Re: Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server+ Serial Log

Re: Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server+ Serial Log

[Boris Derzhavets]

[-- Attachment #1.1: Type: text/plain, Size: 1260 bytes --]

Thanks Pasi.
Serial log is attached.
Boris

--- On Wed, 9/9/09, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote:

From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server
To: "Boris Derzhavets" <bderzhavets@yahoo.com>
Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>
Date: Wednesday, September 9, 2009, 4:21 PM

On Wed, Sep 09, 2009 at 12:43:51PM -0700, Boris Derzhavets wrote:
> Problem with serial console output.
> 
> Grub Entry on testing box:-
> 
> title Xen 3.5 Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8)
>      kernel /xen-3.5.gz dom0_mem=1024M loglvl=all guest_loglvl=all com1=19200,8n1 console=com1
>      module /vmlinuz-2.6.31-rc8 ro root=/dev/sdc2 console=hvc0  earlyprintk=xen
>      module /initrd-2.6.31-rc8.img
> 
> On connected box in text mode:-
> 
> # cat /dev/ttyS0 | tee log
> 
> I am getting unreadable output

That might be due to baudrate not being set right. Can you use minicom instead (and obviously
set the right baudrate).

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel



      

[-- Attachment #1.2: Type: text/html, Size: 1905 bytes --]

[-- Attachment #2: serial904.log.gz --]
[-- Type: application/x-gzip, Size: 16898 bytes --]

[-- Attachment #3: Type: text/plain, Size: 138 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Re: Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server+ Serial Log

[Konrad Rzeszutek Wilk]

On Wed, Sep 09, 2009 at 10:35:34PM -0700, Boris Derzhavets wrote:
> Thanks Pasi.
> Serial log is attached.

OK. What about the boot _without_ Xen?
> Boris
> 
> --- On Wed, 9/9/09, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote:
> 
> From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server
> To: "Boris Derzhavets" <bderzhavets@yahoo.com>
> Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>
> Date: Wednesday, September 9, 2009, 4:21 PM
> 
> On Wed, Sep 09, 2009 at 12:43:51PM -0700, Boris Derzhavets wrote:
> > Problem with serial console output.
> > 
> > Grub Entry on testing box:-
> > 
> > title Xen 3.5 Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8)
> >      kernel /xen-3.5.gz dom0_mem=1024M loglvl=all guest_loglvl=all com1=19200,8n1 console=com1
> >      module /vmlinuz-2.6.31-rc8 ro root=/dev/sdc2 console=hvc0  earlyprintk=xen
> >      module /initrd-2.6.31-rc8.img
> > 
> > On connected box in text mode:-
> > 
> > # cat /dev/ttyS0 | tee log
> > 
> > I am getting unreadable output
> 
> That might be due to baudrate not being set right. Can you use minicom instead (and obviously
> set the right baudrate).
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
> 
> 
> 
>