From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from colin.muc.de ([193.149.48.1]:2819 "EHLO mail.muc.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754200AbZIDIht (ORCPT ); Fri, 4 Sep 2009 04:37:49 -0400 Date: Fri, 4 Sep 2009 10:29:56 +0200 From: Harald Milz To: linux-media@vger.kernel.org Cc: linux-dvb@linuxtv.org Subject: Re: [linux-dvb] TechnoTrend TT-connect S2-3650 CI Message-ID: <20090904082956.GB7618@seneca.muc.de> References: <200908122130.15270.jens.nixdorf@gmx.de> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <200908122130.15270.jens.nixdorf@gmx.de> Sender: linux-media-owner@vger.kernel.org List-ID: On Wed, Aug 12, 2009 at 09:30:15PM +0200, Jens Nixdorf wrote: > As Niels told you already, you cant use both types of driver. I own the > same DVB-S2-Box from Technotrend and i'm using it with VDR 1.7.0 in > ubuntu 9.04. I was following the wiki for installing s2-liplianin- > drivers, and since this time the box is running including its CI. Mine as well under openSUSE 11.1. The part should definitely get the "supported" status. I figure the s2-liaplianin tree need to me merged into the official tree then. As the S2-3200 card which is technically very similar except for the USB interface is officially supported in kernel 2.6.29, a respective hint should be added to the Wiki. I may test a 2.6.29 kernel for openSUSE 11.1 today and give some feedback. Same for the S2-3600 which is technically identical except for the CI. Any idea if the Satelco part (http://www.amazon.de/SATELCO-EasyWatch-HDTV-USB-DVB-S2/dp/B000X1C02W) is a OEM part of the S2-3650? > Maybe there could be some optimization (the log is full with some > bandwisth-messages from the stb6100-part), but it works at least good > enough for me. "modprobe ... verbose=0" helps. -- Save the Whales -- Harpoon a Honda.