From: Robert Love <robert.w.love@intel.com>
To: James.Bottomley@HansenPartnership.com, linux-scsi@vger.kernel.org
Cc: Chris Leech <christopher.leech@intel.com>,
Robert Love <robert.w.love@intel.com>
Subject: [PATCH 19/64] fcoe: split out per interface setup
Date: Tue, 25 Aug 2009 14:00:07 -0700 [thread overview]
Message-ID: <20090825210007.1553.54017.stgit@localhost.localdomain> (raw)
In-Reply-To: <20090825205826.1553.94414.stgit@localhost.localdomain>
From: Chris Leech <christopher.leech@intel.com>
fcoe_netdev_config() is called during initialization of a libfc instance.
Much of what was there only needs to be done once for each net_device.
The same goes for the corresponding cleanup.
The FIP controller initialization is moved to interface creation time.
Otherwise it will keep getting re-initialized for every VN_Port once NPIV is
enabled.
fcoe_if_destroy() has some reordering to deal with the changes. Receives are
not stopped until after fcoe_interface_put() is called, but transmits must be
stopped before. So there is some care to stop libfc transmits and the
transmit backlog timer, then call fcoe_interface_put which will stop receives
and cleanup the FIP controller, then the receive queues can be cleaned and the
port freed.
Signed-off-by: Chris Leech <christopher.leech@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
---
drivers/scsi/fcoe/fcoe.c | 267 +++++++++++++++++++++++++---------------------
1 files changed, 148 insertions(+), 119 deletions(-)
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index d1d6b3b..63aeeca 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -138,6 +138,82 @@ static struct scsi_host_template fcoe_shost_template = {
.max_sectors = 0xffff,
};
+static int fcoe_fip_recv(struct sk_buff *skb, struct net_device *dev,
+ struct packet_type *ptype,
+ struct net_device *orig_dev);
+/**
+ * fcoe_interface_setup()
+ * @fcoe: new fcoe_interface
+ * @netdev : ptr to the associated netdevice struct
+ *
+ * Returns : 0 for success
+ */
+static int fcoe_interface_setup(struct fcoe_interface *fcoe,
+ struct net_device *netdev)
+{
+ struct fcoe_ctlr *fip = &fcoe->ctlr;
+ struct netdev_hw_addr *ha;
+ u8 flogi_maddr[ETH_ALEN];
+
+ fcoe->netdev = netdev;
+
+ /* Do not support for bonding device */
+ if ((netdev->priv_flags & IFF_MASTER_ALB) ||
+ (netdev->priv_flags & IFF_SLAVE_INACTIVE) ||
+ (netdev->priv_flags & IFF_MASTER_8023AD)) {
+ return -EOPNOTSUPP;
+ }
+
+ /* look for SAN MAC address, if multiple SAN MACs exist, only
+ * use the first one for SPMA */
+ rcu_read_lock();
+ for_each_dev_addr(netdev, ha) {
+ if ((ha->type == NETDEV_HW_ADDR_T_SAN) &&
+ (is_valid_ether_addr(fip->ctl_src_addr))) {
+ memcpy(fip->ctl_src_addr, ha->addr, ETH_ALEN);
+ fip->spma = 1;
+ break;
+ }
+ }
+ rcu_read_unlock();
+
+ /* setup Source Mac Address */
+ if (!fip->spma)
+ memcpy(fip->ctl_src_addr, netdev->dev_addr, netdev->addr_len);
+
+ /*
+ * Add FCoE MAC address as second unicast MAC address
+ * or enter promiscuous mode if not capable of listening
+ * for multiple unicast MACs.
+ */
+ rtnl_lock();
+ memcpy(flogi_maddr, (u8[6]) FC_FCOE_FLOGI_MAC, ETH_ALEN);
+ dev_unicast_add(netdev, flogi_maddr);
+ if (fip->spma)
+ dev_unicast_add(netdev, fip->ctl_src_addr);
+ dev_mc_add(netdev, FIP_ALL_ENODE_MACS, ETH_ALEN, 0);
+ rtnl_unlock();
+
+ /*
+ * setup the receive function from ethernet driver
+ * on the ethertype for the given device
+ */
+ fcoe->fcoe_packet_type.func = fcoe_rcv;
+ fcoe->fcoe_packet_type.type = __constant_htons(ETH_P_FCOE);
+ fcoe->fcoe_packet_type.dev = netdev;
+ dev_add_pack(&fcoe->fcoe_packet_type);
+
+ fcoe->fip_packet_type.func = fcoe_fip_recv;
+ fcoe->fip_packet_type.type = htons(ETH_P_FIP);
+ fcoe->fip_packet_type.dev = netdev;
+ dev_add_pack(&fcoe->fip_packet_type);
+
+ return 0;
+}
+
+static void fcoe_fip_send(struct fcoe_ctlr *fip, struct sk_buff *skb);
+static void fcoe_update_src_mac(struct fcoe_ctlr *fip, u8 *old, u8 *new);
+
/**
* fcoe_interface_create()
* @netdev: network interface
@@ -155,12 +231,55 @@ static struct fcoe_interface *fcoe_interface_create(struct net_device *netdev)
}
kref_init(&fcoe->kref);
- fcoe->netdev = netdev;
+
+ /*
+ * Initialize FIP.
+ */
+ fcoe_ctlr_init(&fcoe->ctlr);
+ fcoe->ctlr.send = fcoe_fip_send;
+ fcoe->ctlr.update_mac = fcoe_update_src_mac;
+
+ fcoe_interface_setup(fcoe, netdev);
return fcoe;
}
/**
+ * fcoe_interface_cleanup() - clean up netdev configurations
+ * @fcoe:
+ */
+void fcoe_interface_cleanup(struct fcoe_interface *fcoe)
+{
+ struct net_device *netdev = fcoe->netdev;
+ struct fcoe_ctlr *fip = &fcoe->ctlr;
+ u8 flogi_maddr[ETH_ALEN];
+
+ /*
+ * Don't listen for Ethernet packets anymore.
+ * synchronize_net() ensures that the packet handlers are not running
+ * on another CPU. dev_remove_pack() would do that, this calls the
+ * unsyncronized version __dev_remove_pack() to avoid multiple delays.
+ */
+ __dev_remove_pack(&fcoe->fcoe_packet_type);
+ __dev_remove_pack(&fcoe->fip_packet_type);
+ synchronize_net();
+
+ /* tear-down the FCoE controller */
+ fcoe_ctlr_destroy(&fcoe->ctlr);
+
+ /* Delete secondary MAC addresses */
+ rtnl_lock();
+ memcpy(flogi_maddr, (u8[6]) FC_FCOE_FLOGI_MAC, ETH_ALEN);
+ dev_unicast_delete(netdev, flogi_maddr);
+ if (!is_zero_ether_addr(fip->data_src_addr))
+ dev_unicast_delete(netdev, fip->data_src_addr);
+ if (fip->spma)
+ dev_unicast_delete(netdev, fip->ctl_src_addr);
+ dev_mc_delete(netdev, FIP_ALL_ENODE_MACS, ETH_ALEN, 0);
+ rtnl_unlock();
+}
+
+/**
* fcoe_interface_release() - fcoe_port kref release function
* @kref: embedded reference count in an fcoe_interface struct
*/
@@ -169,6 +288,7 @@ static void fcoe_interface_release(struct kref *kref)
struct fcoe_interface *fcoe;
fcoe = container_of(kref, struct fcoe_interface, kref);
+ fcoe_interface_cleanup(fcoe);
kfree(fcoe);
}
@@ -275,31 +395,6 @@ static int fcoe_lport_config(struct fc_lport *lp)
}
/**
- * fcoe_netdev_cleanup() - clean up netdev configurations
- * @port: ptr to the fcoe_port
- */
-void fcoe_netdev_cleanup(struct fcoe_port *port)
-{
- u8 flogi_maddr[ETH_ALEN];
- struct fcoe_interface *fcoe = port->fcoe;
-
- /* Don't listen for Ethernet packets anymore */
- dev_remove_pack(&fcoe->fcoe_packet_type);
- dev_remove_pack(&fcoe->fip_packet_type);
-
- /* Delete secondary MAC addresses */
- rtnl_lock();
- memcpy(flogi_maddr, (u8[6]) FC_FCOE_FLOGI_MAC, ETH_ALEN);
- dev_unicast_delete(fcoe->netdev, flogi_maddr);
- if (!is_zero_ether_addr(fcoe->ctlr.data_src_addr))
- dev_unicast_delete(fcoe->netdev, fcoe->ctlr.data_src_addr);
- if (fcoe->ctlr.spma)
- dev_unicast_delete(fcoe->netdev, fcoe->ctlr.ctl_src_addr);
- dev_mc_delete(fcoe->netdev, FIP_ALL_ENODE_MACS, ETH_ALEN, 0);
- rtnl_unlock();
-}
-
-/**
* fcoe_queue_timer() - fcoe queue timer
* @lp: the fc_lport pointer
*
@@ -326,21 +421,10 @@ static int fcoe_netdev_config(struct fc_lport *lp, struct net_device *netdev)
u64 wwnn, wwpn;
struct fcoe_interface *fcoe;
struct fcoe_port *port;
- u8 flogi_maddr[ETH_ALEN];
- struct netdev_hw_addr *ha;
/* Setup lport private data to point to fcoe softc */
port = lport_priv(lp);
fcoe = port->fcoe;
- fcoe->ctlr.lp = lp;
- fcoe->netdev = netdev;
-
- /* Do not support for bonding device */
- if ((netdev->priv_flags & IFF_MASTER_ALB) ||
- (netdev->priv_flags & IFF_SLAVE_INACTIVE) ||
- (netdev->priv_flags & IFF_MASTER_8023AD)) {
- return -EOPNOTSUPP;
- }
/*
* Determine max frame size based on underlying device and optional
@@ -376,57 +460,12 @@ static int fcoe_netdev_config(struct fc_lport *lp, struct net_device *netdev)
port->fcoe_pending_queue_active = 0;
setup_timer(&port->timer, fcoe_queue_timer, (unsigned long)lp);
- /* look for SAN MAC address, if multiple SAN MACs exist, only
- * use the first one for SPMA */
- rcu_read_lock();
- for_each_dev_addr(netdev, ha) {
- if ((ha->type == NETDEV_HW_ADDR_T_SAN) &&
- (is_valid_ether_addr(fcoe->ctlr.ctl_src_addr))) {
- memcpy(fcoe->ctlr.ctl_src_addr, ha->addr, ETH_ALEN);
- fcoe->ctlr.spma = 1;
- break;
- }
- }
- rcu_read_unlock();
-
- /* setup Source Mac Address */
- if (!fcoe->ctlr.spma)
- memcpy(fcoe->ctlr.ctl_src_addr, netdev->dev_addr,
- netdev->addr_len);
-
wwnn = fcoe_wwn_from_mac(netdev->dev_addr, 1, 0);
fc_set_wwnn(lp, wwnn);
/* XXX - 3rd arg needs to be vlan id */
wwpn = fcoe_wwn_from_mac(netdev->dev_addr, 2, 0);
fc_set_wwpn(lp, wwpn);
- /*
- * Add FCoE MAC address as second unicast MAC address
- * or enter promiscuous mode if not capable of listening
- * for multiple unicast MACs.
- */
- rtnl_lock();
- memcpy(flogi_maddr, (u8[6]) FC_FCOE_FLOGI_MAC, ETH_ALEN);
- dev_unicast_add(netdev, flogi_maddr);
- if (fcoe->ctlr.spma)
- dev_unicast_add(netdev, fcoe->ctlr.ctl_src_addr);
- dev_mc_add(netdev, FIP_ALL_ENODE_MACS, ETH_ALEN, 0);
- rtnl_unlock();
-
- /*
- * setup the receive function from ethernet driver
- * on the ethertype for the given device
- */
- fcoe->fcoe_packet_type.func = fcoe_rcv;
- fcoe->fcoe_packet_type.type = __constant_htons(ETH_P_FCOE);
- fcoe->fcoe_packet_type.dev = netdev;
- dev_add_pack(&fcoe->fcoe_packet_type);
-
- fcoe->fip_packet_type.func = fcoe_fip_recv;
- fcoe->fip_packet_type.type = htons(ETH_P_FIP);
- fcoe->fip_packet_type.dev = netdev;
- dev_add_pack(&fcoe->fip_packet_type);
-
return 0;
}
@@ -578,19 +617,22 @@ static void fcoe_if_destroy(struct fc_lport *lport)
/* Remove the instance from fcoe's list */
fcoe_hostlist_remove(lport);
- /* clean up netdev configurations */
- fcoe_netdev_cleanup(port);
+ /* Cleanup the fc_lport */
+ fc_lport_destroy(lport);
+ fc_fcp_destroy(lport);
+
+ /* Stop the transmit retry timer */
+ del_timer_sync(&port->timer);
- /* tear-down the FCoE controller */
- fcoe_ctlr_destroy(&fcoe->ctlr);
+ /* Free existing transmit skbs */
+ fcoe_clean_pending_queue(lport);
+
+ /* receives may not be stopped until after this */
+ fcoe_interface_put(fcoe);
/* Free queued packets for the per-CPU receive threads */
fcoe_percpu_clean(lport);
- /* Cleanup the fc_lport */
- fc_lport_destroy(lport);
- fc_fcp_destroy(lport);
-
/* Detach from the scsi-ml */
fc_remove_host(lport->host);
scsi_remove_host(lport->host);
@@ -598,19 +640,12 @@ static void fcoe_if_destroy(struct fc_lport *lport)
/* There are no more rports or I/O, free the EM */
fc_exch_mgr_free(lport);
- /* Free existing skbs */
- fcoe_clean_pending_queue(lport);
-
- /* Stop the timer */
- del_timer_sync(&port->timer);
-
/* Free memory used by statistical counters */
fc_lport_free_stats(lport);
/* Release the net_device and Scsi_Host */
dev_put(netdev);
scsi_host_put(lport->host);
- fcoe_interface_put(fcoe);
}
/*
@@ -660,8 +695,7 @@ static struct libfc_function_template fcoe_libfc_fcn_templ = {
* @fcoe: fcoe_interface structure to create an fc_lport instance on
* @parent: device pointer to be the parent in sysfs for the SCSI host
*
- * Creates fc_lport struct and scsi_host for lport, configures lport
- * and starts fabric login.
+ * Creates fc_lport struct and scsi_host for lport, configures lport.
*
* Returns : The allocated fc_lport or an error pointer
*/
@@ -695,19 +729,12 @@ static struct fc_lport *fcoe_if_create(struct fcoe_interface *fcoe,
goto out_host_put;
}
- /*
- * Initialize FIP.
- */
- fcoe_ctlr_init(&fcoe->ctlr);
- fcoe->ctlr.send = fcoe_fip_send;
- fcoe->ctlr.update_mac = fcoe_update_src_mac;
-
/* configure lport network properties */
rc = fcoe_netdev_config(lport, netdev);
if (rc) {
FCOE_NETDEV_DBG(netdev, "Could not configure netdev for the "
"interface\n");
- goto out_netdev_cleanup;
+ goto out_lp_destroy;
}
/* configure lport scsi host properties */
@@ -715,7 +742,7 @@ static struct fc_lport *fcoe_if_create(struct fcoe_interface *fcoe,
if (rc) {
FCOE_NETDEV_DBG(netdev, "Could not configure shost for the "
"interface\n");
- goto out_netdev_cleanup;
+ goto out_lp_destroy;
}
/* Initialize the library */
@@ -745,21 +772,12 @@ static struct fc_lport *fcoe_if_create(struct fcoe_interface *fcoe,
fcoe_hostlist_add(lport);
write_unlock(&fcoe_hostlist_lock);
- lport->boot_time = jiffies;
-
- fc_fabric_login(lport);
-
- if (!fcoe_link_ok(lport))
- fcoe_ctlr_link_up(&fcoe->ctlr);
-
dev_hold(netdev);
fcoe_interface_get(fcoe);
return lport;
out_lp_destroy:
fc_exch_mgr_free(lport);
-out_netdev_cleanup:
- fcoe_netdev_cleanup(port);
out_host_put:
scsi_host_put(lport->host);
out:
@@ -1731,10 +1749,21 @@ static int fcoe_create(const char *buffer, struct kernel_param *kp)
goto out_free;
}
- dev_put(netdev);
- return 0;
+ /* Make this the "master" N_Port */
+ fcoe->ctlr.lp = lport;
+
+ /* start FIP Discovery and FLOGI */
+ lport->boot_time = jiffies;
+ fc_fabric_login(lport);
+ if (!fcoe_link_ok(lport))
+ fcoe_ctlr_link_up(&fcoe->ctlr);
+ rc = 0;
out_free:
+ /*
+ * Release from init in fcoe_interface_create(), on success lport
+ * should be holding a reference taken in fcoe_if_create().
+ */
fcoe_interface_put(fcoe);
out_putdev:
dev_put(netdev);
next prev parent reply other threads:[~2009-08-25 21:00 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-25 20:58 [PATCH 00/64] libfc, libfcoe and fcoe updates for scsi-misc Robert Love
2009-08-25 20:58 ` [PATCH 01/64] fcoe: Add format spacing to FCOE_NETDEV_DBG debug macro Robert Love
2009-08-25 20:58 ` [PATCH 02/64] libfc: Fix misleading debug statement Robert Love
2009-08-25 20:58 ` [PATCH 03/64] fcoe: libfcoe: extra semicolon in CHECK_LOGGING macros causes compile error Robert Love
2009-08-25 20:58 ` [PATCH 04/64] fcoe, libfc: adds per cpu exch pool within exchange manager(EM) Robert Love
2009-08-25 20:58 ` [PATCH 05/64] fcoe, libfc: fully makes use of per cpu exch pool and then removes em_lock Robert Love
2009-08-25 20:58 ` [PATCH 06/64] libfc: Export FC headers Robert Love
2009-08-27 10:27 ` Christof Schmitt
2009-08-27 17:42 ` Robert Love
2009-08-28 8:32 ` Swen Schillig
2009-08-28 16:58 ` Robert Love
2009-08-25 20:59 ` [PATCH 07/64] fcoe: Add sysfs parameter to fcoe for minimum DDP read I/O size Robert Love
2009-08-25 20:59 ` [PATCH 08/64] libfcoe: fcoe_ctlr_destroy use cancel_work_sync instead of flush_work Robert Love
2009-08-25 20:59 ` [PATCH 09/64] fcoe: fix missing error check in call to fcoe_if_init Robert Love
2009-08-25 20:59 ` [PATCH 10/64] fcoe: remove unnecessary list and lock initializations Robert Love
2009-08-25 20:59 ` [PATCH 11/64] fcoe: interface changes to fcoe_if_create and fcoe_if_destroy Robert Love
2009-08-25 20:59 ` [PATCH 12/64] fcoe: Introduce and allocate fcoe_interface structure, 1:1 with net_device Robert Love
2009-08-25 20:59 ` [PATCH 13/64] fcoe: move netdev to fcoe_interface Robert Love
2009-08-25 20:59 ` [PATCH 14/64] fcoe: move packet handlers from fcoe_port " Robert Love
2009-08-25 20:59 ` [PATCH 15/64] fcoe: move FIP controller " Robert Love
2009-08-25 20:59 ` [PATCH 16/64] fcoe: move offload exchange manager pointer " Robert Love
2009-08-25 20:59 ` [PATCH 17/64] fcoe: remove fcoe_interface->priv pointer Robert Love
2009-08-25 21:00 ` [PATCH 18/64] fcoe: fcoe_interface create, destroy and refcounting Robert Love
2009-08-25 21:00 ` Robert Love [this message]
2009-08-25 21:00 ` [PATCH 20/64] fcoe: add mutex to protect create and destroy Robert Love
2009-08-25 21:00 ` [PATCH 21/64] fcoe: move the host-list add/remove to keep out VN_Ports Robert Love
2009-08-25 21:00 ` [PATCH 22/64] fcoe: Fix module ref count bug by adding NETDEV UNREGISTER handling Robert Love
2009-08-25 21:00 ` [PATCH 23/64] fcoe: use rtnl mutex in place of hostlist lock Robert Love
2009-08-25 21:00 ` [PATCH 24/64] libfc: prepare to split off struct fc_rport_priv from fc_rport_libfc_priv Robert Love
2009-08-25 21:00 ` [PATCH 25/64] libfc: change interface for rport_create Robert Love
2009-08-25 21:00 ` [PATCH 26/64] libfc: fix RPORT_TO_PRIV and PRIV_TO_RPORT() macros Robert Love
2009-08-25 21:00 ` [PATCH 27/64] libfc: make fc_rport_priv the primary rport interface Robert Love
2009-08-25 21:00 ` [PATCH 28/64] libfc: change elsct to use FC_ID instead of rdata Robert Love
2009-08-25 21:01 ` [PATCH 29/64] libfc: make rport structure optional Robert Love
2009-08-25 21:01 ` [PATCH 30/64] libfc: rearrange code in fc_rport_work Robert Love
2009-08-25 21:01 ` [PATCH 31/64] libfc: rename rport event CREATED to READY Robert Love
2009-08-25 21:01 ` [PATCH 32/64] libfc: don't create dummy (rogue) remote ports Robert Love
2009-08-25 21:01 ` [PATCH 33/64] libfc: fix rport event race between READY and LOGO Robert Love
2009-08-25 21:01 ` [PATCH 34/64] libfc: eliminate disc->event Robert Love
2009-08-25 21:01 ` [PATCH 35/64] libfc: remove unused disc->delay element Robert Love
2009-08-25 21:01 ` [PATCH 36/64] libfc: rport debug messages were printing pointer values Robert Love
2009-08-25 21:01 ` [PATCH 37/64] libfc: simplify fc_lport_rport_callback Robert Love
2009-08-25 21:01 ` [PATCH 38/64] libfc: make rport module maintain the rport list Robert Love
2009-08-25 21:01 ` [PATCH 39/64] libfc: have rport_create do a lookup for pre-existing rports first Robert Love
2009-08-25 21:02 ` [PATCH 40/64] libfc: change to make remote port callback optional Robert Love
2009-08-25 21:02 ` [PATCH 41/64] libfc: move rport_lookup into fc_rport.c Robert Love
2009-08-25 21:02 ` [PATCH 42/64] libfc: do not log off rports before or after discovery Robert Love
2009-08-25 21:02 ` [PATCH 43/64] libfc: discovery restart sequence error fix Robert Love
2009-08-25 21:02 ` [PATCH 44/64] libfc: rearrange code in fc_disc_gpn_ft_resp() Robert Love
2009-08-25 21:02 ` [PATCH 45/64] libfc: handle discovery failure more correctly Robert Love
2009-08-25 21:02 ` [PATCH 46/64] libfc: fix: empty zone causes endless discovery retries Robert Love
2009-08-25 21:02 ` [PATCH 47/64] libfc: discovery retry should clear pending first Robert Love
2009-08-25 21:02 ` [PATCH 48/64] libfc: discovery gpn_ft parse bug Robert Love
2009-08-25 21:02 ` [PATCH 49/64] libfc: clean up point-to-point discovery code Robert Love
2009-08-25 21:02 ` [PATCH 50/64] libfc: don't do discovery before callback is set Robert Love
2009-08-25 21:02 ` [PATCH 51/64] libfc: Initialize fc_rport_identifiers inside fc_rport_create Robert Love
2009-08-25 21:03 ` [PATCH 52/64] libfc: Always reset remote port roles when receiving PRLI Robert Love
2009-08-25 21:03 ` [PATCH 53/64] libfc: move remote port lookup for ELS requests into fc_rport.c Robert Love
2009-08-25 21:03 ` [PATCH 54/64] libfc: fix: rport_recv_req needs disc_mutex when calling rport_lookup Robert Love
2009-08-25 21:03 ` [PATCH 55/64] libfc: improve debug messages for ELS response handlers Robert Love
2009-08-25 21:03 ` [PATCH 56/64] libfc: correctly handle incoming PLOGI request Robert Love
2009-08-25 21:03 ` [PATCH 57/64] libfc: fix rport error handling for login-required and invalid ops Robert Love
2009-08-25 21:03 ` [PATCH 58/64] libfc: re-login to remote ports that send us LOGO Robert Love
2009-08-25 21:03 ` [PATCH 59/64] libfc: LOGO response code had extraeous enter_rtv Robert Love
2009-08-25 21:03 ` [PATCH 60/64] libfc: use ADISC to verify rport login state Robert Love
2009-08-25 21:03 ` [PATCH 61/64] libfc: fix handling of incoming Discover Address (ADISC) requests Robert Love
2009-08-25 21:03 ` [PATCH 62/64] libfc: send GPN_ID in reaction to single-port RSCNs Robert Love
2009-08-25 21:04 ` [PATCH 63/64] libfc: don't swap OX_ID and RX_ID when sending BA_RJT Robert Love
2009-08-25 21:04 ` [PATCH 64/64] fcoe: flush per-cpu thread work when destroying interface Robert Love
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090825210007.1553.54017.stgit@localhost.localdomain \
--to=robert.w.love@intel.com \
--cc=James.Bottomley@HansenPartnership.com \
--cc=christopher.leech@intel.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.