From mboxrd@z Thu Jan  1 00:00:00 1970
From: Pasi =?iso-8859-1?Q?K=E4rkk=E4inen?= <pasik@iki.fi>
Subject: Re: Xen Paravirt Operations Domain 0 Serial Console
	Problem
Date: Mon, 24 Aug 2009 19:44:16 +0300
Message-ID: <20090824164416.GR19938@edu.joroinen.fi>
References: <4A92BD31.2040406@asiasoftsea.net>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Return-path: <xen-devel-bounces@lists.xensource.com>
Content-Disposition: inline
In-Reply-To: <4A92BD31.2040406@asiasoftsea.net>
List-Unsubscribe: <http://lists.xensource.com/mailman/listinfo/xen-devel>,
	<mailto:xen-devel-request@lists.xensource.com?subject=unsubscribe>
List-Post: <mailto:xen-devel@lists.xensource.com>
List-Help: <mailto:xen-devel-request@lists.xensource.com?subject=help>
List-Subscribe: <http://lists.xensource.com/mailman/listinfo/xen-devel>,
	<mailto:xen-devel-request@lists.xensource.com?subject=subscribe>
Sender: xen-devel-bounces@lists.xensource.com
Errors-To: xen-devel-bounces@lists.xensource.com
To: "Mr. Teo En Ming (Zhang Enming)" <enming.teo@asiasoftsea.net>
Cc: xen-devel@lists.xensource.com
List-Id: xen-devel@lists.xenproject.org

On Tue, Aug 25, 2009 at 12:17:53AM +0800, Mr. Teo En Ming (Zhang Enming) wrote:
> Hi All,
> 
> I have tried to configure serial console for Xen hypervisor, dom 0 
> kernel and Linux login but it does not seem to be working.
> 
> Here is my grub configuration for serial console:
> 
> title Fedora (2.6.31-rc6-enming.teo) Serial Console
>         root (hd0,0)
>         kernel /xen.gz iommu=1 com1=115200,8n1 console=com1
>         module /vmlinuz-2.6.31-rc6-enming.teo ro 
> root=/dev/mapper/vg_fedora11_host-lv_root selinux=0 console=ttyS0,115200
>         module /initrd-2.6.31-rc6-enming.teo.img
> 

http://wiki.xensource.com/xenwiki/XenParavirtOps

paste from that page:


Working example grub.conf with serial console output: 

title pv_ops dom0-test (2.6.29-rc7-tip) with serial console
        root (hd0,0)
        kernel /xen-3.3.gz dom0_mem=1024M loglvl=all guest_loglvl=all com1=19200,8n1 console=com1
        module /vmlinuz-2.6.29-rc7-tip ro root=/dev/vg00/lv01 console=hvc0 earlyprintk=xen
        module /initrd-2.6.29-rc7-tip.img


> Is the above configuration correct? On my Intel Desktop Board DQ45CB, I 
> have a COM1 header on the PCB and I have connected an external serial 
> port to this header and also enabled COM1 in the BIOS.
> 
> After selecting the above entry in GRUB still on VGA, a cursor at the 
> top left corner of the monitor shows up, which means Xen and Dom 0 
> kernel are booting up on the serial console and not on VGA.
> 
> However, after some time, a login prompt finally displays on my VGA 
> monitor! Isn't it NOT supposed to show up on VGA and should show up in 
> serial console instead?
> 

You also need to have the gettys configured properly.

-- Pasi