devices(struct MPT2SAS_ADAPTER *ioc)
_scsih_raid_device_remove(ioc, raid_device);
}
- list_for_each_entry_safe(sas_expander, sas_expander_next,
- &ioc->sas_expander_list, list) {
+ retry_expander_search:
+ sas_expander = NULL;
+ list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
if (sas_expander->responding) {
sas_expander->responding = 0;
continue;
}
- printk("\tremoving expander: handle(0x%04x), "
- " sas_addr(0x%016llx)\n", sas_expander->handle,
- (unsigned long long)sas_expander->sas_address);
_scsih_expander_remove(ioc, sas_expander->handle);
+ goto retry_expander_search;
+ }
+}
+
+/**
+ * mpt2sas_scsih_reset_handler - reset callback handler (for scsih)
+ * @ioc: per adapter object
+ * @reset_phase: phase
+ *
+ * The handler for doing any required cleanup or initialization.
+ *
+ * The reset phase can be MPT2_IOC_PRE_RESET, MPT2_IOC_AFTER_RESET,
+ * MPT2_IOC_DONE_RESET
+ *
+ * Return nothing.
+ */
+void
+mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
+{
+ switch (reset_phase) {
+ case MPT2_IOC_PRE_RESET:
+ dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+ "MPT2_IOC_PRE_RESET\n", ioc->name, __func__));
+ _scsih_fw_event_off(ioc);
+ break;
+ case MPT2_IOC_AFTER_RESET:
+ dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+ "MPT2_IOC_AFTER_RESET\n", ioc->name, __func__));
+ if (ioc->tm_cmds.status & MPT2_CMD_PENDING) {
+ ioc->tm_cmds.status |= MPT2_CMD_RESET;
+ mpt2sas_base_free_smid(ioc, ioc->tm_cmds.smid);
+ complete(&ioc->tm_cmds.done);
+ }
+ _scsih_fw_event_on(ioc);
+ _scsih_flush_running_cmds(ioc);
+ break;
+ case MPT2_IOC_DONE_RESET:
+ dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+ "MPT2_IOC_DONE_RESET\n", ioc->name, __func__));
+ _scsih_sas_host_refresh(ioc, 0);
+ _scsih_search_responding_sas_devices(ioc);
+ _scsih_search_responding_raid_devices(ioc);
+ _scsih_search_responding_expanders(ioc);
+ break;
+ case MPT2_IOC_RUNNING:
+ dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+ "MPT2_IOC_RUNNING\n", ioc->name, __func__));
+ _scsih_remove_unresponding_devices(ioc);
+ break;
}
}
@@ -5236,14 +5208,6 @@ _firmware_event_work(struct work_struct *work)
unsigned long flags;
struct MPT2SAS_ADAPTER *ioc = fw_event->ioc;
- /* This is invoked by calling _scsih_queue_rescan(). */
- if (fw_event->event == MPT2SAS_RESCAN_AFTER_HOST_RESET) {
- _scsih_fw_event_free(ioc, fw_event);
- _scsih_sas_host_refresh(ioc, 1);
- _scsih_remove_unresponding_devices(ioc);
- return;
- }
-
/* the queue is being flushed so ignore this event */
spin_lock_irqsave(&ioc->fw_event_lock, flags);
if (ioc->fw_events_off || ioc->remove_host) {
reply other threads:[~2009-08-20 8:12 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090820075046.GB17192@lsi.com \
--to=kashyap.desai@lsi.com \
--cc=Eric.Moore@lsi.com \
--cc=James.Bottomley@HansenPartnership.com \
--cc=Sathya.Prakash@lsi.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.