From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] configure ppc440spe as pci adapter
Date: Fri, 11 Sep 2009 15:21:10 +0200 [thread overview]
Message-ID: <200909111521.10401.sr@denx.de> (raw)
In-Reply-To: <25389144.post@talk.nabble.com>
On Thursday 10 September 2009 21:01:57 dbrazeau wrote:
> I'm trying to get my ppc440spe (Katmai) board to initialize in PCI adapter
> mode. I was hoping that someone could give me some pointers on what
> changes I need in the katmai config file, i.e. do I need to define
> CONFIG_SYS_PCI_MASTER_INIT. Also I noticed that some ppc4xx have
> PCI_HOST_ADAPTER defined, but this is not defined in the Katmai config
> file. Should I define it and define CONFIG_PCI_HOST to it? Any comments
> are greatly appreciated. Thanks.
I don't know of any 440SPe based board used in PCI adapter mode. But you could
probably check the esd PMC440 board. This is a PPC440EPx based PMC module
which can be configured/built either as PCI host or as PCI adapter.
Cheers,
Stefan
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de
next prev parent reply other threads:[~2009-09-11 13:21 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-10 19:01 [U-Boot] configure ppc440spe as pci adapter dbrazeau
2009-09-11 13:21 ` Stefan Roese [this message]
2009-09-11 13:33 ` Wolfgang Denk
2009-09-14 15:56 ` dbrazeau
2009-09-14 22:47 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200909111521.10401.sr@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.