Re: MTX build failure

[Florian Fainelli <florian@openwrt.org>]

Le Friday 28 August 2009 11:26:58 Manuel Lauss, vous avez écrit :
> I wrote:
> > Ralf Baechle wrote:
> >>   CC      drivers/input/keyboard/gpio_keys.o
> >> /home/ralf/src/linux/linux-mips/drivers/input/keyboard/gpio_keys.c: In
> >> function ‘gpio_keys_probe’:
> >> /home/ralf/src/linux/linux-mips/drivers/input/keyboard/gpio_keys.c:123:
> >> error: implicit declaration of function ‘gpio_request’
> >> /home/ralf/src/linux/linux-mips/drivers/input/keyboard/gpio_keys.c:135:
> >> error: implicit declaration of function ‘gpio_free’ make[5]: ***
> >> [drivers/input/keyboard/gpio_keys.o] Error 1
> >> make[4]: *** [drivers/input/keyboard] Error 2
> >> make[3]: *** [drivers/input] Error 2
> >> make[2]: *** [drivers] Error 2
> >> make[1]: *** [sub-make] Error 2
> >
> > Either something like the patch below, or adding stubs for
> > gpio_request/gpio_free to asm/mach-au1x00/gpio-au1000.h in the
> > CONFIG_GPIOLIB=n case should fix it.
>
> Florian, Ralf, I prefer the latter approach;  saves everyone from
> having to add #ifdef CONFIG_GPIOLIB around gpio_request() calls.
>
> Here's an untested patch.  What do you think?  If it works for you, please
> add it to your patchqueue!
>
> Thanks!
>
> ---
>
> From: Manuel Lauss <manuel.lauss@gmail.com>
> Subject: [PATCH] Alchemy: add gpio_request/gpio_free stubs for
> CONFIG_GPIOLIB=n
>
> Some drivers use gpio_request/gpio_free regardless of whether
> gpiolib is actually built;  add stubs to work around the ensuing
> compile failures.

This is better, though fixing the gpio keyboard driver might probably be a good approach.

>
> Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>

Tested-by: Florian Fainelli <florian@openwrt.org>

> ---
>  arch/mips/include/asm/mach-au1x00/gpio-au1000.h |    9 +++++++++
>  1 files changed, 9 insertions(+), 0 deletions(-)
>
> diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
> b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h index 127d4ed..feea001
> 100644
> --- a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
> +++ b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
> @@ -578,6 +578,15 @@ static inline int irq_to_gpio(int irq)
>  	return alchemy_irq_to_gpio(irq);
>  }
>
> +static inline int gpio_request(unsigned gpio, const char *label)
> +{
> +	return 0;
> +}
> +
> +static inline void gpio_free(unsigned gpio)
> +{
> +}
> +
>  #endif	/* !CONFIG_ALCHEMY_GPIO_INDIRECT */
>
>
> --
> 1.6.4.1
-- 
Best regards, Florian Fainelli
Email: florian@openwrt.org
Web: http://openwrt.org
IRC: [florian] on irc.freenode.net
-------------------------------