Re: LPC3250, helloworld-image, configure: error: cannot run C compiled programs

[Khem Raj <raj.khem@gmail.com>]

On (23/08/09 19:25), Dmitry Vinokurov wrote:
> Khem Raj wrote:
> >On (23/08/09 10:17), Dmitry Vinokurov wrote:
> >>>>>ERROR: '/home/raydan/work/oe/openembedded/recipes/module-init-tools/module-init-tools-cross_3.2.2.bb'
> >>>>>failed
> >>>>>--------
> >>>>>
> >>>>>I.e. bitbake again confused cross-gcc and x86-gcc. Updated my OE
> >>>>>with git pull, removed tmp/ and made rebuild -- same result.
> >>>>Looks like error is in wrong ./configure parameter:
> >>>>--host=i686-linux instead of --host=arm-oe-linux-gnueabi .
> >>>>Now I'm trying to find, why --host was set to i686 and where it can
> >>>>be changed.
> >>>its a cross package so host being i686-linux (I suppose you are building
> >>>on i686 box) is ok. Look into the config.log error message should be in
> >>>there
> >>>
> >>>-Khem
> >>Hm, "configure --help" says "--host=HOST cross-compile to build
> >>programs to run on HOST [BUILD]" and as I understand, I will run
> >>programs on ARM, so it should be 'arm-oe-linux-gnueabi'.
> >>
> >>Anyway, even if host should be x86, instead of i686-linux-gcc it
> >>finds arm-vfp-linux-gcc and fails.
> >
> >dont confuse pure cross with canadian cross. You are doing a normal
> >cross build here which means build machine is same as host machine.
> >
> >Your problem is probably because you are overriding CC and friends
> >which could be confusing (already confused) configure even more.
> >
> >Try setting CC_FOR_BUILD=<your native compiler on the build machine>
> >
> >Thanks
> >
> >-Khem
> Thank you for your help. I'm newbie in OE and crosscompiling at all
> and may confuse some things.
> 
> Just now I've tried to build some not so simple as helloworld but
> not so complicated as kernel -- bc calculator. And I'd like to say
> that during configure stage it sets:
> --build=i686-linux --host=arm-oe-linux-gnueabi --target=arm-oe-linux-gnueabi
> 
> Builded bc works fine on my board and this is normal, not canadian,
> cross build.

its a target package being built on build machine. Your build was failing to compile a package which
will run on your host (similar to cross compilers) they are not same
cases. module-init-tools would be analogically similar to bc but not
module-init-tools-cross which is the package you reported failing.


> 
> --
> Best Regards,
> Dmitry Vinokurov
> 
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel