From: Stephen Hemminger <shemminger@vyatta.com>
To: David Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org,
Grant Grundler <grundler@parisc-linux.org>,
Kyle McMartin <kyle@mcmartin.ca>
Subject: [PATCH 14/19] tulip: convert drivers to netdev_tx_t
Date: Mon, 31 Aug 2009 22:50:53 -0700 [thread overview]
Message-ID: <20090901055129.814907029@vyatta.com> (raw)
In-Reply-To: 20090901055039.824876937@vyatta.com
[-- Attachment #1: tulip.patch --]
[-- Type: text/plain, Size: 7149 bytes --]
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
---
drivers/net/tulip/de2104x.c | 3 ++-
drivers/net/tulip/de4x5.c | 11 +++++------
drivers/net/tulip/dmfe.c | 5 +++--
drivers/net/tulip/tulip_core.c | 5 +++--
drivers/net/tulip/uli526x.c | 6 ++++--
drivers/net/tulip/winbond-840.c | 4 ++--
drivers/net/tulip/xircom_cb.c | 6 ++++--
7 files changed, 23 insertions(+), 17 deletions(-)
--- a/drivers/net/tulip/de2104x.c 2009-08-29 23:10:19.609527457 -0700
+++ b/drivers/net/tulip/de2104x.c 2009-08-29 23:12:54.117527675 -0700
@@ -599,7 +599,8 @@ next:
netif_wake_queue(de->dev);
}
-static int de_start_xmit (struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t de_start_xmit (struct sk_buff *skb,
+ struct net_device *dev)
{
struct de_private *de = netdev_priv(dev);
unsigned int entry, tx_free;
--- a/drivers/net/tulip/de4x5.c 2009-08-29 23:10:19.553491700 -0700
+++ b/drivers/net/tulip/de4x5.c 2009-08-29 23:12:54.125526807 -0700
@@ -895,7 +895,8 @@ static struct {
** Public Functions
*/
static int de4x5_open(struct net_device *dev);
-static int de4x5_queue_pkt(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t de4x5_queue_pkt(struct sk_buff *skb,
+ struct net_device *dev);
static irqreturn_t de4x5_interrupt(int irq, void *dev_id);
static int de4x5_close(struct net_device *dev);
static struct net_device_stats *de4x5_get_stats(struct net_device *dev);
@@ -1456,18 +1457,16 @@ de4x5_sw_reset(struct net_device *dev)
/*
** Writes a socket buffer address to the next available transmit descriptor.
*/
-static int
+static netdev_tx_t
de4x5_queue_pkt(struct sk_buff *skb, struct net_device *dev)
{
struct de4x5_private *lp = netdev_priv(dev);
u_long iobase = dev->base_addr;
- int status = NETDEV_TX_OK;
u_long flags = 0;
netif_stop_queue(dev);
- if (!lp->tx_enable) { /* Cannot send for now */
+ if (!lp->tx_enable) /* Cannot send for now */
return NETDEV_TX_LOCKED;
- }
/*
** Clean out the TX ring asynchronously to interrupts - sometimes the
@@ -1521,7 +1520,7 @@ de4x5_queue_pkt(struct sk_buff *skb, str
lp->cache.lock = 0;
- return status;
+ return NETDEV_TX_OK;
}
/*
--- a/drivers/net/tulip/dmfe.c 2009-08-29 23:10:19.521492310 -0700
+++ b/drivers/net/tulip/dmfe.c 2009-08-29 23:12:54.129527736 -0700
@@ -311,7 +311,7 @@ static u8 SF_mode; /* Special Function:
/* function declaration ------------------------------------- */
static int dmfe_open(struct DEVICE *);
-static int dmfe_start_xmit(struct sk_buff *, struct DEVICE *);
+static netdev_tx_t dmfe_start_xmit(struct sk_buff *, struct DEVICE *);
static int dmfe_stop(struct DEVICE *);
static void dmfe_set_filter_mode(struct DEVICE *);
static const struct ethtool_ops netdev_ethtool_ops;
@@ -661,7 +661,8 @@ static void dmfe_init_dm910x(struct DEVI
* Send a packet to media from the upper layer.
*/
-static int dmfe_start_xmit(struct sk_buff *skb, struct DEVICE *dev)
+static netdev_tx_t dmfe_start_xmit(struct sk_buff *skb,
+ struct DEVICE *dev)
{
struct dmfe_board_info *db = netdev_priv(dev);
struct tx_desc *txptr;
--- a/drivers/net/tulip/tulip_core.c 2009-08-29 23:10:19.589491808 -0700
+++ b/drivers/net/tulip/tulip_core.c 2009-08-29 23:12:54.129527736 -0700
@@ -256,7 +256,8 @@ const char tulip_media_cap[32] =
static void tulip_tx_timeout(struct net_device *dev);
static void tulip_init_ring(struct net_device *dev);
static void tulip_free_ring(struct net_device *dev);
-static int tulip_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t tulip_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static int tulip_open(struct net_device *dev);
static int tulip_close(struct net_device *dev);
static void tulip_up(struct net_device *dev);
@@ -645,7 +646,7 @@ static void tulip_init_ring(struct net_d
tp->tx_ring[i-1].buffer2 = cpu_to_le32(tp->tx_ring_dma);
}
-static int
+static netdev_tx_t
tulip_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct tulip_private *tp = netdev_priv(dev);
--- a/drivers/net/tulip/uli526x.c 2009-08-29 23:10:19.637530461 -0700
+++ b/drivers/net/tulip/uli526x.c 2009-08-29 23:12:54.133492067 -0700
@@ -215,7 +215,8 @@ static int mode = 8;
/* function declaration ------------------------------------- */
static int uli526x_open(struct net_device *);
-static int uli526x_start_xmit(struct sk_buff *, struct net_device *);
+static netdev_tx_t uli526x_start_xmit(struct sk_buff *,
+ struct net_device *);
static int uli526x_stop(struct net_device *);
static void uli526x_set_filter_mode(struct net_device *);
static const struct ethtool_ops netdev_ethtool_ops;
@@ -567,7 +568,8 @@ static void uli526x_init(struct net_devi
* Send a packet to media from the upper layer.
*/
-static int uli526x_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t uli526x_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct uli526x_board_info *db = netdev_priv(dev);
struct tx_desc *txptr;
--- a/drivers/net/tulip/winbond-840.c 2009-08-29 23:10:19.537492110 -0700
+++ b/drivers/net/tulip/winbond-840.c 2009-08-29 23:12:54.133492067 -0700
@@ -333,7 +333,7 @@ static void init_registers(struct net_de
static void tx_timeout(struct net_device *dev);
static int alloc_ringdesc(struct net_device *dev);
static void free_ringdesc(struct netdev_private *np);
-static int start_tx(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev);
static irqreturn_t intr_handler(int irq, void *dev_instance);
static void netdev_error(struct net_device *dev, int intr_status);
static int netdev_rx(struct net_device *dev);
@@ -997,7 +997,7 @@ static void free_ringdesc(struct netdev_
}
-static int start_tx(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev)
{
struct netdev_private *np = netdev_priv(dev);
unsigned entry;
--- a/drivers/net/tulip/xircom_cb.c 2009-08-29 23:10:19.505491812 -0700
+++ b/drivers/net/tulip/xircom_cb.c 2009-08-29 23:12:54.137512691 -0700
@@ -113,7 +113,8 @@ struct xircom_private {
static int xircom_probe(struct pci_dev *pdev, const struct pci_device_id *id);
static void xircom_remove(struct pci_dev *pdev);
static irqreturn_t xircom_interrupt(int irq, void *dev_instance);
-static int xircom_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t xircom_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static int xircom_open(struct net_device *dev);
static int xircom_close(struct net_device *dev);
static void xircom_up(struct xircom_private *card);
@@ -384,7 +385,8 @@ static irqreturn_t xircom_interrupt(int
return IRQ_HANDLED;
}
-static int xircom_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t xircom_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct xircom_private *card;
unsigned long flags;
--
next prev parent reply other threads:[~2009-09-01 6:05 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-01 5:50 [PATCH 00/19] net_tx_t: network device transmit return value change Stephen Hemminger
2009-09-01 5:50 ` [PATCH 01/19] netdev: change transmit to limited range type Stephen Hemminger
2009-09-01 7:39 ` Eric Dumazet
2009-09-01 8:18 ` David Miller
2009-09-01 5:50 ` [PATCH 02/19] netdev: convert pseudo-devices to netdev_tx_t Stephen Hemminger
2009-09-01 5:50 ` [PATCH 03/19] convert ATM drivers " Stephen Hemminger
2009-09-01 5:50 ` [PATCH 04/19] convert hamradio drivers to netdev_txreturnt_t Stephen Hemminger
2009-09-01 15:30 ` Thomas Sailer
2009-09-01 5:50 ` [PATCH 05/19] isdn: convert to netdev_tx_t Stephen Hemminger
2009-09-01 5:50 ` [PATCH 06/19] usbnet: " Stephen Hemminger
2009-09-01 5:50 ` [PATCH 07/19] tokenring: " Stephen Hemminger
2009-09-01 5:50 ` [PATCH 08/19] wan: convert drivers " Stephen Hemminger
2009-09-01 5:50 ` [PATCH 09/19] hdlc: convert " Stephen Hemminger
2009-09-01 5:50 ` [PATCH 10/19] netdev: convert pcmcia drivers " Stephen Hemminger
2009-09-01 5:50 ` [PATCH 11/19] irda: convert " Stephen Hemminger
2009-09-01 5:50 ` [PATCH 12/19] netdev: convert pseudo drivers " Stephen Hemminger
2009-09-01 5:50 ` [PATCH 13/19] uwb: convert " Stephen Hemminger
[not found] ` <20090901055129.729527950-ZtmgI6mnKB3QT0dZR+AlfA@public.gmane.org>
2009-09-14 10:47 ` David Vrabel
2009-09-01 5:50 ` Stephen Hemminger [this message]
2009-09-02 5:48 ` [PATCH 14/19] tulip: convert drivers " Grant Grundler
2009-09-02 6:04 ` Stephen Hemminger
2009-09-02 6:08 ` Grant Grundler
2009-09-01 5:50 ` [PATCH 15/19] 3com: " Stephen Hemminger
2009-09-01 5:50 ` [PATCH 16/19] intel: " Stephen Hemminger
2009-09-02 1:03 ` Jeff Kirsher
2009-09-01 5:50 ` [PATCH 17/19] appletalk: " Stephen Hemminger
2009-09-01 5:50 ` [PATCH 18/19] wireless: " Stephen Hemminger
2009-09-01 5:50 ` Stephen Hemminger
2009-09-01 13:18 ` John W. Linville
2009-09-01 13:18 ` John W. Linville
2009-09-01 5:50 ` [PATCH 19/19] netdev: convert bulk of " Stephen Hemminger
2009-09-01 16:21 ` David Dillow
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090901055129.814907029@vyatta.com \
--to=shemminger@vyatta.com \
--cc=davem@davemloft.net \
--cc=grundler@parisc-linux.org \
--cc=kyle@mcmartin.ca \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.