From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Delvare Date: Tue, 15 Sep 2009 16:55:45 +0000 Subject: Re: [lm-sensors] unhide_ICH_SMBus: line 33: Message-Id: <20090915185545.5f87ca81@hyperion.delvare> List-Id: References: <4A9122E1.7010006@ribosome.natur.cuni.cz> In-Reply-To: <4A9122E1.7010006@ribosome.natur.cuni.cz> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lm-sensors@vger.kernel.org On Tue, 15 Sep 2009 18:41:41 +0200, Martin MOKREJ=A6 wrote: > Jean Delvare wrote: > > On Tue, 15 Sep 2009 17:43:19 +0200, Martin MOKREJ=A6 wrote: > >> $ gzip -dc /proc/config.gz | grep THERMAL > >> CONFIG_ACPI_THERMAL=3Dy > >> CONFIG_THERMAL=3Dy > >> CONFIG_THERMAL_HWMON=3Dy > >> $ gzip -dc /proc/config.gz | grep ATK > >> CONFIG_KEYBOARD_ATKBD=3Dy > >> CONFIG_SENSORS_ATK0110=3Dy > >> $ > >> > >> These I have already in the kernel, so I can drop the whole SMbus thin= g? > >=20 > > Yes. >=20 > Ooops, are we talking about I2C_I801=3DN, I2C=3DN or SENSORS_DS1621=3DN? = ;-) ENSORS_DS1621=3DN and I2C_I801=3DN, yes. I2C=3DN, bad idea, you might need I2C support for something else. > Actually I had SENSORS_LM90=3DY as it was also proposed by sensors-detect. > That one was also mis-detected? I can't tell as your sensors-detect report was incomplete (with ds1621 loaded, sensors-detect can't probe the chip). I'm not sure why you are hard-building all the drivers that way, BTW, it makes investigating problems much harder. Probably the LM90 detection was correct, as these chips are much more reliably detected than the DS1621. Anyway, as further kernels say that ACPI is conflicting with the native SMBus controller driver, the only safe bet is to drop i2c-i801 and go with the ACPI thermal driver instead. --=20 Jean Delvare http://khali.linux-fr.org/wishlist.html _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors