From: Volker Armin Hemmann <volkerarmin@googlemail.com>
To: Yinghai Lu <yhlu.kernel@gmail.com>, linux-kernel@vger.kernel.org
Subject: Re: amd64 + mtrr: only 3.1gb of 8gb are covered, kernel 2.6.30 and earlier.
Date: Thu, 27 Aug 2009 03:13:32 +0200 [thread overview]
Message-ID: <200908270313.32528.volkerarmin@googlemail.com> (raw)
In-Reply-To: <86802c440908222322s44957498s72a76940f89271cf@mail.gmail.com>
[-- Attachment #1: Type: Text/Plain, Size: 1364 bytes --]
Hi,
On Sonntag 23 August 2009, Yinghai Lu wrote:
> On Sat, Aug 22, 2009 at 12:26 PM, Volker Armin
>
> Hemmann<volkerarmin@googlemail.com> wrote:
> > when I went from 4gb to 6gb I had a performance degradation. Since the
> > 8gb are faster and the new cpu is faster, I don't see degradation. But I
> > wonder how much better performance could be with 'correct' mtrr.
>
> that is weird. with 4g should have mem hole remapping.
>
> do you still have /proc/mtrr for 6g setup?
>
> YH
some more information, mtrr of 8gb with my X2 6000:
reg00: base=0x000000000 ( 0MB), size= 2048MB, count=1: write-back
reg01: base=0x080000000 ( 2048MB), size= 1024MB, count=1: write-back
reg02: base=0x0c0000000 ( 3072MB), size= 128MB, count=1: write-back
reg03: base=0x0c8000000 ( 3200MB), size= 64MB, count=1: write-back
reg04: base=0x0cc000000 ( 3264MB), size= 32MB, count=1: write-back
reg05: base=0x0ce000000 ( 3296MB), size= 16MB, count=1: write-back
from June with 2.6.30, dmesg from that incident is attached
compared that with the mtrr with my X4:
reg00: base=0x000000000 ( 0MB), size= 2048MB, count=1: write-back
reg01: base=0x080000000 ( 2048MB), size= 1024MB, count=1: write-back
reg02: base=0x0c0000000 ( 3072MB), size= 128MB, count=1: write-back
just ignore the fgrlx parts - whenever I checked it did not made a difference
if X was started or not.
[-- Attachment #2: dmesg_8gb_x2_6000 --]
[-- Type: text/plain, Size: 64742 bytes --]
[ 0.000000] Linux version 2.6.30r4 (root@energy) (gcc version 4.4.0 (Gentoo 4.4.0 p1.0) ) #2 SMP Sat Jun 27 00:46:23 CEST 2009
[ 0.000000] Command line: root=/dev/md1 md=3,/dev/sda3,/dev/sdb3,/dev/sdc3 nmi_watchdog=0 amd_iommu_size=128M mtrr_spare_reg_nr=0
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000ceeb0000 (usable)
[ 0.000000] BIOS-e820: 00000000ceeb0000 - 00000000ceec0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000ceec0000 - 00000000ceef0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ceef0000 - 00000000cef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000231000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x231000 max_arch_pfn = 0x100000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFF8000000 write-back
[ 0.000000] 3 base 00C8000000 mask FFFC000000 write-back
[ 0.000000] 4 base 00CC000000 mask FFFE000000 write-back
[ 0.000000] 5 base 00CE000000 mask FFFF000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000231000000 aka 8976M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000cf000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xceeb0 max_arch_pfn = 0x100000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000ceeb0000
[ 0.000000] 0000000000 - 00cee00000 page 2M
[ 0.000000] 00cee00000 - 00ceeb0000 page 4k
[ 0.000000] kernel direct mapping tables up to ceeb0000 @ 10000-16000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000231000000
[ 0.000000] 0100000000 - 0231000000 page 2M
[ 0.000000] kernel direct mapping tables up to 231000000 @ 14000-1e000
[ 0.000000] ACPI: RSDP 00000000000fa7b0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000ceeb0000 00040 (v01 121508 RSDT1922 20081215 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000ceeb0200 00084 (v02 A_M_I OEMFACP 12000601 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000ceeb0440 08512 (v01 AS140 AS140115 00000115 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000ceec0000 00040
[ 0.000000] ACPI: APIC 00000000ceeb0390 0006C (v01 121508 APIC1922 20081215 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000ceeb0400 0003C (v01 121508 OEMMCFG 20081215 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000ceec0040 00071 (v01 121508 OEMB1922 20081215 MSFT 00000097)
[ 0.000000] ACPI: AAFT 00000000ceeb8960 00027 (v01 121508 OEMAAFT 20081215 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000ceeb8990 00038 (v01 121508 OEMHPET 20081215 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000ceeb89d0 0030E (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0231000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 000156ffbc] TEXT DATA BSS ==> [0001000000 - 000156ffbc]
[ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #4 [0001570000 - 0001570133] BRK ==> [0001570000 - 0001570133]
[ 0.000000] #5 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
[ 0.000000] #6 [0000014000 - 0000019000] PGTABLE ==> [0000014000 - 0000019000]
[ 0.000000] [ffffe20000000000-ffffe20007dfffff] PMD -> [ffff880028200000-ffff88002fffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00231000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000ceeb0
[ 0.000000] 0: 0x00100000 -> 0x00231000
[ 0.000000] On node 0 totalpages: 2096703
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 108 pages reserved
[ 0.000000] DMA zone: 3819 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 829160 pages, LIFO batch:31
[ 0.000000] Normal zone: 17080 pages used for memmap
[ 0.000000] Normal zone: 1232200 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] 4 Processors exceeds NR_CPUS limit of 2
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000ceeb0000 - 00000000ceec0000
[ 0.000000] PM: Registered nosave memory: 00000000ceec0000 - 00000000ceef0000
[ 0.000000] PM: Registered nosave memory: 00000000ceef0000 - 00000000cef00000
[ 0.000000] PM: Registered nosave memory: 00000000cef00000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: cef00000:31000000)
[ 0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 24 pages at ffff880028034000, static data 67744 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065179
[ 0.000000] Kernel command line: root=/dev/md1 md=3,/dev/sda3,/dev/sdb3,/dev/sdc3 nmi_watchdog=0 amd_iommu_size=128M mtrr_spare_reg_nr=0
[ 0.000000] md: Will configure md3 (super-block) from /dev/sda3,/dev/sdb3,/dev/sdc3, below.
[ 0.000000] Initializing CPU#0
[ 0.000000] NR_IRQS:320
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3000.107 MHz processor.
[ 0.003333] Console: colour VGA+ 80x25
[ 0.003333] console [tty0] enabled
[ 0.003333] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.003333] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003333] Checking aperture...
[ 0.003333] No AGP bridge found
[ 0.003333] Node 0: aperture @ e8c8000000 size 32 MB
[ 0.003333] Aperture beyond 4GB. Ignoring.
[ 0.003333] Your BIOS doesn't leave a aperture memory hole
[ 0.003333] Please enable the IOMMU option in the BIOS setup
[ 0.003333] This costs you 64 MB of RAM
[ 0.003333] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.003333] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.003333] Memory: 8172932k/9191424k available (3234k kernel code, 804612k absent, 212996k reserved, 1300k data, 348k init)
[ 0.003333] hpet clockevent registered
[ 0.003333] HPET: 4 timers in total, 1 timers will be used for per-cpu timer
[ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 6002.22 BogoMIPS (lpj=10000356)
[ 0.003480] Mount-cache hash table entries: 256
[ 0.003616] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.003669] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.003721] tseg: 0000000000
[ 0.003726] CPU: Physical Processor ID: 0
[ 0.003778] CPU: Processor Core ID: 0
[ 0.003835] using C1E aware idle routine
[ 0.003896] ACPI: Core revision 20090320
[ 0.011804] Setting APIC routing to flat
[ 0.012172] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.045231] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[ 0.046666] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.003333] Initializing CPU#1
[ 0.003333] Calibrating delay using timer specific routine.. 6002.12 BogoMIPS (lpj=10000202)
[ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.003333] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 1
[ 0.003333] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.136931] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[ 0.137414] Brought up 2 CPUs
[ 0.137466] Total of 2 processors activated (12005.34 BogoMIPS).
[ 0.137710] net_namespace: 608 bytes
[ 0.137824] xor: automatically using best checksumming function: generic_sse
[ 0.153334] generic_sse: 9249.600 MB/sec
[ 0.153386] xor: using function: generic_sse (9249.600 MB/sec)
[ 0.153459] Time: 14:03:02 Date: 06/28/09
[ 0.153533] NET: Registered protocol family 16
[ 0.153710] node 0 link 0: io port [1000, ffffff]
[ 0.153713] TOM: 00000000cf000000 aka 3312M
[ 0.153767] node 0 link 0: mmio [e0000000, efffffff]
[ 0.153769] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.153771] node 0 link 0: mmio [a0000, bffff]
[ 0.153773] node 0 link 0: mmio [cf000000, dfffffff]
[ 0.153774] TOM2: 0000000231000000 aka 8976M
[ 0.153827] bus: [00,07] on node 0 link 0
[ 0.153828] bus: 00 index 0 io port: [0, ffff]
[ 0.153830] bus: 00 index 1 mmio: [cf000000, ffffffff]
[ 0.153831] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.153833] bus: 00 index 3 mmio: [231000000, fcffffffff]
[ 0.153837] ACPI: bus type pci registered
[ 0.153949] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.154003] PCI: Not using MMCONFIG.
[ 0.154055] PCI: Using configuration type 1 for base access
[ 0.155427] bio: create slab <bio-0> at 0
[ 0.155885] ACPI: EC: Look up EC in DSDT
[ 0.163220] ACPI: Interpreter enabled
[ 0.163273] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.163424] ACPI: Using IOAPIC for interrupt routing
[ 0.163518] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.166738] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.174519] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.180654] ACPI: No dock devices found.
[ 0.180898] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.181006] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
[ 0.181062] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.181116] pci 0000:00:02.0: PME# disabled
[ 0.181207] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.181261] pci 0000:00:09.0: PME# disabled
[ 0.181345] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.181398] pci 0000:00:0a.0: PME# disabled
[ 0.181500] pci 0000:00:11.0: reg 10 io port: [0xa000-0xa007]
[ 0.181506] pci 0000:00:11.0: reg 14 io port: [0x9000-0x9003]
[ 0.181513] pci 0000:00:11.0: reg 18 io port: [0x8000-0x8007]
[ 0.181520] pci 0000:00:11.0: reg 1c io port: [0x7000-0x7003]
[ 0.181526] pci 0000:00:11.0: reg 20 io port: [0x6000-0x600f]
[ 0.181533] pci 0000:00:11.0: reg 24 32bit mmio: [0xfddff800-0xfddffbff]
[ 0.181587] pci 0000:00:12.0: reg 10 32bit mmio: [0xfddfe000-0xfddfefff]
[ 0.181643] pci 0000:00:12.1: reg 10 32bit mmio: [0xfddfd000-0xfddfdfff]
[ 0.181718] pci 0000:00:12.2: reg 10 32bit mmio: [0xfddff000-0xfddff0ff]
[ 0.181773] pci 0000:00:12.2: supports D1 D2
[ 0.181774] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.181829] pci 0000:00:12.2: PME# disabled
[ 0.181912] pci 0000:00:13.0: reg 10 32bit mmio: [0xfddfc000-0xfddfcfff]
[ 0.181969] pci 0000:00:13.1: reg 10 32bit mmio: [0xfddf7000-0xfddf7fff]
[ 0.182043] pci 0000:00:13.2: reg 10 32bit mmio: [0xfddf6800-0xfddf68ff]
[ 0.182097] pci 0000:00:13.2: supports D1 D2
[ 0.182099] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.182154] pci 0000:00:13.2: PME# disabled
[ 0.182326] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[ 0.182333] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[ 0.182340] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.182346] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.182353] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f]
[ 0.182491] pci 0000:00:14.5: reg 10 32bit mmio: [0xfddf5000-0xfddf5fff]
[ 0.182625] pci 0000:02:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.182633] pci 0000:02:00.0: reg 18 64bit mmio: [0xfdff0000-0xfdffffff]
[ 0.182639] pci 0000:02:00.0: reg 20 io port: [0xc000-0xc0ff]
[ 0.182647] pci 0000:02:00.0: reg 30 32bit mmio: [0xfdfc0000-0xfdfdffff]
[ 0.182665] pci 0000:02:00.0: supports D1 D2
[ 0.182698] pci 0000:02:00.1: reg 10 64bit mmio: [0xfdfec000-0xfdfeffff]
[ 0.182733] pci 0000:02:00.1: supports D1 D2
[ 0.182789] pci 0000:00:02.0: bridge io port: [0xc000-0xcfff]
[ 0.182792] pci 0000:00:02.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
[ 0.182795] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.182843] pci 0000:00:09.0: bridge io port: [0xd000-0xdfff]
[ 0.182845] pci 0000:00:09.0: bridge 32bit mmio: [0xfe000000-0xfeafffff]
[ 0.182849] pci 0000:00:09.0: bridge 64bit mmio pref: [0xfa000000-0xfcefffff]
[ 0.182885] pci 0000:01:00.0: reg 10 io port: [0xb800-0xb8ff]
[ 0.182900] pci 0000:01:00.0: reg 18 64bit mmio: [0xcffff000-0xcfffffff]
[ 0.182910] pci 0000:01:00.0: reg 20 64bit mmio: [0xcffe0000-0xcffeffff]
[ 0.182917] pci 0000:01:00.0: reg 30 32bit mmio: [0xfdef0000-0xfdefffff]
[ 0.182948] pci 0000:01:00.0: supports D1 D2
[ 0.182949] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.183004] pci 0000:01:00.0: PME# disabled
[ 0.183115] pci 0000:00:0a.0: bridge io port: [0xb000-0xbfff]
[ 0.183117] pci 0000:00:0a.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.183121] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xcff00000-0xcfffffff]
[ 0.183172] pci 0000:05:05.0: reg 10 io port: [0xe800-0xe8ff]
[ 0.183180] pci 0000:05:05.0: reg 14 32bit mmio: [0xfebffc00-0xfebffdff]
[ 0.183236] pci 0000:05:05.0: supports D1 D2
[ 0.183238] pci 0000:05:05.0: PME# supported from D1 D2 D3hot D3cold
[ 0.183294] pci 0000:05:05.0: PME# disabled
[ 0.183362] pci 0000:05:06.0: reg 10 32bit mmio: [0xfcfff000-0xfcffffff]
[ 0.183448] pci 0000:05:08.0: reg 10 io port: [0xe400-0xe43f]
[ 0.183509] pci 0000:05:08.0: supports D1 D2
[ 0.183555] pci 0000:00:14.4: transparent bridge
[ 0.183610] pci 0000:00:14.4: bridge io port: [0xe000-0xefff]
[ 0.183614] pci 0000:00:14.4: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[ 0.183618] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfcf00000-0xfcffffff]
[ 0.183632] pci_bus 0000:00: on NUMA node 0
[ 0.183637] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.183794] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.183841] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.183889] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.183960] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[ 0.187037] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
[ 0.187324] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
[ 0.187609] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[ 0.187894] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[ 0.188178] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 *11 12 14 15)
[ 0.188464] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 *10 11 12 14 15)
[ 0.188749] ACPI: PCI Interrupt Link [LNKG] (IRQs *4 10 11 12 14 15)
[ 0.189018] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 12 14 15)
[ 0.189432] SCSI subsystem initialized
[ 0.189525] libata version 3.00 loaded.
[ 0.189609] usbcore: registered new interface driver usbfs
[ 0.189688] usbcore: registered new interface driver hub
[ 0.189772] usbcore: registered new device driver usb
[ 0.243337] raid6: int64x1 2557 MB/s
[ 0.300018] raid6: int64x2 3408 MB/s
[ 0.356686] raid6: int64x4 2162 MB/s
[ 0.413358] raid6: int64x8 2341 MB/s
[ 0.470002] raid6: sse2x1 4312 MB/s
[ 0.526673] raid6: sse2x2 5658 MB/s
[ 0.583337] raid6: sse2x4 5812 MB/s
[ 0.583389] raid6: using algorithm sse2x4 (5812 MB/s)
[ 0.583464] PCI: Using ACPI for IRQ routing
[ 0.583523] pci 0000:00:00.0: BAR 3: can't allocate resource
[ 0.590192] PCI-DMA: Disabling AGP.
[ 0.590327] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.590380] PCI-DMA: using GART IOMMU.
[ 0.590438] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.590915] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0
[ 0.591054] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.593355] hpet: hpet2 irq 24 for MSI
[ 0.596684] Switched to high resolution mode on CPU 0
[ 0.596914] Switched to high resolution mode on CPU 1
[ 0.610016] pnp: PnP ACPI init
[ 0.610080] ACPI: bus type pnp registered
[ 0.612578] pnp 00:0b: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.612668] pnp 00:0b: mem resource (0xc0000-0xcffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.612757] pnp 00:0b: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.612846] pnp 00:0b: mem resource (0x100000-0xceefffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.613219] pnp: PnP ACPI: found 12 devices
[ 0.613272] ACPI: ACPI bus type pnp unregistered
[ 0.613347] system 00:06: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.613401] system 00:06: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.613457] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.613510] system 00:07: ioport range 0x40b-0x40b has been reserved
[ 0.613564] system 00:07: ioport range 0x4d6-0x4d6 has been reserved
[ 0.613618] system 00:07: ioport range 0xc00-0xc01 has been reserved
[ 0.613671] system 00:07: ioport range 0xc14-0xc14 has been reserved
[ 0.613725] system 00:07: ioport range 0xc50-0xc51 has been reserved
[ 0.613778] system 00:07: ioport range 0xc52-0xc52 has been reserved
[ 0.613831] system 00:07: ioport range 0xc6c-0xc6c has been reserved
[ 0.613885] system 00:07: ioport range 0xc6f-0xc6f has been reserved
[ 0.613938] system 00:07: ioport range 0xcd0-0xcd1 has been reserved
[ 0.613991] system 00:07: ioport range 0xcd2-0xcd3 has been reserved
[ 0.614044] system 00:07: ioport range 0xcd4-0xcd5 has been reserved
[ 0.614098] system 00:07: ioport range 0xcd6-0xcd7 has been reserved
[ 0.614151] system 00:07: ioport range 0xcd8-0xcdf has been reserved
[ 0.614209] system 00:07: ioport range 0x800-0x89f has been reserved
[ 0.614262] system 00:07: ioport range 0xb00-0xb0f has been reserved
[ 0.614315] system 00:07: ioport range 0xb20-0xb3f has been reserved
[ 0.614369] system 00:07: ioport range 0x900-0x90f has been reserved
[ 0.614422] system 00:07: ioport range 0x910-0x91f has been reserved
[ 0.614476] system 00:07: ioport range 0xfe00-0xfefe has been reserved
[ 0.614529] system 00:07: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.614583] system 00:07: iomem range 0xfec10000-0xfec1001f has been reserved
[ 0.614638] system 00:09: ioport range 0x290-0x29f has been reserved
[ 0.614693] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.614749] system 00:0b: iomem range 0xfec00000-0xffffffff could not be reserved
[ 0.619596] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
[ 0.619650] pci 0000:00:02.0: IO window: 0xc000-0xcfff
[ 0.619705] pci 0000:00:02.0: MEM window: 0xfdf00000-0xfdffffff
[ 0.619759] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.619848] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03
[ 0.619902] pci 0000:00:09.0: IO window: 0xd000-0xdfff
[ 0.619956] pci 0000:00:09.0: MEM window: 0xfe000000-0xfeafffff
[ 0.620023] pci 0000:00:09.0: PREFETCH window: 0x000000fa000000-0x000000fcefffff
[ 0.620112] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:01
[ 0.620165] pci 0000:00:0a.0: IO window: 0xb000-0xbfff
[ 0.620219] pci 0000:00:0a.0: MEM window: 0xfde00000-0xfdefffff
[ 0.620273] pci 0000:00:0a.0: PREFETCH window: 0x000000cff00000-0x000000cfffffff
[ 0.620363] pci 0000:00:14.4: PCI bridge, secondary bus 0000:05
[ 0.620417] pci 0000:00:14.4: IO window: 0xe000-0xefff
[ 0.620473] pci 0000:00:14.4: MEM window: 0xfeb00000-0xfebfffff
[ 0.620528] pci 0000:00:14.4: PREFETCH window: 0x000000fcf00000-0x000000fcffffff
[ 0.620626] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.620681] pci 0000:00:02.0: setting latency timer to 64
[ 0.620687] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.620741] pci 0000:00:09.0: setting latency timer to 64
[ 0.620745] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.620798] pci 0000:00:0a.0: setting latency timer to 64
[ 0.620806] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.620808] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.620810] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
[ 0.620812] pci_bus 0000:02: resource 1 mem: [0xfdf00000-0xfdffffff]
[ 0.620814] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.620816] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
[ 0.620817] pci_bus 0000:03: resource 1 mem: [0xfe000000-0xfeafffff]
[ 0.620819] pci_bus 0000:03: resource 2 pref mem [0xfa000000-0xfcefffff]
[ 0.620821] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
[ 0.620823] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.620825] pci_bus 0000:01: resource 2 pref mem [0xcff00000-0xcfffffff]
[ 0.620827] pci_bus 0000:05: resource 0 io: [0xe000-0xefff]
[ 0.620829] pci_bus 0000:05: resource 1 mem: [0xfeb00000-0xfebfffff]
[ 0.620830] pci_bus 0000:05: resource 2 pref mem [0xfcf00000-0xfcffffff]
[ 0.620832] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.620834] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.620861] NET: Registered protocol family 2
[ 0.656706] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.657789] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.659447] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.659987] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.660062] TCP reno registered
[ 0.670061] NET: Registered protocol family 1
[ 0.671306] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.671435] Loading Reiser4. See www.namesys.com for a description of Reiser4.
[ 0.671590] msgmni has been set to 15964
[ 0.671801] alg: No test for stdrng (krng)
[ 0.671856] async_tx: api initialized (sync-only)
[ 0.671941] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.672029] io scheduler noop registered
[ 0.672092] io scheduler cfq registered (default)
[ 0.800021] pci 0000:02:00.0: Boot video device
[ 0.800134] pcieport-driver 0000:00:02.0: irq 25 for MSI/MSI-X
[ 0.800143] pcieport-driver 0000:00:02.0: setting latency timer to 64
[ 0.800254] pcieport-driver 0000:00:09.0: irq 26 for MSI/MSI-X
[ 0.800262] pcieport-driver 0000:00:09.0: setting latency timer to 64
[ 0.800371] pcieport-driver 0000:00:0a.0: irq 27 for MSI/MSI-X
[ 0.800379] pcieport-driver 0000:00:0a.0: setting latency timer to 64
[ 0.800631] input: Power Button as /class/input/input0
[ 0.800684] ACPI: Power Button [PWRF]
[ 0.800793] input: Power Button as /class/input/input1
[ 0.800848] ACPI: Power Button [PWRB]
[ 0.801020] processor ACPI_CPU:00: registered as cooling_device0
[ 0.801074] ACPI: Processor [P001] (supports 8 throttling states)
[ 0.801200] processor ACPI_CPU:01: registered as cooling_device1
[ 0.805016] Linux agpgart interface v0.103
[ 0.805174] Driver 'sd' needs updating - please use bus_type methods
[ 0.805284] ahci 0000:00:11.0: version 3.0
[ 0.805298] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.805468] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.805557] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 0.806030] scsi0 : ahci
[ 0.806175] scsi1 : ahci
[ 0.806272] scsi2 : ahci
[ 0.806367] scsi3 : ahci
[ 0.806464] scsi4 : ahci
[ 0.806564] scsi5 : ahci
[ 0.806736] ata1: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddff900 irq 22
[ 0.806825] ata2: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddff980 irq 22
[ 0.806914] ata3: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffa00 irq 22
[ 0.807002] ata4: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffa80 irq 22
[ 0.807091] ata5: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffb00 irq 22
[ 0.807179] ata6: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffb80 irq 22
[ 0.807478] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.807535] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.808136] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.808243] mice: PS/2 mouse device common for all mice
[ 0.808393] rtc_cmos 00:02: RTC can wake from S4
[ 0.808481] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.808558] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.808630] md: raid1 personality registered for level 1
[ 0.808683] md: raid6 personality registered for level 6
[ 0.808735] md: raid5 personality registered for level 5
[ 0.808788] md: raid4 personality registered for level 4
[ 0.808909] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 0.809023] cpuidle: using governor ladder
[ 0.809169] usbcore: registered new interface driver hiddev
[ 0.809241] usbcore: registered new interface driver usbhid
[ 0.809295] usbhid: v2.6:USB HID core driver
[ 0.809375] TCP cubic registered
[ 0.809428] NET: Registered protocol family 17
[ 0.809493] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00)
[ 0.809622] powernow-k8: 0 : fid 0x16 (3000 MHz), vid 0x6
[ 0.809676] powernow-k8: 1 : fid 0x14 (2800 MHz), vid 0x8
[ 0.809729] powernow-k8: 2 : fid 0x12 (2600 MHz), vid 0xa
[ 0.809781] powernow-k8: 3 : fid 0x10 (2400 MHz), vid 0xc
[ 0.809834] powernow-k8: 4 : fid 0xe (2200 MHz), vid 0xe
[ 0.809887] powernow-k8: 5 : fid 0xc (2000 MHz), vid 0x10
[ 0.809939] powernow-k8: 6 : fid 0xa (1800 MHz), vid 0x10
[ 0.809992] powernow-k8: 7 : fid 0x2 (1000 MHz), vid 0x12
[ 0.810198] PM: Resume from disk failed.
[ 0.810303] Magic number: 13:102:82
[ 0.833832] input: AT Translated Set 2 keyboard as /class/input/input2
[ 1.126701] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.126781] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.126854] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.126931] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.127004] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.127078] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.133063] ata1.00: ATA-7: SAMSUNG HD502IJ, 1AA01109, max UDMA7
[ 1.133122] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.133185] ata4.00: ATA-7: SAMSUNG HD753LJ, 1AA01113, max UDMA7
[ 1.133246] ata4.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.133286] ata2.00: ATA-7: SAMSUNG HD502IJ, 1AA01110, max UDMA7
[ 1.133287] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.139554] ata1.00: configured for UDMA/133
[ 1.139682] ata2.00: configured for UDMA/133
[ 1.139811] ata4.00: configured for UDMA/133
[ 1.150914] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5
[ 1.151138] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 1.152079] sd 0:0:0:0: [sda] Write Protect is off
[ 1.152132] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.152143] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.152273] sda:<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.152430] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5
[ 1.152616] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 1.152709] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.152762] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.152771] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.152894] sdb:<5>sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.153036] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0 PQ: 0 ANSI: 5
[ 1.153217] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1.153291] sd 3:0:0:0: [sdc] 1465149168 512-byte hardware sectors: (750 GB/698 GiB)
[ 1.153399] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.153452] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.153462] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.153586] sdc: sdc1 sdc2 sdc3 sdc4 < sda1 sda2 sda3 sda4 < sdb1 sdb2 sdb3 sdb4 < sda5 sdc5 sdc6 sdb5 sda6 >
[ 1.178636] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.187480] sdc7 >
[ 1.187819] sdb6 >
[ 1.188149] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.188317] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.188377] md: Waiting for all devices to be available before autodetect
[ 1.188431] md: If you don't use raid, use raid=noautodetect
[ 1.188560] md: Autodetecting RAID arrays.
[ 1.303098] md: Scanned 12 and added 12 devices.
[ 1.303151] md: autorun ...
[ 1.303203] md: considering sdb6 ...
[ 1.303257] md: adding sdb6 ...
[ 1.303310] md: sdb5 has different UUID to sdb6
[ 1.303372] md: sdb3 has different UUID to sdb6
[ 1.303425] md: sdb1 has different UUID to sdb6
[ 1.303479] md: adding sdc6 ...
[ 1.303532] md: sdc5 has different UUID to sdb6
[ 1.303585] md: sdc3 has different UUID to sdb6
[ 1.303639] md: sdc1 has different UUID to sdb6
[ 1.303693] md: adding sda6 ...
[ 1.303745] md: sda5 has different UUID to sdb6
[ 1.303799] md: sda3 has different UUID to sdb6
[ 1.303852] md: sda1 has different UUID to sdb6
[ 1.303983] md: created md3
[ 1.304035] md: bind<sda6>
[ 1.304092] md: bind<sdc6>
[ 1.304148] md: bind<sdb6>
[ 1.304213] md: running: <sdb6><sdc6><sda6>
[ 1.304363] raid5: device sdb6 operational as raid disk 1
[ 1.304415] raid5: device sdc6 operational as raid disk 2
[ 1.304468] raid5: device sda6 operational as raid disk 0
[ 1.304715] raid5: allocated 3220kB for md3
[ 1.304778] raid5: raid level 5 set md3 active with 3 out of 3 devices, algorithm 2
[ 1.304866] RAID5 conf printout:
[ 1.304918] --- rd:3 wd:3
[ 1.304969] disk 0, o:1, dev:sda6
[ 1.305021] disk 1, o:1, dev:sdb6
[ 1.305073] disk 2, o:1, dev:sdc6
[ 1.305159] md: considering sdb5 ...
[ 1.305215] md: adding sdb5 ...
[ 1.305268] md: sdb3 has different UUID to sdb5
[ 1.305321] md: sdb1 has different UUID to sdb5
[ 1.305375] md: adding sdc5 ...
[ 1.305429] md: sdc3 has different UUID to sdb5
[ 1.305482] md: sdc1 has different UUID to sdb5
[ 1.305536] md: adding sda5 ...
[ 1.305589] md: sda3 has different UUID to sdb5
[ 1.305643] md: sda1 has different UUID to sdb5
[ 1.305758] md: created md2
[ 1.305810] md: bind<sda5>
[ 1.305866] md: bind<sdc5>
[ 1.305923] md: bind<sdb5>
[ 1.305980] md: running: <sdb5><sdc5><sda5>
[ 1.306123] raid5: device sdb5 operational as raid disk 1
[ 1.306175] raid5: device sdc5 operational as raid disk 2
[ 1.306228] raid5: device sda5 operational as raid disk 0
[ 1.306488] raid5: allocated 3220kB for md2
[ 1.306552] raid5: raid level 5 set md2 active with 3 out of 3 devices, algorithm 2
[ 1.306639] RAID5 conf printout:
[ 1.306698] --- rd:3 wd:3
[ 1.306750] disk 0, o:1, dev:sda5
[ 1.306802] disk 1, o:1, dev:sdb5
[ 1.306854] disk 2, o:1, dev:sdc5
[ 1.306937] md: considering sdb3 ...
[ 1.306993] md: adding sdb3 ...
[ 1.307046] md: sdb1 has different UUID to sdb3
[ 1.307101] md: adding sdc3 ...
[ 1.307154] md: sdc1 has different UUID to sdb3
[ 1.307208] md: adding sda3 ...
[ 1.307261] md: sda1 has different UUID to sdb3
[ 1.307369] md: created md1
[ 1.307422] md: bind<sda3>
[ 1.307478] md: bind<sdc3>
[ 1.307544] md: bind<sdb3>
[ 1.307600] md: running: <sdb3><sdc3><sda3>
[ 1.307742] raid5: device sdb3 operational as raid disk 1
[ 1.307795] raid5: device sdc3 operational as raid disk 2
[ 1.307848] raid5: device sda3 operational as raid disk 0
[ 1.308111] raid5: allocated 3220kB for md1
[ 1.308174] raid5: raid level 5 set md1 active with 3 out of 3 devices, algorithm 2
[ 1.308261] RAID5 conf printout:
[ 1.308313] --- rd:3 wd:3
[ 1.308365] disk 0, o:1, dev:sda3
[ 1.308417] disk 1, o:1, dev:sdb3
[ 1.308469] disk 2, o:1, dev:sdc3
[ 1.308552] md: considering sdb1 ...
[ 1.308607] md: adding sdb1 ...
[ 1.308661] md: adding sdc1 ...
[ 1.308714] md: adding sda1 ...
[ 1.308767] md: created md0
[ 1.308819] md: bind<sda1>
[ 1.308877] md: bind<sdc1>
[ 1.308934] md: bind<sdb1>
[ 1.308990] md: running: <sdb1><sdc1><sda1>
[ 1.309170] raid1: raid set md0 active with 3 out of 3 mirrors
[ 1.309252] md: ... autorun DONE.
[ 1.309330] md: Loading md3: /dev/sda3
[ 1.309391] md3: unknown partition table
[ 1.309585] md: couldn't update array info. -22
[ 1.309641] md: could not bd_claim sda3.
[ 1.309694] md: md_import_device returned -16
[ 1.309748] md: could not bd_claim sdb3.
[ 1.309800] md: md_import_device returned -16
[ 1.309854] md: could not bd_claim sdc3.
[ 1.309905] md: md_import_device returned -16
[ 1.309958] md: starting md3 failed
[ 1.310056] md1: unknown partition table
[ 1.356793] reiser4: md1: found disk format 4.0.0.
[ 5.390569] VFS: Mounted root (reiser4 filesystem) readonly on device 9:1.
[ 5.390642] Freeing unused kernel memory: 348k freed
[ 9.065384] udev: starting version 141
[ 9.065405] udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly
[ 9.382904] md0: unknown partition table
[ 9.388785] md2: unknown partition table
[ 10.684104] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 10.684120] r8169 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.684133] r8169 0000:01:00.0: setting latency timer to 64
[ 10.684506] r8169 0000:01:00.0: irq 28 for MSI/MSI-X
[ 10.684588] eth0: RTL8168c/8111c at 0xffffc20012e10000, 00:19:66:86:ce:12, XID 3c4000c0 IRQ 28
[ 10.715247] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 10.715273] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 10.715299] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 10.715833] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 10.715864] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[ 10.715882] ehci_hcd 0000:00:12.2: debug port 1
[ 10.715900] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfddff000
[ 10.724178] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 10.724212] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.724214] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.724216] usb usb1: Product: EHCI Host Controller
[ 10.724217] usb usb1: Manufacturer: Linux 2.6.30r4 ehci_hcd
[ 10.724219] usb usb1: SerialNumber: 0000:00:12.2
[ 10.724273] usb usb1: configuration #1 chosen from 1 choice
[ 10.724298] hub 1-0:1.0: USB hub found
[ 10.724307] hub 1-0:1.0: 6 ports detected
[ 10.724411] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 10.724431] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 10.724467] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 10.724488] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[ 10.724507] ehci_hcd 0000:00:13.2: debug port 1
[ 10.724522] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfddf6800
[ 10.734185] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 10.734209] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.734211] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.734213] usb usb2: Product: EHCI Host Controller
[ 10.734215] usb usb2: Manufacturer: Linux 2.6.30r4 ehci_hcd
[ 10.734216] usb usb2: SerialNumber: 0000:00:13.2
[ 10.734275] usb usb2: configuration #1 chosen from 1 choice
[ 10.734300] hub 2-0:1.0: USB hub found
[ 10.734308] hub 2-0:1.0: 6 ports detected
[ 10.778632] Linux video capture interface: v2.00
[ 10.789097] bttv: driver version 0.9.18 loaded
[ 10.789100] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 10.789129] bttv: Bt8xx card found (0).
[ 10.789141] bttv 0000:05:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 10.789152] bttv0: Bt848 (rev 18) at 0000:05:06.0, irq: 21, latency: 32, mmio: 0xfcfff000
[ 10.789776] bttv0: using: Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar [card=25,insmod option]
[ 10.789779] IRQ 21/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs
[ 10.789819] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
[ 11.030844] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 11.155884] usb 1-3: New USB device found, idVendor=05e3, idProduct=0608
[ 11.155885] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 11.155887] usb 1-3: Product: USB2.0 Hub
[ 11.155935] usb 1-3: configuration #1 chosen from 1 choice
[ 11.156149] hub 1-3:1.0: USB hub found
[ 11.156502] hub 1-3:1.0: 4 ports detected
[ 11.424864] usb 1-3.1: new low speed USB device using ehci_hcd and address 3
[ 11.514100] usb 1-3.1: New USB device found, idVendor=046d, idProduct=c518
[ 11.514102] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 11.514104] usb 1-3.1: Product: USB Receiver
[ 11.514105] usb 1-3.1: Manufacturer: Logitech
[ 11.514158] usb 1-3.1: configuration #1 chosen from 1 choice
[ 11.524577] input: Logitech USB Receiver as /class/input/input3
[ 11.524629] generic-usb 0003:046D:C518.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.2-3.1/input0
[ 11.530287] input: Logitech USB Receiver as /class/input/input4
[ 11.530354] generic-usb 0003:046D:C518.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-3.1/input1
[ 11.790024] bttv0: tea5757: read timeout
[ 11.790027] bttv0: tuner type=5
[ 11.808501] All bytes are equal. It is not a TEA5767
[ 11.808540] tuner 0-0060: chip found @ 0xc0 (bt848 #0 [sw])
[ 11.811730] tuner-simple 0-0060: creating new instance
[ 11.811733] tuner-simple 0-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
[ 11.825006] bttv0: audio absent, no audio device found!
[ 11.825049] bttv0: registered device video0
[ 11.825069] bttv0: registered device vbi0
[ 11.844462] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 11.844465] e100: Copyright(c) 1999-2006 Intel Corporation
[ 12.193039] reiser4: md2: found disk format 4.0.0.
[ 13.997414] reiser4: md3: found disk format 4.0.0.
[ 55.180844] reiser4: sdc7: found disk format 4.0.0.
[ 67.595571] Adding 7815612k swap on /dev/sda2. Priority:1 extents:1 across:7815612k
[ 67.606657] Adding 7815612k swap on /dev/sdb2. Priority:1 extents:1 across:7815612k
[ 67.617095] Adding 7815612k swap on /dev/sdc2. Priority:1 extents:1 across:7815612k
[ 68.400516] w83627ehf: Found W83627EHG chip at 0x290
[ 68.410870] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 68.814675] r8169: eth0: link up
[ 68.814682] r8169: eth0: link up
[ 69.000840] Clocksource tsc unstable (delta = -134183872 ns)
[ 71.440722] EMU10K1_Audigy 0000:05:08.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 71.448506] Audigy2 value: Special config.
[ 72.793961] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 72.793971] Disabling lock debugging due to kernel taint
[ 72.849012] [fglrx] Maximum main memory to use for locked dma buffers: 7749 MBytes.
[ 72.849222] [fglrx] vendor: 1002 device: 9501 count: 1
[ 72.849704] [fglrx] ioport: bar 4, base 0xc000, size: 0x100
[ 72.849728] pci 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 72.849738] pci 0000:02:00.0: setting latency timer to 64
[ 72.850071] [fglrx] Kernel PAT support is enabled
[ 72.850115] [fglrx] module loaded - fglrx 8.62.4 [May 20 2009] with 1 minors
[ 74.433201] fglrx_pci 0000:02:00.0: irq 29 for MSI/MSI-X
[ 74.433535] [fglrx] Firegl kernel thread PID: 3915
[ 74.448363] [fglrx] Gart USWC size:1279 M.
[ 74.448366] [fglrx] Gart cacheable size:508 M.
[ 74.448371] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 74.448373] [fglrx] Reserved FB block: Unshared offset:fbff000, size:401000
[ 74.448375] [fglrx] Reserved FB block: Unshared offset:1fffc000, size:4000
[ 74.457643] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fae1f0000,handle:0xd0000000
[ 74.515927] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fad83f000,handle:0xd10a0000
[ 74.532065] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e96000,handle:0xd11a0000
[ 74.532114] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb11a5000,handle:0xd11a4000
[ 74.751708] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e95000,handle:0xd11a8000
[ 74.751730] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e94000,handle:0xd11a9000
[ 74.984297] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fac307000,handle:0xfdff0000
[ 74.984492] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fac2c7000,handle:0xd11aa000
[ 74.988311] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fac2c7000,handle:0xd11aa000
[ 75.004646] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fac23c000,handle:0xfdff0000
[ 75.550286] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fac23c000,handle:0xfdff0000
[ 75.550325] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fac307000,handle:0xfdff0000
[ 75.550447] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fad83f000,handle:0xd10a0000
[ 75.551925] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fae1f0000,handle:0xd0000000
[ 75.552052] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb11a5000,handle:0xd11a4000
[ 75.552114] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e94000,handle:0xd11a9000
[ 75.552125] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e95000,handle:0xd11a8000
[ 75.552137] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e96000,handle:0xd11a0000
[ 75.553632] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fac23c000,handle:0xfdff0000
[ 75.553640] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fac307000,handle:0xfdff0000
[ 75.553647] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fad83f000,handle:0xd10a0000
[ 75.553654] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fae1f0000,handle:0xd0000000
[ 75.553666] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb11a5000,handle:0xd11a4000
[ 75.553676] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e94000,handle:0xd11a9000
[ 75.553682] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e95000,handle:0xd11a8000
[ 75.553688] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e96000,handle:0xd11a0000
[ 75.858023] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fac23c000,handle:0xfdff0000
[ 75.858096] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fac307000,handle:0xfdff0000
[ 75.858303] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fad83f000,handle:0xd10a0000
[ 75.860375] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fae1f0000,handle:0xd0000000
[ 75.860589] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb11a5000,handle:0xd11a4000
[ 75.860703] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e94000,handle:0xd11a9000
[ 75.860726] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e95000,handle:0xd11a8000
[ 75.860745] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e96000,handle:0xd11a0000
[ 75.863454] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fac23c000,handle:0xfdff0000
[ 75.863469] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fac307000,handle:0xfdff0000
[ 75.863481] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fad83f000,handle:0xd10a0000
[ 75.863494] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fae1f0000,handle:0xd0000000
[ 75.863519] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb11a5000,handle:0xd11a4000
[ 75.863537] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e94000,handle:0xd11a9000
[ 75.863547] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e95000,handle:0xd11a8000
[ 75.863558] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e96000,handle:0xd11a0000
[ 75.968577] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fac23c000,handle:0xfdff0000
[ 75.968604] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fac307000,handle:0xfdff0000
[ 75.968680] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fad83f000,handle:0xd10a0000
[ 75.969422] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fae1f0000,handle:0xd0000000
[ 75.969507] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb11a5000,handle:0xd11a4000
[ 75.969550] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e94000,handle:0xd11a9000
[ 75.969556] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e95000,handle:0xd11a8000
[ 75.969563] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e96000,handle:0xd11a0000
[ 75.970505] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fac23c000,handle:0xfdff0000
[ 75.970509] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fac307000,handle:0xfdff0000
[ 75.970513] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fad83f000,handle:0xd10a0000
[ 75.970517] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fae1f0000,handle:0xd0000000
[ 75.970525] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb11a5000,handle:0xd11a4000
[ 75.970531] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e94000,handle:0xd11a9000
[ 75.970535] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e95000,handle:0xd11a8000
[ 75.970538] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e96000,handle:0xd11a0000
[ 99.004408] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7faafc7000,handle:0xd11ab000
[ 99.005315] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7faa8da000,handle:0xd13ab000
[ 99.009092] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7faa8da000,handle:0xd13ab000
[ 99.344445] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7faa8da000,handle:0xd1a97000
[ 99.346962] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7faa8da000,handle:0xd1a97000
[ 99.780075] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7faafc7000,handle:0xd11ab000
[ 310.130543] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f3461ce2000,handle:0xfdff0000
[ 310.132172] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f346198a000,handle:0xd11ac000
[ 310.135805] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f346198a000,handle:0xd11ac000
[ 310.301717] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f345f68a000,handle:0xd125c000
[ 310.529123] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f345f208000,handle:0xd145c000
[ 330.643213] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f345c7d9000,handle:0xd165c000
[ 330.644786] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f345c7d9000,handle:0xd165c000
[ 331.072608] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f345d159000,handle:0xd1a5c000
[ 334.394209] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f345b744000,handle:0xd1c64000
[ 334.394933] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f345b744000,handle:0xd1c64000
[ 344.444794] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f345bb83000,handle:0xd1e6c000
[ 344.446393] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f345b744000,handle:0xd21a4000
[ 549.610432] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f345f68a000,handle:0xd125c000
[ 549.610497] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f345d159000,handle:0xd1a5c000
[ 549.610561] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f345bb83000,handle:0xd1e6c000
[ 549.610625] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f345b744000,handle:0xd21a4000
[ 549.610688] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f345f208000,handle:0xd145c000
[ 549.671659] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f3461ce2000,handle:0xfdff0000
[ 564.981893] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f9010a04000,handle:0xfdff0000
[ 564.983515] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f9010163000,handle:0xd11ac000
[ 564.987387] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f9010163000,handle:0xd11ac000
[ 565.401879] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f900ee9b000,handle:0xd125c000
[ 588.766362] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f9000327000,handle:0xd14b9000
[ 591.568345] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f8ffdb0b000,handle:0xd16b9000
[ 592.314446] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f8ffd39e000,handle:0xd18b9000
[ 592.813976] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f8ffcc23000,handle:0xd1ab9000
[ 612.575160] reiser4[zsh(5703)]: disable_write_barrier (fs/reiser4/wander.c:235)[zam-1055]:
[ 612.575161] NOTICE: md1 does not support write barriers, using synchronous write instead.
[ 671.429039] reiser4[qmgr(3749)]: disable_write_barrier (fs/reiser4/wander.c:235)[zam-1055]:
[ 671.429040] NOTICE: md2 does not support write barriers, using synchronous write instead.
[ 684.136908] reiser4[ktxnmgrd:md3:ru(2825)]: disable_write_barrier (fs/reiser4/wander.c:235)[zam-1055]:
[ 684.136909] NOTICE: md3 does not support write barriers, using synchronous write instead.
[ 827.910880] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f900dddf000,handle:0xd1cb9000
[ 855.901749] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f8ffc0cb000,handle:0xd1eb9000
[ 855.902475] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f8ffc0cb000,handle:0xd1eb9000
[ 855.903785] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f900d644000,handle:0xd21a4000
[ 855.904505] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f900d644000,handle:0xd21a4000
[ 855.905475] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f8ffbae1000,handle:0xd23a4000
[ 855.906966] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f8ffbae1000,handle:0xd23a4000
[ 855.908185] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f900d644000,handle:0xd27a4000
[ 855.908927] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f900d644000,handle:0xd27a4000
[ 966.615713] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f8ffb35d000,handle:0xd29a4000
[ 966.616497] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f8ffb35d000,handle:0xd29a4000
[ 1056.227655] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f8ffc8a1000,handle:0xd2ba4000
[ 1056.228390] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f8ffc8a1000,handle:0xd2ba4000
[ 1076.675435] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f900ee9b000,handle:0xd125c000
[ 1076.675503] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f8ffcc23000,handle:0xd1ab9000
[ 1076.675565] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f9000327000,handle:0xd14b9000
[ 1076.675629] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f8ffdb0b000,handle:0xd16b9000
[ 1076.675692] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f900dddf000,handle:0xd1cb9000
[ 1076.675781] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f8ffd39e000,handle:0xd18b9000
[ 1076.734879] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f9010a04000,handle:0xfdff0000
[-- Attachment #3: dmesg_8gb_x4_955 --]
[-- Type: text/plain, Size: 45620 bytes --]
[ 0.000000] Linux version 2.6.30.5r4 (root@energy) (gcc version 4.4.1 (Gentoo 4.4.1 p1.0) ) #1 SMP Tue Aug 18 06:28:18 CEST 2009
[ 0.000000] Command line: root=/dev/md1 md=3,/dev/sda3,/dev/sdb3,/dev/sdc3 nmi_watchdog=0 mtrr_spare_reg_nr=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000c7eb0000 (usable)
[ 0.000000] BIOS-e820: 00000000c7eb0000 - 00000000c7ec0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000c7ec0000 - 00000000c7ef0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000c7ef0000 - 00000000c7f00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000238000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x238000 max_arch_pfn = 0x100000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF8000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000238000000 aka 9088M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000c8000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xc7eb0 max_arch_pfn = 0x100000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000c7eb0000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00c7e00000 page 2M
[ 0.000000] 00c7e00000 - 00c7eb0000 page 4k
[ 0.000000] kernel direct mapping tables up to c7eb0000 @ 10000-13000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000238000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] 0100000000 - 0200000000 page 1G
[ 0.000000] 0200000000 - 0238000000 page 2M
[ 0.000000] kernel direct mapping tables up to 238000000 @ 12000-14000
[ 0.000000] ACPI: RSDP 00000000000fa7c0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000c7eb0000 00040 (v01 050609 RSDT2000 20090506 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000c7eb0200 00084 (v02 A M I OEMFACP 12000601 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000c7eb0440 08512 (v01 AS140 AS140121 00000121 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000c7ec0000 00040
[ 0.000000] ACPI: APIC 00000000c7eb0390 0006C (v01 050609 APIC2000 20090506 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000c7eb0400 0003C (v01 050609 OEMMCFG 20090506 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000c7ec0040 00071 (v01 050609 OEMB2000 20090506 MSFT 00000097)
[ 0.000000] ACPI: AAFT 00000000c7eb8960 00027 (v01 050609 OEMAAFT 20090506 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000c7eb8990 00038 (v01 050609 OEMHPET 20090506 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000c7eb89d0 0088C (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0238000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001575998] TEXT DATA BSS ==> [0001000000 - 0001575998]
[ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #4 [0001576000 - 0001576133] BRK ==> [0001576000 - 0001576133]
[ 0.000000] #5 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #6 [0000012000 - 0000013000] PGTABLE ==> [0000012000 - 0000013000]
[ 0.000000] [ffffe20000000000-ffffe20007dfffff] PMD -> [ffff880028200000-ffff88002fffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00238000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000c7eb0
[ 0.000000] 0: 0x00100000 -> 0x00238000
[ 0.000000] On node 0 totalpages: 2096703
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 102 pages reserved
[ 0.000000] DMA zone: 3825 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 800488 pages, LIFO batch:31
[ 0.000000] Normal zone: 17472 pages used for memmap
[ 0.000000] Normal zone: 1260480 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000c7eb0000 - 00000000c7ec0000
[ 0.000000] PM: Registered nosave memory: 00000000c7ec0000 - 00000000c7ef0000
[ 0.000000] PM: Registered nosave memory: 00000000c7ef0000 - 00000000c7f00000
[ 0.000000] PM: Registered nosave memory: 00000000c7f00000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c8000000 (gap: c7f00000:38000000)
[ 0.000000] NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 24 pages at ffff880028034000, static data 67808 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064793
[ 0.000000] Kernel command line: root=/dev/md1 md=3,/dev/sda3,/dev/sdb3,/dev/sdc3 nmi_watchdog=0 mtrr_spare_reg_nr=1
[ 0.000000] md: Will configure md3 (super-block) from /dev/sda3,/dev/sdb3,/dev/sdc3, below.
[ 0.000000] Initializing CPU#0
[ 0.000000] NR_IRQS:384
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3199.396 MHz processor.
[ 0.003333] Console: colour VGA+ 80x25
[ 0.003333] console [tty0] enabled
[ 0.003333] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.003333] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003333] Checking aperture...
[ 0.003333] No AGP bridge found
[ 0.003333] Node 0: aperture @ 20000000 size 32 MB
[ 0.003333] Aperture pointing to e820 RAM. Ignoring.
[ 0.003333] Your BIOS doesn't leave a aperture memory hole
[ 0.003333] Please enable the IOMMU option in the BIOS setup
[ 0.003333] This costs you 64 MB of RAM
[ 0.003333] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.003333] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.003333] Memory: 8172700k/9306112k available (3231k kernel code, 919300k absent, 213188k reserved, 1310k data, 348k init)
[ 0.003333] hpet clockevent registered
[ 0.003333] HPET: 4 timers in total, 1 timers will be used for per-cpu timer
[ 0.003339] Calibrating delay loop (skipped), value calculated using timer frequency.. 6401.40 BogoMIPS (lpj=10664640)
[ 0.003445] Mount-cache hash table entries: 256
[ 0.003565] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.003600] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003635] tseg: 0000000000
[ 0.003640] CPU: Physical Processor ID: 0
[ 0.003673] CPU: Processor Core ID: 0
[ 0.003712] using C1E aware idle routine
[ 0.003755] ACPI: Core revision 20090320
[ 0.016702] Setting APIC routing to flat
[ 0.017042] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.050834] CPU0: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.053332] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.003333] Initializing CPU#1
[ 0.003333] Calibrating delay using timer specific routine.. 6402.85 BogoMIPS (lpj=10666975)
[ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.003333] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 1
[ 0.003333] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.144186] CPU1: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.144501] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.146716] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.003333] Initializing CPU#2
[ 0.003333] Calibrating delay using timer specific routine.. 6402.85 BogoMIPS (lpj=10666969)
[ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.003333] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 2
[ 0.003333] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
[ 0.240889] CPU2: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.241204] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.243382] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.003333] Initializing CPU#3
[ 0.003333] Calibrating delay using timer specific routine.. 6402.86 BogoMIPS (lpj=10666976)
[ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.003333] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 3
[ 0.003333] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
[ 0.337491] CPU3: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.337806] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.340014] Brought up 4 CPUs
[ 0.340048] Total of 4 processors activated (25609.97 BogoMIPS).
[ 0.340318] net_namespace: 1400 bytes
[ 0.340422] xor: automatically using best checksumming function: generic_sse
[ 0.356667] generic_sse: 12784.800 MB/sec
[ 0.356701] xor: using function: generic_sse (12784.800 MB/sec)
[ 0.356755] Time: 1:11:08 Date: 08/27/09
[ 0.356837] NET: Registered protocol family 16
[ 0.357045] node 0 link 0: io port [1000, ffffff]
[ 0.357048] TOM: 00000000c8000000 aka 3200M
[ 0.357082] Fam 10h mmconf [e0000000, efffffff]
[ 0.357084] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.357086] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.357088] node 0 link 0: mmio [a0000, bffff]
[ 0.357089] node 0 link 0: mmio [c8000000, dfffffff]
[ 0.357091] TOM2: 0000000238000000 aka 9088M
[ 0.357125] bus: [00,07] on node 0 link 0
[ 0.357126] bus: 00 index 0 io port: [0, ffff]
[ 0.357127] bus: 00 index 1 mmio: [f0000000, ffffffff]
[ 0.357128] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.357129] bus: 00 index 3 mmio: [c8000000, dfffffff]
[ 0.357131] bus: 00 index 4 mmio: [238000000, fcffffffff]
[ 0.357137] ACPI: bus type pci registered
[ 0.357241] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.357277] PCI: Not using MMCONFIG.
[ 0.357310] PCI: Using configuration type 1 for base access
[ 0.357345] PCI: Using configuration type 1 for extended access
[ 0.358938] bio: create slab <bio-0> at 0
[ 0.359389] ACPI: EC: Look up EC in DSDT
[ 0.367199] ACPI: Interpreter enabled
[ 0.367234] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.367351] ACPI: Using IOAPIC for interrupt routing
[ 0.367429] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.370599] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.375781] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.381489] ACPI: No dock devices found.
[ 0.381718] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.381799] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
[ 0.381845] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.381880] pci 0000:00:02.0: PME# disabled
[ 0.381948] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.381983] pci 0000:00:09.0: PME# disabled
[ 0.382532] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.382567] pci 0000:00:0a.0: PME# disabled
[ 0.382645] pci 0000:00:11.0: reg 10 io port: [0x9000-0x9007]
[ 0.382651] pci 0000:00:11.0: reg 14 io port: [0x8000-0x8003]
[ 0.382657] pci 0000:00:11.0: reg 18 io port: [0x7000-0x7007]
[ 0.382663] pci 0000:00:11.0: reg 1c io port: [0x6000-0x6003]
[ 0.382668] pci 0000:00:11.0: reg 20 io port: [0x5000-0x500f]
[ 0.382674] pci 0000:00:11.0: reg 24 32bit mmio: [0xfddff800-0xfddffbff]
[ 0.382724] pci 0000:00:12.0: reg 10 32bit mmio: [0xfddfe000-0xfddfefff]
[ 0.382775] pci 0000:00:12.1: reg 10 32bit mmio: [0xfddfd000-0xfddfdfff]
[ 0.382843] pci 0000:00:12.2: reg 10 32bit mmio: [0xfddff000-0xfddff0ff]
[ 0.382892] pci 0000:00:12.2: supports D1 D2
[ 0.382894] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.382930] pci 0000:00:12.2: PME# disabled
[ 0.382992] pci 0000:00:13.0: reg 10 32bit mmio: [0xfddfc000-0xfddfcfff]
[ 0.383043] pci 0000:00:13.1: reg 10 32bit mmio: [0xfddf7000-0xfddf7fff]
[ 0.383111] pci 0000:00:13.2: reg 10 32bit mmio: [0xfddf6800-0xfddf68ff]
[ 0.383161] pci 0000:00:13.2: supports D1 D2
[ 0.383162] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.383199] pci 0000:00:13.2: PME# disabled
[ 0.383342] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[ 0.383348] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[ 0.383353] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.383359] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.383365] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f]
[ 0.383490] pci 0000:00:14.5: reg 10 32bit mmio: [0xfddf5000-0xfddf5fff]
[ 0.383624] pci 0000:02:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.383631] pci 0000:02:00.0: reg 18 64bit mmio: [0xfdff0000-0xfdffffff]
[ 0.383636] pci 0000:02:00.0: reg 20 io port: [0xb000-0xb0ff]
[ 0.383643] pci 0000:02:00.0: reg 30 32bit mmio: [0xfdfc0000-0xfdfdffff]
[ 0.383659] pci 0000:02:00.0: supports D1 D2
[ 0.383686] pci 0000:02:00.1: reg 10 64bit mmio: [0xfdfec000-0xfdfeffff]
[ 0.383717] pci 0000:02:00.1: supports D1 D2
[ 0.383767] pci 0000:00:02.0: bridge io port: [0xb000-0xbfff]
[ 0.383769] pci 0000:00:02.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
[ 0.383772] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.383812] pci 0000:03:00.0: reg 10 io port: [0xd800-0xd8ff]
[ 0.383828] pci 0000:03:00.0: reg 18 64bit mmio: [0xfebff000-0xfebfffff]
[ 0.383844] pci 0000:03:00.0: reg 30 32bit mmio: [0xfebc0000-0xfebdffff]
[ 0.383878] pci 0000:03:00.0: supports D1 D2
[ 0.383879] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.383916] pci 0000:03:00.0: PME# disabled
[ 0.383999] pci 0000:00:09.0: bridge io port: [0xc000-0xdfff]
[ 0.384001] pci 0000:00:09.0: bridge 32bit mmio: [0xfe000000-0xfebfffff]
[ 0.384003] pci 0000:00:09.0: bridge 64bit mmio pref: [0xfa000000-0xfcefffff]
[ 0.384035] pci 0000:01:00.0: reg 10 io port: [0xa800-0xa8ff]
[ 0.384049] pci 0000:01:00.0: reg 18 64bit mmio: [0xcffff000-0xcfffffff]
[ 0.384059] pci 0000:01:00.0: reg 20 64bit mmio: [0xcffe0000-0xcffeffff]
[ 0.384065] pci 0000:01:00.0: reg 30 32bit mmio: [0xfdef0000-0xfdefffff]
[ 0.384094] pci 0000:01:00.0: supports D1 D2
[ 0.384095] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.384132] pci 0000:01:00.0: PME# disabled
[ 0.384219] pci 0000:00:0a.0: bridge io port: [0xa000-0xafff]
[ 0.384221] pci 0000:00:0a.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.384223] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xcff00000-0xcfffffff]
[ 0.384258] pci 0000:05:06.0: reg 10 32bit mmio: [0xfcfff000-0xfcffffff]
[ 0.384338] pci 0000:05:08.0: reg 10 io port: [0xe800-0xe83f]
[ 0.384395] pci 0000:05:08.0: supports D1 D2
[ 0.384437] pci 0000:00:14.4: transparent bridge
[ 0.384474] pci 0000:00:14.4: bridge io port: [0xe000-0xefff]
[ 0.384480] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfcf00000-0xfcffffff]
[ 0.384492] pci_bus 0000:00: on NUMA node 0
[ 0.384496] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.384625] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.384670] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.384715] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.384777] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[ 0.387594] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
[ 0.387840] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
[ 0.388083] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[ 0.388326] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[ 0.388568] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.388857] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 12 14 15)
[ 0.389100] ACPI: PCI Interrupt Link [LNKG] (IRQs *4 10 11 12 14 15)
[ 0.389329] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 12 14 15)
[ 0.389715] SCSI subsystem initialized
[ 0.389800] libata version 3.00 loaded.
[ 0.389869] usbcore: registered new interface driver usbfs
[ 0.389925] usbcore: registered new interface driver hub
[ 0.389988] usbcore: registered new device driver usb
[ 0.446681] raid6: int64x1 2808 MB/s
[ 0.503341] raid6: int64x2 3611 MB/s
[ 0.560017] raid6: int64x4 2846 MB/s
[ 0.616667] raid6: int64x8 2701 MB/s
[ 0.673348] raid6: sse2x1 4157 MB/s
[ 0.730004] raid6: sse2x2 7091 MB/s
[ 0.786669] raid6: sse2x4 7848 MB/s
[ 0.786702] raid6: using algorithm sse2x4 (7848 MB/s)
[ 0.786786] PCI: Using ACPI for IRQ routing
[ 0.786825] pci 0000:00:00.0: BAR 3: can't allocate resource
[ 0.800198] PCI-DMA: Disabling AGP.
[ 0.800313] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.800347] PCI-DMA: using GART IOMMU.
[ 0.800382] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.802129] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0
[ 0.802238] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.806695] hpet: hpet2 irq 24 for MSI
[ 0.813350] Switched to high resolution mode on CPU 0
[ 0.814492] Switched to high resolution mode on CPU 3
[ 0.814519] Switched to high resolution mode on CPU 1
[ 0.814556] Switched to high resolution mode on CPU 2
[ 0.826700] pnp: PnP ACPI init
[ 0.826753] ACPI: bus type pnp registered
[ 0.829222] pnp 00:0b: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.829277] pnp 00:0b: mem resource (0xc0000-0xcffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.829332] pnp 00:0b: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.829387] pnp 00:0b: mem resource (0x100000-0xc7efffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.829741] pnp: PnP ACPI: found 12 devices
[ 0.829775] ACPI: ACPI bus type pnp unregistered
[ 0.829816] system 00:06: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.829869] system 00:06: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.829907] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.829942] system 00:07: ioport range 0x40b-0x40b has been reserved
[ 0.829977] system 00:07: ioport range 0x4d6-0x4d6 has been reserved
[ 0.830018] system 00:07: ioport range 0xc00-0xc01 has been reserved
[ 0.830053] system 00:07: ioport range 0xc14-0xc14 has been reserved
[ 0.830088] system 00:07: ioport range 0xc50-0xc51 has been reserved
[ 0.830123] system 00:07: ioport range 0xc52-0xc52 has been reserved
[ 0.830158] system 00:07: ioport range 0xc6c-0xc6c has been reserved
[ 0.830192] system 00:07: ioport range 0xc6f-0xc6f has been reserved
[ 0.830227] system 00:07: ioport range 0xcd0-0xcd1 has been reserved
[ 0.830262] system 00:07: ioport range 0xcd2-0xcd3 has been reserved
[ 0.830297] system 00:07: ioport range 0xcd4-0xcd5 has been reserved
[ 0.830331] system 00:07: ioport range 0xcd6-0xcd7 has been reserved
[ 0.830366] system 00:07: ioport range 0xcd8-0xcdf has been reserved
[ 0.830401] system 00:07: ioport range 0x800-0x89f has been reserved
[ 0.830436] system 00:07: ioport range 0xb00-0xb0f has been reserved
[ 0.830471] system 00:07: ioport range 0xb20-0xb3f has been reserved
[ 0.830505] system 00:07: ioport range 0x900-0x90f has been reserved
[ 0.830540] system 00:07: ioport range 0x910-0x91f has been reserved
[ 0.830575] system 00:07: ioport range 0xfe00-0xfefe has been reserved
[ 0.830610] system 00:07: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.830645] system 00:07: iomem range 0xfec10000-0xfec1001f has been reserved
[ 0.830682] system 00:09: ioport range 0x290-0x29f has been reserved
[ 0.830718] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.830755] system 00:0b: iomem range 0xfec00000-0xffffffff could not be reserved
[ 0.835661] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
[ 0.835696] pci 0000:00:02.0: IO window: 0xb000-0xbfff
[ 0.835732] pci 0000:00:02.0: MEM window: 0xfdf00000-0xfdffffff
[ 0.835768] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.835823] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03
[ 0.835857] pci 0000:00:09.0: IO window: 0xc000-0xdfff
[ 0.835893] pci 0000:00:09.0: MEM window: 0xfe000000-0xfebfffff
[ 0.835928] pci 0000:00:09.0: PREFETCH window: 0x000000fa000000-0x000000fcefffff
[ 0.835982] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:01
[ 0.836017] pci 0000:00:0a.0: IO window: 0xa000-0xafff
[ 0.836052] pci 0000:00:0a.0: MEM window: 0xfde00000-0xfdefffff
[ 0.836088] pci 0000:00:0a.0: PREFETCH window: 0x000000cff00000-0x000000cfffffff
[ 0.836142] pci 0000:00:14.4: PCI bridge, secondary bus 0000:05
[ 0.836178] pci 0000:00:14.4: IO window: 0xe000-0xefff
[ 0.836215] pci 0000:00:14.4: MEM window: disabled
[ 0.836251] pci 0000:00:14.4: PREFETCH window: 0x000000fcf00000-0x000000fcffffff
[ 0.836315] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.836351] pci 0000:00:02.0: setting latency timer to 64
[ 0.836357] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.836392] pci 0000:00:09.0: setting latency timer to 64
[ 0.836396] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.836431] pci 0000:00:0a.0: setting latency timer to 64
[ 0.836438] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.836439] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.836441] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff]
[ 0.836442] pci_bus 0000:02: resource 1 mem: [0xfdf00000-0xfdffffff]
[ 0.836444] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.836445] pci_bus 0000:03: resource 0 io: [0xc000-0xdfff]
[ 0.836447] pci_bus 0000:03: resource 1 mem: [0xfe000000-0xfebfffff]
[ 0.836448] pci_bus 0000:03: resource 2 pref mem [0xfa000000-0xfcefffff]
[ 0.836449] pci_bus 0000:01: resource 0 io: [0xa000-0xafff]
[ 0.836451] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.836452] pci_bus 0000:01: resource 2 pref mem [0xcff00000-0xcfffffff]
[ 0.836454] pci_bus 0000:05: resource 0 io: [0xe000-0xefff]
[ 0.836455] pci_bus 0000:05: resource 2 pref mem [0xfcf00000-0xfcffffff]
[ 0.836456] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.836457] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.836508] NET: Registered protocol family 2
[ 0.873408] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.873922] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.874916] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.875314] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.875350] TCP reno registered
[ 0.883431] NET: Registered protocol family 1
[ 0.885125] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.885268] Loading Reiser4. See www.namesys.com for a description of Reiser4.
[ 0.885408] msgmni has been set to 15964
[ 0.885675] alg: No test for stdrng (krng)
[ 0.885715] async_tx: api initialized (sync-only)
[ 0.885794] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.885848] io scheduler noop registered
[ 0.885892] io scheduler cfq registered (default)
[ 0.886016] pci 0000:02:00.0: Boot video device
[ 0.886115] pcieport-driver 0000:00:02.0: irq 25 for MSI/MSI-X
[ 0.886122] pcieport-driver 0000:00:02.0: setting latency timer to 64
[ 0.886214] pcieport-driver 0000:00:09.0: irq 26 for MSI/MSI-X
[ 0.886220] pcieport-driver 0000:00:09.0: setting latency timer to 64
[ 0.886308] pcieport-driver 0000:00:0a.0: irq 27 for MSI/MSI-X
[ 0.886315] pcieport-driver 0000:00:0a.0: setting latency timer to 64
[ 0.886532] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.886585] ACPI: Power Button [PWRF]
[ 0.886677] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.886730] ACPI: Power Button [PWRB]
[ 0.886873] processor ACPI_CPU:00: registered as cooling_device0
[ 0.886908] ACPI: Processor [P001] (supports 8 throttling states)
[ 0.887004] processor ACPI_CPU:01: registered as cooling_device1
[ 0.887074] processor ACPI_CPU:02: registered as cooling_device2
[ 0.887145] processor ACPI_CPU:03: registered as cooling_device3
[ 0.890974] Linux agpgart interface v0.103
[ 0.891098] Driver 'sd' needs updating - please use bus_type methods
[ 0.891182] ahci 0000:00:11.0: version 3.0
[ 0.891194] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.891338] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.891392] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 0.891907] scsi0 : ahci
[ 0.892044] scsi1 : ahci
[ 0.892134] scsi2 : ahci
[ 0.892222] scsi3 : ahci
[ 0.892313] scsi4 : ahci
[ 0.892400] scsi5 : ahci
[ 0.892527] ata1: SATA max UDMA/133 irq_stat 0x00400000 irq 22, PHY RDY changed
[ 0.892582] ata2: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddff980 irq 22
[ 0.892636] ata3: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffa00 irq 22
[ 0.892691] ata4: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffa80 irq 22
[ 0.892745] ata5: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffb00 irq 22
[ 0.892799] ata6: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffb80 irq 22
[ 0.893030] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.893067] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.893532] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.893598] mice: PS/2 mouse device common for all mice
[ 0.893731] rtc_cmos 00:02: RTC can wake from S4
[ 0.893805] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.893861] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.893914] md: raid1 personality registered for level 1
[ 0.893948] md: raid6 personality registered for level 6
[ 0.893983] md: raid5 personality registered for level 5
[ 0.894017] md: raid4 personality registered for level 4
[ 0.894124] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 0.894217] cpuidle: using governor ladder
[ 0.894335] usbcore: registered new interface driver hiddev
[ 0.894389] usbcore: registered new interface driver usbhid
[ 0.894424] usbhid: v2.6:USB HID core driver
[ 0.894497] TCP cubic registered
[ 0.894531] NET: Registered protocol family 17
[ 0.894592] powernow-k8: Found 1 AMD Phenom(tm) II X4 955 Processor processors (4 cpu cores) (version 2.20.00)
[ 0.895174] powernow-k8: 0 : pstate 0 (3200 MHz)
[ 0.895210] powernow-k8: 1 : pstate 1 (2500 MHz)
[ 0.895244] powernow-k8: 2 : pstate 2 (2100 MHz)
[ 0.895278] powernow-k8: 3 : pstate 3 (800 MHz)
[ 0.895659] PM: Resume from disk failed.
[ 0.895752] Magic number: 5:759:155
[ 0.895802] acpi device:22: hash matches
[ 0.918908] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.210866] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.210927] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.210985] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.211037] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.211091] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.217280] ata4.00: ATA-7: SAMSUNG HD753LJ, 1AA01113, max UDMA7
[ 1.217321] ata4.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.217367] ata2.00: ATA-7: SAMSUNG HD502IJ, 1AA01110, max UDMA7
[ 1.217402] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.223776] ata4.00: configured for UDMA/133
[ 1.223829] ata2.00: configured for UDMA/133
[ 1.610867] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.617221] ata1.00: ATA-7: SAMSUNG HD502IJ, 1AA01109, max UDMA7
[ 1.617257] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.623677] ata1.00: configured for UDMA/133
[ 1.637999] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5
[ 1.638214] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.638266] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 1.638333] sd 0:0:0:0: [sda] Write Protect is off
[ 1.638350] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5
[ 1.638421] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.638433] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.638475] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 1.638482] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.638484] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.638486] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.638493] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.638536] sdb:<5>scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0 PQ: 0 ANSI: 5
[ 1.638695] sd 3:0:0:0: [sdc] 1465149168 512-byte hardware sectors: (750 GB/698 GiB)
[ 1.638702] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.638704] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.638712] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.638755] sdc:<5>sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1.638933] sda: sda1 sda2 sda3 sda4 < sdc1 sdc2 sdc3 sdc4 < sdb1 sdb2 sdb3 sdb4 < sda5 sdc5 sda6 >
[ 1.660539] sdb5<5>sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.661819] sdc6 sdb6 >
[ 1.672095] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.675012] sdc7 >
[ 1.675339] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.675382] md: Waiting for all devices to be available before autodetect
[ 1.675416] md: If you don't use raid, use raid=noautodetect
[ 1.675516] md: Autodetecting RAID arrays.
[ 1.773512] md: Scanned 12 and added 12 devices.
[ 1.773547] md: autorun ...
[ 1.773581] md: considering sdc6 ...
[ 1.773620] md: adding sdc6 ...
[ 1.773654] md: sdc5 has different UUID to sdc6
[ 1.773688] md: sdc3 has different UUID to sdc6
[ 1.773723] md: sdc1 has different UUID to sdc6
[ 1.773758] md: adding sdb6 ...
[ 1.773792] md: sdb5 has different UUID to sdc6
[ 1.773826] md: sdb3 has different UUID to sdc6
[ 1.773861] md: sdb1 has different UUID to sdc6
[ 1.773896] md: adding sda6 ...
[ 1.773930] md: sda5 has different UUID to sdc6
[ 1.773965] md: sda3 has different UUID to sdc6
[ 1.773999] md: sda1 has different UUID to sdc6
[ 1.774117] md: created md3
[ 1.774151] md: bind<sda6>
[ 1.774188] md: bind<sdb6>
[ 1.774225] md: bind<sdc6>
[ 1.774261] md: running: <sdc6><sdb6><sda6>
[ 1.774392] raid5: device sdc6 operational as raid disk 2
[ 1.774426] raid5: device sdb6 operational as raid disk 1
[ 1.774460] raid5: device sda6 operational as raid disk 0
[ 1.774655] raid5: allocated 3220kB for md3
[ 1.774703] raid5: raid level 5 set md3 active with 3 out of 3 devices, algorithm 2
[ 1.774756] RAID5 conf printout:
[ 1.774789] --- rd:3 wd:3
[ 1.774823] disk 0, o:1, dev:sda6
[ 1.774856] disk 1, o:1, dev:sdb6
[ 1.774890] disk 2, o:1, dev:sdc6
[ 1.774953] md: considering sdc5 ...
[ 1.774989] md: adding sdc5 ...
[ 1.775023] md: sdc3 has different UUID to sdc5
[ 1.775058] md: sdc1 has different UUID to sdc5
[ 1.775093] md: adding sdb5 ...
[ 1.775127] md: sdb3 has different UUID to sdc5
[ 1.775162] md: sdb1 has different UUID to sdc5
[ 1.775197] md: adding sda5 ...
[ 1.775231] md: sda3 has different UUID to sdc5
[ 1.775265] md: sda1 has different UUID to sdc5
[ 1.775356] md: created md2
[ 1.775389] md: bind<sda5>
[ 1.775426] md: bind<sdb5>
[ 1.775463] md: bind<sdc5>
[ 1.775499] md: running: <sdc5><sdb5><sda5>
[ 1.775629] raid5: device sdc5 operational as raid disk 2
[ 1.775663] raid5: device sdb5 operational as raid disk 1
[ 1.775697] raid5: device sda5 operational as raid disk 0
[ 1.775886] raid5: allocated 3220kB for md2
[ 1.775932] raid5: raid level 5 set md2 active with 3 out of 3 devices, algorithm 2
[ 1.775985] RAID5 conf printout:
[ 1.776018] --- rd:3 wd:3
[ 1.776051] disk 0, o:1, dev:sda5
[ 1.776084] disk 1, o:1, dev:sdb5
[ 1.776118] disk 2, o:1, dev:sdc5
[ 1.776180] md: considering sdc3 ...
[ 1.776216] md: adding sdc3 ...
[ 1.776250] md: sdc1 has different UUID to sdc3
[ 1.776285] md: adding sdb3 ...
[ 1.776319] md: sdb1 has different UUID to sdc3
[ 1.776354] md: adding sda3 ...
[ 1.776388] md: sda1 has different UUID to sdc3
[ 1.776480] md: created md1
[ 1.776513] md: bind<sda3>
[ 1.776551] md: bind<sdb3>
[ 1.776588] md: bind<sdc3>
[ 1.776624] md: running: <sdc3><sdb3><sda3>
[ 1.776755] raid5: device sdc3 operational as raid disk 2
[ 1.776790] raid5: device sdb3 operational as raid disk 1
[ 1.776824] raid5: device sda3 operational as raid disk 0
[ 1.777017] raid5: allocated 3220kB for md1
[ 1.777064] raid5: raid level 5 set md1 active with 3 out of 3 devices, algorithm 2
[ 1.777116] RAID5 conf printout:
[ 1.777150] --- rd:3 wd:3
[ 1.777183] disk 0, o:1, dev:sda3
[ 1.777216] disk 1, o:1, dev:sdb3
[ 1.777250] disk 2, o:1, dev:sdc3
[ 1.777313] md: considering sdc1 ...
[ 1.777351] md: adding sdc1 ...
[ 1.777386] md: adding sdb1 ...
[ 1.777421] md: adding sda1 ...
[ 1.777454] md: created md0
[ 1.777487] md: bind<sda1>
[ 1.777524] md: bind<sdb1>
[ 1.777560] md: bind<sdc1>
[ 1.777597] md: running: <sdc1><sdb1><sda1>
[ 1.777755] raid1: raid set md0 active with 3 out of 3 mirrors
[ 1.777816] md: ... autorun DONE.
[ 1.777867] md: Loading md3: /dev/sda3
[ 1.777906] md3: unknown partition table
[ 1.778067] md: couldn't update array info. -22
[ 1.778104] md: could not bd_claim sda3.
[ 1.778138] md: md_import_device returned -16
[ 1.778174] md: could not bd_claim sdb3.
[ 1.778207] md: md_import_device returned -16
[ 1.778243] md: could not bd_claim sdc3.
[ 1.778276] md: md_import_device returned -16
[ 1.778311] md: starting md3 failed
[ 1.778386] md1: unknown partition table
[ 1.815947] reiser4: md1: found disk format 4.0.0.
[ 5.835444] VFS: Mounted root (reiser4 filesystem) readonly on device 9:1.
[ 5.835495] Freeing unused kernel memory: 348k freed
[ 8.831192] udev: starting version 145
[ 8.956611] md0:<6> md2: unknown partition table
[ 8.992687] unknown partition table
[ 9.615011] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 9.615028] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 9.615042] r8169 0000:03:00.0: setting latency timer to 64
[ 9.615310] r8169 0000:03:00.0: irq 28 for MSI/MSI-X
[ 9.615384] eth0: RTL8168b/8111b at 0xffffc20012dec000, 00:e0:45:46:00:29, XID 38000000 IRQ 28
[ 9.616772] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 9.616780] r8169 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 9.616788] r8169 0000:01:00.0: setting latency timer to 64
[ 9.616840] r8169 0000:01:00.0: irq 29 for MSI/MSI-X
[ 9.616887] eth1: RTL8168c/8111c at 0xffffc2000006a000, 00:19:66:86:ce:12, XID 3c4000c0 IRQ 29
[ 9.620294] udev: renamed network interface eth1 to eth0
[ 9.641911] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 9.641933] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 9.641970] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 9.642198] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 9.642222] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[ 9.642238] ehci_hcd 0000:00:12.2: debug port 1
[ 9.642255] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfddff000
[ 9.651263] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 9.651288] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 9.651290] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.651291] usb usb1: Product: EHCI Host Controller
[ 9.651292] usb usb1: Manufacturer: Linux 2.6.30.5r4 ehci_hcd
[ 9.651293] usb usb1: SerialNumber: 0000:00:12.2
[ 9.651638] usb usb1: configuration #1 chosen from 1 choice
[ 9.651679] hub 1-0:1.0: USB hub found
[ 9.651685] hub 1-0:1.0: 6 ports detected
[ 9.651813] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 9.651834] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 9.651994] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 9.652012] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[ 9.652028] ehci_hcd 0000:00:13.2: debug port 1
[ 9.652041] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfddf6800
[ 9.661263] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 9.661274] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 9.661275] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.661276] usb usb2: Product: EHCI Host Controller
[ 9.661277] usb usb2: Manufacturer: Linux 2.6.30.5r4 ehci_hcd
[ 9.661278] usb usb2: SerialNumber: 0000:00:13.2
[ 9.661346] usb usb2: configuration #1 chosen from 1 choice
[ 9.661374] hub 2-0:1.0: USB hub found
[ 9.661378] hub 2-0:1.0: 6 ports detected
[ 9.670316] udev: renamed network interface _rename to eth1
[ 9.691307] Linux video capture interface: v2.00
[ 9.699465] bttv: driver version 0.9.18 loaded
[ 9.699467] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 9.699515] bttv: Bt8xx card found (0).
[ 9.699527] bttv 0000:05:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 9.699537] bttv0: Bt848 (rev 18) at 0000:05:06.0, irq: 21, latency: 128, mmio: 0xfcfff000
[ 9.699567] bttv0: using: Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar [card=25,insmod option]
[ 9.699569] IRQ 21/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs
[ 9.699603] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
[ 9.957103] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 10.082077] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
[ 10.082079] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 10.082081] usb 1-2: Product: USB2.0 Hub
[ 10.082130] usb 1-2: configuration #1 chosen from 1 choice
[ 10.082560] hub 1-2:1.0: USB hub found
[ 10.082825] hub 1-2:1.0: 4 ports detected
[ 10.351118] usb 1-2.2: new low speed USB device using ehci_hcd and address 3
[ 10.440497] usb 1-2.2: New USB device found, idVendor=046d, idProduct=c518
[ 10.440499] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 10.440501] usb 1-2.2: Product: USB Receiver
[ 10.440502] usb 1-2.2: Manufacturer: Logitech
[ 10.440535] usb 1-2.2: configuration #1 chosen from 1 choice
[ 10.450750] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.0/input/input3
[ 10.450789] generic-usb 0003:046D:C518.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.2-2.2/input0
[ 10.455931] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.1/input/input4
[ 10.455981] generic-usb 0003:046D:C518.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-2.2/input1
[ 10.700030] bttv0: tea5757: read timeout
[ 10.700032] bttv0: tuner type=5
[ 10.711868] All bytes are equal. It is not a TEA5767
[ 10.711899] tuner 0-0060: chip found @ 0xc0 (bt848 #0 [sw])
[ 10.714766] tuner-simple 0-0060: creating new instance
[ 10.714768] tuner-simple 0-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
[ 10.727127] bttv0: audio absent, no audio device found!
[ 10.727193] bttv0: registered device video0
[ 10.727219] bttv0: registered device vbi0
[ 11.006704] reiser4: md2: found disk format 4.0.0.
[ 12.788508] reiser4: md3: found disk format 4.0.0.
[ 54.187328] reiser4: sdc7: found disk format 4.0.0.
[ 66.507842] Adding 7815612k swap on /dev/sda2. Priority:1 extents:1 across:7815612k
[ 66.514717] Adding 7815612k swap on /dev/sdb2. Priority:1 extents:1 across:7815612k
[ 66.584800] Adding 7815612k swap on /dev/sdc2. Priority:1 extents:1 across:7815612k
[ 67.187645] w83627ehf: Found W83627EHG chip at 0x290
[ 67.569061] r8169: eth0: link up
[ 67.569070] r8169: eth0: link up
[ 67.573771] r8169: eth1: link down
[ 70.343374] EMU10K1_Audigy 0000:05:08.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 70.350367] Audigy2 value: Special config.
[ 71.704750] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 71.704759] Disabling lock debugging due to kernel taint
[ 71.752696] [fglrx] Maximum main memory to use for locked dma buffers: 7749 MBytes.
[ 71.752961] [fglrx] vendor: 1002 device: 9501 count: 1
[ 71.753615] [fglrx] ioport: bar 4, base 0xb000, size: 0x100
[ 71.753637] pci 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 71.753646] pci 0000:02:00.0: setting latency timer to 64
[ 71.754126] [fglrx] Kernel PAT support is enabled
[ 71.754163] [fglrx] module loaded - fglrx 8.66.2 [Aug 25 2009] with 1 minors
[ 71.953696] fglrx_pci 0000:02:00.0: irq 30 for MSI/MSI-X
[ 71.954048] [fglrx] Firegl kernel thread PID: 3883
[ 74.083532] [fglrx] Gart USWC size:1279 M.
[ 74.083534] [fglrx] Gart cacheable size:508 M.
[ 74.083538] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 74.083540] [fglrx] Reserved FB block: Unshared offset:fbff000, size:401000
[ 74.083541] [fglrx] Reserved FB block: Unshared offset:1fffc000, size:4000
[ 611.862435] reiser4[ktxnmgrd:md1:ru(537)]: disable_write_barrier (fs/reiser4/wander.c:235)[zam-1055]:
[ 611.862436] NOTICE: md1 does not support write barriers, using synchronous write instead.
[ 670.057754] reiser4[pickup(3743)]: disable_write_barrier (fs/reiser4/wander.c:235)[zam-1055]:
[ 670.057755] NOTICE: md2 does not support write barriers, using synchronous write instead.
[ 692.937317] reiser4[ktxnmgrd:md3:ru(2705)]: disable_write_barrier (fs/reiser4/wander.c:235)[zam-1055]:
[ 692.937318] NOTICE: md3 does not support write barriers, using synchronous write instead.
[ 6000.574616] usb 1-2.2: reset low speed USB device using ehci_hcd and address 3
next prev parent reply other threads:[~2009-08-27 1:13 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-21 16:14 amd64 + mtrr: only 3.1gb of 8gb are covered, kernel 2.6.30 and earlier Volker Armin Hemmann
2009-08-22 5:43 ` Robert Hancock
2009-08-22 18:48 ` Yinghai Lu
2009-08-22 18:54 ` Volker Armin Hemmann
2009-08-22 19:04 ` Yinghai Lu
[not found] ` <200908222126.31390.volkerarmin@googlemail.com>
[not found] ` <86802c440908222322s44957498s72a76940f89271cf@mail.gmail.com>
2009-08-23 9:11 ` Volker Armin Hemmann
2009-08-27 1:13 ` Volker Armin Hemmann [this message]
2009-08-27 7:13 ` Yinghai Lu
2009-08-27 16:28 ` Volker Armin Hemmann
2009-09-19 20:11 ` Volker Armin Hemmann
2009-09-20 6:03 ` Yinghai Lu
2009-09-29 17:32 ` Volker Armin Hemmann
2009-09-29 19:23 ` Yinghai Lu
2009-09-29 19:24 ` Volker Armin Hemmann
-- strict thread matches above, loose matches on Subject: below --
2009-08-22 19:29 Volker Armin Hemmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200908270313.32528.volkerarmin@googlemail.com \
--to=volkerarmin@googlemail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=yhlu.kernel@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.