From: Mitko Haralanov <voidtrance@comcast.net>
To: alsa-devel@alsa-project.org
Subject: S/PDIF on NVidia CK804 not working
Date: Sun, 20 Sep 2009 11:21:17 -0700 [thread overview]
Message-ID: <20090920112117.78a17dd2@nighthawk.voidtrance.net> (raw)
[-- Attachment #1: Type: text/plain, Size: 1266 bytes --]
Hi all,
I am new to the list and was hoping that someone here could give me
some help and advise as I am stuck and none of my research has turned
anything up.
I am having trouble getting any sound out of the S/PDIF port on my
built-in sound card. The card is recognized and 'aplay -L' shows the
iec958 device (as evident by the attached alsa-info.txt file) but when
I try to play any sound through it (using aplay) I get one of two
errors:
1. If I use the iec958 device directly:
$ aplay -D iec958 /usr/share/sounds/alsa/Front_Center.wav
Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit
Little Endian, Rate 48000 Hz, Mono aplay: set_params:984: Channels
count non available
2. If I try to use the plug:iec958:
$ aplay -D plug:iec958 /usr/share/sounds/alsa/Front_Center.wav
Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit
Little Endian, Rate 48000 Hz, Mono
(the sound file seems to play but there is no audio coming out of the
receiver)
Looking through the ALSA website, I see that my sound device is
supported. Configuring /etc/asound.conf and /etc/modprobe.conf as per
the ALSA website yields the same results as above.
Can anyone please, help me get my S/PDIF working?
Thank you very much!
--
Mitko Haralanov
[-- Attachment #2: alsa-info.txt --]
[-- Type: text/plain, Size: 33694 bytes --]
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.58
!!################################
!!Script ran on: Sun Sep 20 17:32:25 UTC 2009
!!Linux Distribution
!!------------------
!!DMI Information
!!---------------
Manufacturer: MICRO-STAR INTERNATIONAL CO., LTD
Product Name: MS-7125
!!Kernel Information
!!------------------
Kernel release: 2.6.27.9-159.fc10.x86_64
Operating System: GNU/Linux
Architecture: x86_64
Processor: x86_64
SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version: 1.0.18a
Library version:
Utilities version: 1.0.21
!!Loaded ALSA modules
!!-------------------
snd_intel8x0
!!Sound Servers on this system
!!----------------------------
aRts:
Installed - Yes (/usr/bin/artsd)
Running - No
Jack:
Installed - Yes (/usr/bin/jackd)
Running - No
!!Soundcards recognised by ALSA
!!-----------------------------
0 [CK804 ]: NFORCE - NVidia CK804
NVidia CK804 with ALC850 at irq 22
!!PCI Soundcards installed in the system
!!--------------------------------------
00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2)
01:06.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
01:07.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
01:08.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
01:09.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
01:09.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
!!Advanced information - PCI Vendor/Device/Susbsystem ID's
!!--------------------------------------------------------
00:04.0 0401: 10de:0059 (rev a2)
Subsystem: 1462:7585
!!Loaded sound module options
!!--------------------------
!!Module: snd_intel8x0
ac97_clock : 0
ac97_quirk : <NULL>
buggy_irq : Y
buggy_semaphore : N
enable : N
id : <NULL>
index : -1
joystick : 0
spdif_aclink : 0
xbox : N
!!AC97 Codec information
!!---------------------------
--startcollapse--
0-0/0: Realtek ALC850 rev 0
PCI Subsys Vendor: 0x1462
PCI Subsys Device: 0x7585
Revision : 0x00
Compat. Class : 0x00
Subsys. Vendor ID: 0xffff
Subsys. ID : 0xffff
Capabilities :
DAC resolution : 16-bit
ADC resolution : 16-bit
3D enhancement : No 3D Stereo Enhancement
Current setup
Mic gain : +0dB [+0dB]
POP path : pre 3D
Sim. stereo : off
3D enhancement : off
Loudness : off
Mono output : MIX
Mic select : Mic1
ADC/DAC loopback : off
Double rate slots: 7/8
Extended ID : codec=0 rev=2 LDAC SDAC CDAC DSA=0 SPDIF DRA
Extended status : PRK PRJ PRI SPCV SPDIF=10/11 SPDIF
SPDIF Control : Consumer PCM Category=0x2 Generation=1 Rate=48kHz
0:00 = 0000
0:02 = 0e0e
0:04 = 0000
0:06 = 000e
0:08 = 0000
0:0a = 000e
0:0c = 801f
0:0e = 801f
0:10 = 9f1f
0:12 = 1616
0:14 = 0000
0:16 = 9f1f
0:18 = 1616
0:1a = 0000
0:1c = 0d0d
0:1e = 0000
0:20 = 0400
0:22 = 0000
0:24 = 0000
0:26 = 030c
0:28 = 09c6
0:2a = 3c34
0:2c = bb80
0:2e = bb80
0:30 = bb80
0:32 = bb80
0:34 = 0000
0:36 = 9f80
0:38 = 9f9f
0:3a = 2824
0:3c = 0000
0:3e = 0000
0:40 = 0000
0:42 = 0000
0:44 = 0000
0:46 = 0000
0:48 = 0000
0:4a = 0000
0:4c = 0000
0:4e = 0000
0:50 = 0000
0:52 = 0000
0:54 = 0000
0:56 = 0000
0:58 = 0000
0:5a = 0000
0:5c = 0000
0:5e = 0000
0:60 = 0000
0:62 = 0000
0:64 = 0808
0:66 = 0808
0:68 = 0a0a
0:6a = 8400
0:6c = 0000
0:6e = 0017
0:70 = c5a0
0:72 = 00c0
0:74 = 8388
0:76 = aad0
0:78 = 1c8f
0:7a = 10e2
0:7c = 414c
0:7e = 4790
--endcollapse--
!!ALSA Device nodes
!!-----------------
crw-rw----+ 1 root root 116, 8 Sep 20 10:22 /dev/snd/controlC0
crw-rw----+ 1 root root 116, 7 Sep 20 10:22 /dev/snd/pcmC0D0c
crw-rw----+ 1 root root 116, 6 Sep 20 10:22 /dev/snd/pcmC0D0p
crw-rw----+ 1 root root 116, 5 Sep 20 10:22 /dev/snd/pcmC0D1c
crw-rw----+ 1 root root 116, 4 Sep 20 10:22 /dev/snd/pcmC0D2p
crw-rw----+ 1 root root 116, 3 Sep 20 10:22 /dev/snd/seq
crw-rw----+ 1 root root 116, 2 Sep 20 10:22 /dev/snd/timer
!!ALSA configuration files
!!------------------------
!!User specific config file (~/.asoundrc)
# ~/.asoundrc or /etc/asound.conf
# ALSA configuration file
##### USAGE #####
# Save this file as "~/.asoundrc" (for user-specific sound configuration) or
# "/etc/asound.conf" (for system-wide sound configuration) and specify ALSA
# device names ad described in the next section.
##### DEVICE NAMES #####
# This configuration file defines four devices for use by the user. Those
# devices are "analog", "mixed-analog", "digital", and "mixed-digital". The
# user may also re-define "default" to be identical to one of the above-named
# devices (i.e. to send all sound output to the digital output unless otherwise
# specified). Use the device names as described below:
# - "analog" outputs to the analog output directly and (at least on software
# sound cards) blocks other audio output. After playback completes, "queued"
# sounds are output in sequence.
# - "mixed-analog" mixes audio output from multiple programs into the analog
# output (so you can hear beeps, alerts, and other noises while playing back
# an audio stream).
# - "digital" outputs to the digital output directly. Since most (all?)
# digital outputs expect 48kHz PCM audio, this may not work for some playback
# (i.e. CD's--which are 44.1kHz PCM audio--or 32kHz audio streams from TV
# recordings, etc.).
# - "mixed-digital"
# All other devices created within this file are used only by the configuration
# file itself and should /not/ be used directly. In other words, do not use
# the devices "analog-hw", "dmix-analog", "digital-hw", or "dmix-digital".
##### IMPORTANT #####
# To make this ALSA configuration file work with your sound card, you will need
# to define the appropriate card and device information for the "analog-hw" and
# "digital-hw" devices below. You can find the card and device information
# using "aplay -l".
##### Configuration File #####
# Override the default output used by ALSA. If you do not override the
# default, your default device is identical to the (unmixed) "analog" device
# shown below. If you prefer mixed and/or digital output, uncomment the
# appropriate four lines below (only one slave.pcm line).
#
# Note, also, that as of ALSA 1.0.9, "software" sound cards have been modified
# such that their default "default" device is identical to the "mixed-analog"
# device. Whether using an ALSA version before or after 1.0.9, it does no harm
# and has no affect on performance to redefine the device (even if the
# redefinition does not change anything). Also, by using this ALSA
# configuration file, you once again have access to unmixed analog output using
# the "analog" device.
pcm.!default {
type plug
## Uncomment the following to use "mixed-analog" by default
# slave.pcm "dmix-analog"
## Uncomment the following to use (unmixed) "digital" by default
slave.pcm "digital-hw"
## Uncomment the following to use "mixed-digital" by default
# slave.pcm "dmix-digital"
}
# Control device (mixer, etc.) for the card
ctl.!default {
type hw
card 0
}
# Alias for (converted) analog output on the card
# - This is identical to the device named "default"--which always exists and
# refers to hw:0,0 (unless overridden)
# - Therefore, we can specify "hw:0,0", "default", or "analog" to access analog
# output on the card
# - Note that as of ALSA 1.0.9, "software" sound card definitions redefine
# "default" to do mixing, meaning this device is different from "default" and
# allows playback while blocking other sound sources (until playback
# completes).
pcm.analog {
type plug
slave.pcm "analog-hw"
}
# Control device (mixer, etc.) for the card
ctl.analog {
type hw
card 0
}
# Alias for (converted) mixed analog output on the card
# - This will accept audio input--regardless of rate--and convert to the rate
# required for the dmix plugin (in this case 48000Hz)
# - Note that as of ALSA 1.0.9, "software" sound card definitions redefine
# "default" to do mixing, meaning this device is identical to "default" for
# "software" sound cards.
pcm.mixed-analog {
type plug
slave.pcm "dmix-analog"
}
# Control device (mixer, etc.) for the card
ctl.mixed-analog {
type hw
card 0
}
# Alias for (converted) digital (S/PDIF) output on the card
# - This will accept audio input--regardless of rate--and convert to the rate
# required for the S/PDIF hardware (in this case 48000Hz)
pcm.digital {
type plug
slave.pcm "digital-hw"
}
# Control device (mixer, etc.) for the card
ctl.digital {
type hw
card 0
}
# Alias for mixed (converted) digital (S/PDIF) output on the card
# - This will accept audio input--regardless of rate--and convert to the rate
# required for the S/PDIF hardware (in this case 48000Hz)
pcm.mixed-digital {
type plug
slave.pcm "dmix-digital"
}
# Control device (mixer, etc.) for the card
ctl.mixed-digital {
type hw
card 0
}
# The following devices are not useful by themselves. They require specific
# rates, channels, and formats. Therefore, you probably do not want to use
# them directly. Instead use of of the devices defined above.
# Alias for analog output on the card
# Do not use this directly--it requires specific rate, channels, and format
pcm.analog-hw {
type hw
card 0
# The default value for device is 0, so no need to specify
# - Uncomment one of the below or create a new "device N" line as appropriate
# for your sound card or
# device 1
# device 4
}
# Control device (mixer, etc.) for the card
ctl.analog-hw {
type hw
card 0
}
# Alias for digital (S/PDIF) output on the card
# Do not use this directly--it requires specific rate, channels, and format
pcm.digital-hw {
type hw
card 0
# device 1
# - Comment out "device 1" above and uncomment one of the below or create a
# new "device N" line as appropriate for your sound card or
device 2
# device 4
}
# Control device (mixer, etc.) for the card
ctl.digital-hw {
type hw
card 0
}
# Direct software mixing plugin for analog output on the card
# Do not use this directly--it requires specific rate, channels, and format
pcm.dmix-analog {
type dmix
ipc_key 1234
slave {
pcm "analog-hw"
period_time 0
period_size 1024
buffer_size 4096
rate 48000
}
}
# Control device (mixer, etc.) for the card
ctl.dmix-analog {
type hw
card 0
}
# Direct software mixing plugin for digital (S/PDIF) output on the card
# Do not use this directly--it requires specific rate, channels, and format
pcm.dmix-digital {
type dmix
ipc_key 1235
slave {
pcm "digital-hw"
period_time 0
period_size 1024
buffer_size 4096
rate 48000
}
}
# Control device (mixer, etc.) for the card
ctl.dmix-digital {
type hw
card 0
}
!!System wide config file (/etc/asound.conf)
# ~/.asoundrc or /etc/asound.conf
# ALSA configuration file
##### USAGE #####
# Save this file as "~/.asoundrc" (for user-specific sound configuration) or
# "/etc/asound.conf" (for system-wide sound configuration) and specify ALSA
# device names ad described in the next section.
##### DEVICE NAMES #####
# This configuration file defines four devices for use by the user. Those
# devices are "analog", "mixed-analog", "digital", and "mixed-digital". The
# user may also re-define "default" to be identical to one of the above-named
# devices (i.e. to send all sound output to the digital output unless otherwise
# specified). Use the device names as described below:
# - "analog" outputs to the analog output directly and (at least on software
# sound cards) blocks other audio output. After playback completes, "queued"
# sounds are output in sequence.
# - "mixed-analog" mixes audio output from multiple programs into the analog
# output (so you can hear beeps, alerts, and other noises while playing back
# an audio stream).
# - "digital" outputs to the digital output directly. Since most (all?)
# digital outputs expect 48kHz PCM audio, this may not work for some playback
# (i.e. CD's--which are 44.1kHz PCM audio--or 32kHz audio streams from TV
# recordings, etc.).
# - "mixed-digital"
# All other devices created within this file are used only by the configuration
# file itself and should /not/ be used directly. In other words, do not use
# the devices "analog-hw", "dmix-analog", "digital-hw", or "dmix-digital".
##### IMPORTANT #####
# To make this ALSA configuration file work with your sound card, you will need
# to define the appropriate card and device information for the "analog-hw" and
# "digital-hw" devices below. You can find the card and device information
# using "aplay -l".
##### Configuration File #####
# Override the default output used by ALSA. If you do not override the
# default, your default device is identical to the (unmixed) "analog" device
# shown below. If you prefer mixed and/or digital output, uncomment the
# appropriate four lines below (only one slave.pcm line).
#
# Note, also, that as of ALSA 1.0.9, "software" sound cards have been modified
# such that their default "default" device is identical to the "mixed-analog"
# device. Whether using an ALSA version before or after 1.0.9, it does no harm
# and has no affect on performance to redefine the device (even if the
# redefinition does not change anything). Also, by using this ALSA
# configuration file, you once again have access to unmixed analog output using
# the "analog" device.
pcm.!default {
type plug
## Uncomment the following to use "mixed-analog" by default
# slave.pcm "dmix-analog"
## Uncomment the following to use (unmixed) "digital" by default
slave.pcm "digital-hw"
## Uncomment the following to use "mixed-digital" by default
# slave.pcm "dmix-digital"
}
# Control device (mixer, etc.) for the card
ctl.!default {
type hw
card 0
}
# Alias for (converted) analog output on the card
# - This is identical to the device named "default"--which always exists and
# refers to hw:0,0 (unless overridden)
# - Therefore, we can specify "hw:0,0", "default", or "analog" to access analog
# output on the card
# - Note that as of ALSA 1.0.9, "software" sound card definitions redefine
# "default" to do mixing, meaning this device is different from "default" and
# allows playback while blocking other sound sources (until playback
# completes).
pcm.analog {
type plug
slave.pcm "analog-hw"
}
# Control device (mixer, etc.) for the card
ctl.analog {
type hw
card 0
}
# Alias for (converted) mixed analog output on the card
# - This will accept audio input--regardless of rate--and convert to the rate
# required for the dmix plugin (in this case 48000Hz)
# - Note that as of ALSA 1.0.9, "software" sound card definitions redefine
# "default" to do mixing, meaning this device is identical to "default" for
# "software" sound cards.
pcm.mixed-analog {
type plug
slave.pcm "dmix-analog"
}
# Control device (mixer, etc.) for the card
ctl.mixed-analog {
type hw
card 0
}
# Alias for (converted) digital (S/PDIF) output on the card
# - This will accept audio input--regardless of rate--and convert to the rate
# required for the S/PDIF hardware (in this case 48000Hz)
pcm.digital {
type plug
slave.pcm "digital-hw"
}
# Control device (mixer, etc.) for the card
ctl.digital {
type hw
card 0
}
# Alias for mixed (converted) digital (S/PDIF) output on the card
# - This will accept audio input--regardless of rate--and convert to the rate
# required for the S/PDIF hardware (in this case 48000Hz)
pcm.mixed-digital {
type plug
slave.pcm "dmix-digital"
}
# Control device (mixer, etc.) for the card
ctl.mixed-digital {
type hw
card 0
}
# The following devices are not useful by themselves. They require specific
# rates, channels, and formats. Therefore, you probably do not want to use
# them directly. Instead use of of the devices defined above.
# Alias for analog output on the card
# Do not use this directly--it requires specific rate, channels, and format
pcm.analog-hw {
type hw
card 0
# The default value for device is 0, so no need to specify
# - Uncomment one of the below or create a new "device N" line as appropriate
# for your sound card or
# device 1
# device 4
}
# Control device (mixer, etc.) for the card
ctl.analog-hw {
type hw
card 0
}
# Alias for digital (S/PDIF) output on the card
# Do not use this directly--it requires specific rate, channels, and format
pcm.digital-hw {
type hw
card 0
# device 1
# - Comment out "device 1" above and uncomment one of the below or create a
# new "device N" line as appropriate for your sound card or
device 2
# device 4
}
# Control device (mixer, etc.) for the card
ctl.digital-hw {
type hw
card 0
}
# Direct software mixing plugin for analog output on the card
# Do not use this directly--it requires specific rate, channels, and format
pcm.dmix-analog {
type dmix
ipc_key 1234
slave {
pcm "analog-hw"
period_time 0
period_size 1024
buffer_size 4096
rate 48000
}
}
# Control device (mixer, etc.) for the card
ctl.dmix-analog {
type hw
card 0
}
# Direct software mixing plugin for digital (S/PDIF) output on the card
# Do not use this directly--it requires specific rate, channels, and format
pcm.dmix-digital {
type dmix
ipc_key 1235
slave {
pcm "digital-hw"
period_time 0
period_size 1024
buffer_size 4096
rate 48000
}
}
# Control device (mixer, etc.) for the card
ctl.dmix-digital {
type hw
card 0
}
!!Aplay/Arecord output
!!------------
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: CK804 [NVidia CK804], device 0: Intel ICH [NVidia CK804]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: CK804 [NVidia CK804], device 2: Intel ICH - IEC958 [NVidia CK804 - IEC958]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: CK804 [NVidia CK804], device 0: Intel ICH [NVidia CK804]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: CK804 [NVidia CK804], device 1: Intel ICH - MIC ADC [NVidia CK804 - MIC ADC]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [CK804]
Card hw:0 'CK804'/'NVidia CK804 with ALC850 at irq 22'
Mixer name : 'Realtek ALC850 rev 0'
Components : 'AC97a:414c4790'
Controls : 42
Simple ctrls : 27
Simple mixer control 'Master',0
Capabilities: pvolume pswitch pswitch-joined
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 17 [55%] [-21.00dB] [on]
Front Right: Playback 17 [55%] [-21.00dB] [on]
Simple mixer control 'Master Mono',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 17 [55%] [-21.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume pswitch pswitch-joined
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 9 [29%] [-21.00dB] [on]
Front Right: Playback 9 [29%] [-21.00dB] [on]
Simple mixer control 'Surround',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-46.50dB] [off]
Front Right: Playback 0 [0%] [-46.50dB] [off]
Simple mixer control 'Surround Jack Mode',0
Capabilities: enum
Items: 'Shared' 'Independent'
Item0: 'Shared'
Simple mixer control 'Center',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 31 [100%] [0.00dB] [off]
Simple mixer control 'LFE',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 0 [0%] [-46.50dB] [off]
Simple mixer control 'Line',0
Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Simple mixer control 'CD',0
Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 9 [29%] [-21.00dB] [on] Capture [off]
Front Right: Playback 9 [29%] [-21.00dB] [on] Capture [off]
Simple mixer control 'Mic',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-exclusive
Capture exclusive group: 0
Playback channels: Mono
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono: Playback 0 [0%] [-34.50dB] [off]
Front Left: Capture [on]
Front Right: Capture [on]
Simple mixer control 'Mic Boost (+20dB)',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Mic Front Input',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Mic Select',0
Capabilities: enum
Items: 'Mic1' 'Mic2'
Item0: 'Mic1'
Simple mixer control 'Video',0
Capabilities: cswitch cswitch-exclusive
Capture exclusive group: 0
Capture channels: Front Left - Front Right
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'Phone',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-exclusive
Capture exclusive group: 0
Playback channels: Mono
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono: Playback 0 [0%] [-34.50dB] [off]
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined cswitch cswitch-joined
Playback channels: Mono
Capture channels: Mono
Mono: Playback [on] Capture [off]
Simple mixer control 'IEC958 Playback AC97-SPSA',0
Capabilities: volume volume-joined
Playback channels: Mono
Capture channels: Mono
Limits: 0 - 3
Mono: 3 [100%]
Simple mixer control 'IEC958 Playback Source',0
Capabilities: enum
Items: 'PCM' 'Analog In' 'IEC958 In'
Item0: 'PCM'
Simple mixer control 'PC Speaker',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 15
Mono: Playback 8 [53%] [-21.00dB] [on]
Simple mixer control 'Aux',0
Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Simple mixer control 'Mono Output Select',0
Capabilities: enum
Items: 'Mix' 'Mic'
Item0: 'Mix'
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch cswitch-joined
Capture channels: Front Left - Front Right
Limits: Capture 0 - 15
Front Left: Capture 13 [87%] [19.50dB] [on]
Front Right: Capture 13 [87%] [19.50dB] [on]
Simple mixer control 'Mix',0
Capabilities: cswitch cswitch-exclusive
Capture exclusive group: 0
Capture channels: Front Left - Front Right
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'Mix Mono',0
Capabilities: cswitch cswitch-exclusive
Capture exclusive group: 0
Capture channels: Front Left - Front Right
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'Channel Mode',0
Capabilities: enum
Items: '2ch' '4ch' '6ch' '8ch'
Item0: '6ch'
Simple mixer control 'Duplicate Front',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'External Amplifier',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
!!Alsactl output
!!-------------
--startcollapse--
state.CK804 {
control.1 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Master Playback Switch'
value true
}
control.2 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
comment.dbmin -4650
comment.dbmax 0
iface MIXER
name 'Master Playback Volume'
value.0 17
value.1 17
}
control.3 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Center Playback Switch'
value false
}
control.4 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 31'
comment.dbmin -4650
comment.dbmax 0
iface MIXER
name 'Center Playback Volume'
value 31
}
control.5 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'LFE Playback Switch'
value false
}
control.6 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 31'
comment.dbmin -4650
comment.dbmax 0
iface MIXER
name 'LFE Playback Volume'
value 0
}
control.7 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Surround Playback Switch'
value.0 false
value.1 false
}
control.8 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
comment.dbmin -4650
comment.dbmax 0
iface MIXER
name 'Surround Playback Volume'
value.0 0
value.1 0
}
control.9 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Master Mono Playback Switch'
value true
}
control.10 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 31'
comment.dbmin -4650
comment.dbmax 0
iface MIXER
name 'Master Mono Playback Volume'
value 17
}
control.11 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'PC Speaker Playback Switch'
value true
}
control.12 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 15'
comment.dbmin -4500
comment.dbmax 0
iface MIXER
name 'PC Speaker Playback Volume'
value 8
}
control.13 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Phone Playback Switch'
value false
}
control.14 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 31'
comment.dbmin -3450
comment.dbmax 1200
iface MIXER
name 'Phone Playback Volume'
value 0
}
control.15 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Mic Playback Switch'
value false
}
control.16 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 31'
comment.dbmin -3450
comment.dbmax 1200
iface MIXER
name 'Mic Playback Volume'
value 0
}
control.17 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Mic Boost (+20dB)'
value false
}
control.18 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Line Playback Switch'
value false
}
control.19 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
comment.dbmin -3450
comment.dbmax 1200
iface MIXER
name 'Line Playback Volume'
value.0 0
value.1 0
}
control.20 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'CD Playback Switch'
value true
}
control.21 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
comment.dbmin -3450
comment.dbmax 1200
iface MIXER
name 'CD Playback Volume'
value.0 9
value.1 9
}
control.22 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Aux Playback Switch'
value false
}
control.23 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
comment.dbmin -3450
comment.dbmax 1200
iface MIXER
name 'Aux Playback Volume'
value.0 0
value.1 0
}
control.24 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'PCM Playback Switch'
value true
}
control.25 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
comment.dbmin -3450
comment.dbmax 1200
iface MIXER
name 'PCM Playback Volume'
value.0 9
value.1 9
}
control.26 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 2
comment.item.0 Mic
comment.item.1 CD
comment.item.2 Video
comment.item.3 Aux
comment.item.4 Line
comment.item.5 Mix
comment.item.6 'Mix Mono'
comment.item.7 Phone
iface MIXER
name 'Capture Source'
value.0 Mic
value.1 Mic
}
control.27 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Capture Switch'
value true
}
control.28 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 15'
comment.dbmin 0
comment.dbmax 2250
iface MIXER
name 'Capture Volume'
value.0 13
value.1 13
}
control.29 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Mix
comment.item.1 Mic
iface MIXER
name 'Mono Output Select'
value Mix
}
control.30 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Mic1
comment.item.1 Mic2
iface MIXER
name 'Mic Select'
value Mic1
}
control.31 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.32 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Pro Mask'
value cf00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
}
control.33 {
comment.access 'read write'
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Default'
value '0082000200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.34 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Playback Switch'
value true
}
control.35 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 3'
iface MIXER
name 'IEC958 Playback AC97-SPSA'
value 3
}
control.36 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Duplicate Front'
value false
}
control.37 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Mic Front Input Switch'
value false
}
control.38 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Shared
comment.item.1 Independent
iface MIXER
name 'Surround Jack Mode'
value Shared
}
control.39 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 '2ch'
comment.item.1 '4ch'
comment.item.2 '6ch'
comment.item.3 '8ch'
iface MIXER
name 'Channel Mode'
value '6ch'
}
control.40 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Capture Switch'
value false
}
control.41 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 PCM
comment.item.1 'Analog In'
comment.item.2 'IEC958 In'
iface MIXER
name 'IEC958 Playback Source'
value PCM
}
control.42 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'External Amplifier'
value true
}
}
--endcollapse--
!!All Loaded Modules
!!------------------
Module
nls_utf8
cifs
fuse
autofs4
sunrpc
ip6t_REJECT
nf_conntrack_ipv6
ip6table_filter
ip6_tables
ipv6
or51132
cx88_dvb
cx88_vp3054_i2c
msp3400
videobuf_dvb
saa7115
dvb_core
tuner_simple
tuner_types
tda9887
tda8290
tuner
cx8800
ivtv
snd_intel8x0
cx8802
snd_ac97_codec
ac97_bus
cx88xx
snd_seq_dummy
compat_ioctl32
videodev
snd_seq_oss
snd_seq_midi_event
firewire_ohci
ir_common
i2c_algo_bit
firewire_core
crc_itu_t
snd_seq
v4l1_compat
cx2341x
sata_nv
snd_seq_device
btcx_risc
videobuf_dma_sg
v4l2_common
snd_pcm_oss
snd_mixer_oss
tveeprom
videobuf_core
snd_pcm
i2c_nforce2
i2c_core
snd_timer
k8temp
shpchp
snd
soundcore
hwmon
snd_page_alloc
ppdev
forcedeth
parport_pc
pcspkr
joydev
parport
serio_raw
lirc_mceusb
floppy
lirc_dev
ata_generic
pata_acpi
pata_amd
!!ALSA/HDA dmesg
!!------------------
[-- Attachment #3: Type: text/plain, Size: 160 bytes --]
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next reply other threads:[~2009-09-20 18:21 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-20 18:21 Mitko Haralanov [this message]
2009-09-20 18:23 ` S/PDIF on NVidia CK804 not working Robert Hancock
2009-09-20 18:47 ` Mitko Haralanov
2009-09-21 16:15 ` Mitko Haralanov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090920112117.78a17dd2@nighthawk.voidtrance.net \
--to=voidtrance@comcast.net \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.