Re: MSI Digivox mini III Remote Control

[Roman <lists@hasnoname.de>]

Hi,

thx for the tip, i jusst tested it on Windows 7 and i was amazed....
Not only the remote worked perfectly out of the box, also the software used 
(some media-center from ArcSoft), worked flawless. (I last used a Hauppauge 
TV-Card about 2 years ago on windows).
One thing to note is the channel switching was a LOT faster (max. 1sec.) than 
on linux (sometimes > 5sec.).

Anyway, the remote works on windows, no i am trying to compile the mentioned 
repository, but it seems to fail compiling.
I already sent a mail to the msi-support...

#------
make[2]: Entering directory `/home/strowi/src/zen-sources'
  CC [M]  /home/strowi/src/af9015-digivox3_remote/v4l/au0828-cards.o
In file included from /home/strowi/src/af9015-digivox3_remote/v4l/dmxdev.h:33,
                 from /home/strowi/src/af9015-digivox3_remote/v4l/au0828.h:29,
                 
from /home/strowi/src/af9015-digivox3_remote/v4l/au0828-cards.c:22:
/home/strowi/src/af9015-digivox3_remote/v4l/compat.h:385: error: redefinition 
of 'usb_endpoint_type'
include/linux/usb/ch9.h:377: error: previous definition of 'usb_endpoint_type' 
was here
make[3]: *** [/home/strowi/src/af9015-digivox3_remote/v4l/au0828-cards.o] 
Error 1
#------

Am Monday 21 September 2009 10:19:33 schrieb Aleksandr V. Piskunov:
> Well, it seems there is a patch for Digivox mini III remote control at
> http://linuxtv.org/hg/~anttip/af9015-digivox3_remote/, perhaps Antti
> can tell you more about it.
>
> I got this tuner, and no, IR receiver doesn't work for me, it doesn't
> even work in WinXP with bundled drivers and software, tested with
> USB snoop, no reaction to keypresses. Maybe a hardware defect at
> receiver part, maybe something is missing in a firmware, no idea.
>
> So check it on some Windows system first, then try patch..
>

greetings,
Roman
-- 
Iron Law of Distribution:
	Them that has, gets.